Get Driver information -> Service Guide for Volkswagen Arteon 4 Door First Generation (2017-2024)

1. Press the

button on the multi-function steering wheel.

Switching memories

Vehicles with multi-function steering wheel:

1. Press the

button on the multi-function steering wheel.

Since start memory

If the trip is interrupted for more than two hours, the memory is erased.

Since refuel memory

Display and memory of the collective driving and consumption data. The memory is erased when the vehicle is refueled.

Extended period memory

The memory collects the driving data up to 19 hours and 59 minutes or 99 hours and 59 minutes driving time or 1999.9 km (miles) or 9999.9 km (miles) distance

driven. If one of these maximum thresholds is met, the memory is erased. The maximum thresholds may vary depending on the version of the instrument cluster.

Erasing the driving data memory

Vehicles with multi-function steering wheel:

1. Select the memory to be erased.

2. Press the

button on the multi-function steering wheel.

Setting a speed warning

Vehicles with multi-function steering wheel:

1. Select the Warning at --- km/h or Warning at --- mph display.

2. Press the

button on the multi-function steering wheel to save the current speed and to activate the warning.

3. Set the speed on the multi-function steering wheel within approximately ﬁve seconds by pressing the

or wait several seconds.

and

arrow buttons. Then press the

button

The speed will then be saved and the warning will be activated.

4. Press the

button again to deactivate.

The stored speed is erased.

The warning can be set for speeds between 18 mph (30 km/h) and 155 mph (250 km/h).

Depending on the country, a single warning tone sounds at speeds of over approximately 80 km/h (approximately 50 mph), and from approximately 120 km/h

(approximately 75 mph), a continuous warning tone sounds. The

by law and cannot be altered.

indicator light will also be displayed in the instrument cluster display. This warning is required

Driving Data in the Infotainment system

Driving Data can be displayed in the Infotainment system, in addition to being displayed in the instrument cluster.

Selecting Displays

You can select the driving data you would like to display using the vehicle settings in the Infotainment system ⇒ Vehicle settings menu.

Consumption

The average fuel consumption is displayed after approximately 300 m (984 ft).

Range

This indicates the approximate distance in km (miles) the vehicle can travel under the same driving conditions.

Speed

The average speed is displayed after approximately 100 m (approximately 328 ft).

WARNING

If the driver is distracted while driving, accidents and serious injuries can occur.

Never operate the instrument cluster while driving.

Only adjust any settings in the instrument cluster or Infotainment system when the vehicle is stationary.

Service

Service menu

Depending on the equipment, settings can be applied in the service menu.

Opening the Service Menu

1. Select the Range information proﬁle in the instrument cluster.

2. Press and hold the

button on the multifunction steering wheel for approximately four seconds.

3. Navigate in the menu using the buttons on the multi-function steering wheel.

Resetting the service interval display

1. Select Service menu.

2. Follow the instructions in the instrument cluster display.

Resetting the oil change service

1. Select Reset oil change service menu.

2. Follow the instructions in the instrument cluster display.

Resetting the trip odometer

1. Select Reset trip menu.

2. Follow the instructions in the instrument cluster display.

Displaying the engine code

1. Select Engine code menu.

The engine code is shown on the instrument cluster display.

Setting the time

1. Select Time menu.

2. Set the time with the

and

arrow buttons.

Displaying copyright information

1. Select the Copyright menu to access the copyright information.

Service interval display

Displays about service events appear in the instrument cluster display and in the Infotainment system. There are different versions of the instrument cluster and

Infotainment system; therefore, the appearances of the displays may vary.

Service appointments at Volkswagen are divided into oil change services and inspections. The service interval display informs the driver about the next service

appointment which includes an engine oil change and about the next inspection.

The service intervals are speciﬁed for vehicles with the ﬁxed oil change service interval.

Intervals are determined individually on vehicles with the ﬂexible oil change service interval. Oil change services only need to be performed if the vehicle requires it

The speciﬁc operating conditions and the personal driving style are also taken into consideration. The service early warning message is ﬁrst displayed 30 days prio

to the calculated oil change service due date. The displayed remaining distance to be traveled is always rounded to 100 km (miles) and the remaining time is

rounded to whole days.

Service notiﬁcation

If an oil change service or an inspection service is due in the near future, a service notiﬁcation will be displayed when the ignition is switched on.

The speciﬁed mileage or time is the distance or time until the next service can be completed.

Service event

When an oil change service or an inspection service is due, a chime will sound when switching on the ignition and you can then see a wrench symbol

seconds in the instrument cluster display together with one of the following displays:

for a fe

Inspection now!

Oil change now!

Oil change service and inspection now!

Checking a service due date in the Infotainment system

When the ignition is on, the engine is off, and the vehicle is stationary, the current service due date can be viewed at any time:

1. Depending on the vehicle equipment, press the

button or function key and select the Vehicle menu in the Infotainment system.

button or function key.

Or: depending on the vehicle equipment, press the

2. Depending on how your vehicle is equipped, select the Settings menu.

3. Select the Service menu item to display the service information.

Checking a Service Due Date in the Volkswagen Digital Cockpit Pro

When the ignition is on, the engine is off, and the vehicle is stationary, the current service due date can be viewed at any time:

1. Open the service menu ⇒ Service menu.

Resetting the service interval display

If the service interval display was not reset after the oil change service or inspection service, the display can be reset as follows:

Vehicles with a digital instrument cluster: The service interval display can only be reset through the service menu ⇒ Service menu.

Do not reset the service interval display between service intervals or incorrect information will be displayed.

If the oil change service interval was manually reset, the service interval display then also switches to a ﬁxed service interval, even on vehicles with the ﬂexible oil

change service interval.

The service message disappears automatically after a few seconds when the engine is running or when the

is pressed.

button on the multi-function steering wheel

If the 12 V vehicle battery in a vehicle with the flexible service interval has been disconnected for an extended period, the time for the next oil change service

cannot be calculated. Therefore, the service interval displays may show incorrect calculations. If this is the case, follow the maximum permissible maintenance

intervals.

Time

Setting the time in the Infotainment system

1. Depending on the design, press the

button or function key and open the Vehicle menu.

button or function key.

Or: depending on the vehicle equipment, press the

2. Depending on how your vehicle is equipped, open the Settings menu.

3. Select the Time and date menu item to set the time.

Setting the Time in the Volkswagen Digital Cockpit Pro

1. Select the Range information proﬁle.

2. Press and hold the

button on the multi-function steering wheel until the service menu is available in the instrument cluster display ⇒ Service menu.

3. Select Time menu.

4. Set the correct time using the

arrow buttons.

Sport displays

Lap timer in the instrument cluster

The lap timer offers the option to

measure and save the individual lap

times on a race course manually in the

vehicle as well as compare these times

to the best times previously recorded.

Depending on the equipment, the lap timer can be displayed in the instrument cluster.

The following main menus can be displayed:

Lap timer.

Lap (with current lap speciﬁcation).

Statistics.

Switching between menus

1. Press the

button on the multi-function steering wheel.

For example, the following list will show the layout of the menus in the instrument cluster display. The actual scope of the menus and the names of individual menu

items depend on the instrument cluster version and the vehicle electronics.

Menu displays and functions

Lap timer menu:

Start

The time measurement of a lap is started.

Since start The time measurement begins when the vehicle begins to drive. If it is already moving, the time measurement starts when the vehicle comes to a

stop in the meantime.

Statistics An overview of the laps previously recorded is displayed.

Lap menu:

Stop

The active time measurement is paused. The lap is not finished.

Resume The paused time measurement is resumed.

Split time A split time is displayed for approximately five seconds. The active time measurement continues to run simultaneously.

Driver information -> Service for Your Volkswagen Arteon 4 Door First Generation (2017-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals