Get Coolingsystem -> 1.5 Radiator - remove and install Guide for Volkswagen Fox SUV Second Generation (2003-2021)

FOX 2004 ➤

3 - Cyl. injection engine - Edition 12.2009

1.5

Radiator - remove and install

Special tools and workshop

equipment required

♦ Refractometer for T 10007

or coolant analysis -EQ

7093-

♦ VAS 5024A or Standart-

type clamp pliers -VW

5162-

♦ Torque wrench - 5 to 50 Nm

(enc. 1/2") -VAG 1331-

1.5.1

Removal

– Put front panel in the work position: ⇒ Body - external assem‐

bly works; Rep. Gr. 50 ; Body - front part

– Drain the cooling system ⇒ page 56 .

– Loosen cooling system hoses from radiator

– Disengage the connectors from the Radiator fan thermal

switch -F18- and from the Radiator fan -V7- .

– Remove radiator securing scrrews and remove radiator with

Radiator fan -V7- from below.

Vehicles with air conditioning

Observe additional indications and installation works

1. Cooling system components - remove and install

FOX 2004 ➤

3 - Cyl. injection engine - Edition 12.2009

Note

To prevent damages to the condenser, as well as to the cooling

gas pipes, it is necessary to ensure the hoses are not stressed,

bent or deformed.

– Loosen cooling gas pipes brace(s).

– Loosen radiator condenser and fasten it to the front panel.

1.5.2

Installation

Install in reversed order, considering the following:

Fill cooling system ⇒ page 56 .

– Electrical connections and installation: ⇒ Current flow dia‐

grams, Electrical fault finding and Fitting locations.

1.6

Water pump - remove and install

Rep. Gr.19 - Cooling system

Coolingsystem -> 1.5 Radiator - remove and install for Your Volkswagen Fox SUV Second Generation (2003-2021)