Advertisement

Advertisement

Starting and driving -> Economical driving style for Your Volkswagen T Cross SUV First Generation (2018-2025)

or  
illuminates together with  
Message regarding the gearbox overheating  
— You may continue driving, exercising appropriate  
caution.  
illuminates together with  
or  
illuminates together with  
Message regarding the gearbox overheating  
— Insert a flat-head screwdriver or push a similar  
tool into the gap in the area of arrow A .  
— Stop driving! Stop the vehicle and stop the en-  
gine.  
— Carefully loosen and lift the quadrant cover.  
— Push the foam insert away until the yellow re-  
lease lever is visible.  
— After the indicator light goes out, your journey  
can continue.  
— If the warning light does not go out, stop driving!  
Seek the help of a specialist garage.  
Gearbox impaired  
illuminates together with  
or  
illuminates together with  
Message regarding the gearbox in emergency  
mode  
— Press with the vehicle key on the release lever,  
and at the same time, press the key in the selec-  
tor lever.  
— You may continue driving, exercising appropriate  
caution.  
— Immediately seek the help of a specialist garage.  
— Put the selector lever in position.  
illuminates together with  
or  
Economical driving style  
illuminates together with  
Message regarding a gearbox fault  
Tips for economical driving  
— Stop driving! Seek the help of a specialist garage.  
— Avoid unnecessary acceleration and braking.  
Starting up a vehicle that is stuck  
— Follow the gear recommendation in the display of  
the instrument cluster.  
— Adjust the selector lever between  
and . The  
vehicle will then start to rock and be easier to  
free.  
— Avoid full acceleration and too high speeds.  
— Avoid engine idling during longer periods of sta-  
tionary time.  
— Do not warm up the engine while the vehicle is  
stationary. If possible, start your journey as soon  
as the engine starts.  
Manual release of automatic gear-  
box  
— Observe the prescribed tyre pressure » page 116.  
— Remove unnecessary ballast.  
— Secure the vehicle with the parking brake.  
— Remove the roof rack when it is not needed.  
— Switch on electric consumers only for as long as  
necessary.  
90  
Starting and driving  
— Do not leave the windows open while driving.  
Installing the towing eye  
Towing eye and towing proce-  
dure  
Conditions for towing  
The technical condition of the vehicle enables  
the towing process.  
The ignition is switched on.  
— Screw in the towing eye.  
The shift lever is in the neutral position or the  
selector lever is in the position.  
— Insert the wheel wrench or similar object through  
the towing eye.  
— Tighten the towing eye.  
After the towing process  
— Unscrew the towing eye.  
— Insert the cover cap.  
Restriction  
— Towing speed max. 50 km/h  
— Towing distance max. 50 km  
Towing the vehicle  
Towing lug  
When towing, observe the country-specific legal  
regulations.  
Removing the front cap  
Towing takes practice. Both drivers should be famili-  
ar with the specific features of the towing process.  
WARNING  
When the ignition is switched off, the brake boos-  
ter and the power steering do not work. In addi-  
tion, there is a risk that the steering lock will en-  
gage.  
If it is not possible to start the engine, switch on  
the ignition!  
·
— Press on the cap and remove it.  
WARNING  
Removing the rear cap  
The tow rope must not be twisted.  
·
·
Use a braided synthetic fibre rope for towing.  
Do not use a twisted tow rope.  
— Press on the cap and remove it.  
Towing eye and towing procedure  
91