Resetting the service interval display
If the service interval display was not reset after the oil change service or inspection service, the display can be reset as follows:
Vehicles with a digital instrument cluster: The service interval display can only be reset through the service menu ⇒ Service menu.
Do not reset the service interval display between service intervals or incorrect information will be displayed.
If the oil change service interval was manually reset, the service interval display then also switches to a fixed service interval, even on vehicles with the flexible oil
change service interval.
The service message disappears automatically after a few seconds when the engine is running or when the
is pressed.
button on the multi-function steering wheel
If the 12 V vehicle battery in a vehicle with the flexible service interval has been disconnected for an extended period, the time for the next oil change service
cannot be calculated. Therefore, the service interval displays may show incorrect calculations. If this is the case, follow the maximum permissible maintenance
intervals.
Time
Setting the time in the Infotainment system
1. Depending on the design, press the
button or function key and open the Vehicle menu.
button or function key.
Or: depending on the vehicle equipment, press the
2. Depending on how your vehicle is equipped, open the Settings menu.
3. Select the Time and date menu item to set the time.
Setting the Time in the Volkswagen Digital Cockpit Pro
1. Select the Range information profile.
2. Press and hold the
button on the multi-function steering wheel until the service menu is available in the instrument cluster display ⇒ Service menu.
3. Select Time menu.
4. Set the correct time using the
or
arrow buttons.
Sport displays
Lap timer in the instrument cluster
The lap timer offers the option to
measure and save the individual lap
times on a race course manually in the
vehicle as well as compare these times
to the best times previously recorded.
Depending on the equipment, the lap timer can be displayed in the instrument cluster.
The following main menus can be displayed:
Lap timer.
Lap (with current lap specification).
Statistics.
Switching between menus
1. Press the
or
button on the multi-function steering wheel.
For example, the following list will show the layout of the menus in the instrument cluster display. The actual scope of the menus and the names of individual menu
items depend on the instrument cluster version and the vehicle electronics.
Menu displays and functions
Lap timer menu:
Start
The time measurement of a lap is started.
Since start The time measurement begins when the vehicle begins to drive. If it is already moving, the time measurement starts when the vehicle comes to a
stop in the meantime.
Statistics An overview of the laps previously recorded is displayed.
Lap menu:
Stop
The active time measurement is paused. The lap is not finished.
Resume The paused time measurement is resumed.
Split time A split time is displayed for approximately five seconds. The active time measurement continues to run simultaneously.
26
English 
