Handle on the driver door: levering off the cover.
When manual locking takes place, all doors are locked. With manual unlocking, only the driver door is unlocked.
Observe the information about the anti-theft alarm (→ Anti-theft alarm).
1. Place the key bit or spare key on the notch of the driver's door handle from below.
2. Hold your index finger under the key bit.
3. Lever off the cap with the vehicle key in the direction of the arrow → Fig. 1.
4. Insert the key bit into the lock cylinder and lock or unlock the vehicle.
5. Pull the door handle and fit the cap again.
Things to note when unlocking manually
—The alarm is triggered when the driver door is opened (→ Anti-theft alarm).
—An emergency start must be performed after unlocking (→ Starting the engine).
—Switch on the ignition to switch off the alarm.
The electronic immobiliser recognises a valid vehicle key.
The anti-theft alarm is not activated when the vehicle is locked manually using the key bit (→ Anti-theft alarm).