The multifunction display shows driving and fuel consumption data, e.g. driving time, distance travelled. The secondary display area
can show the driving data in a variety of ways .
Different driving data can be displayed depending on the vehicle equipment level. The displayed driving data depends on the current
driving behaviour, the vehicle condition, e.g. particulate filter regeneration, and the current driving situation, e.g. urban driving. The
driving data values are determined as average values over route sections of varying length. This means that the currently displayed
value may differ from the actual average value.
Since start recorder
The memory will be deleted if the journey is interrupted for more than 2 hours.
Since refuelling recorder
Display and storage of the collected driving and consumption values. The memory is deleted when the tank is refilled.
Long-term recorder
The recorder collects the driving values for up to 100 minutes driving time or 9,999.9 km (mi) distance covered. The memory is deleted
if one of these maximum values is exceeded. The maximum values vary depending on the instrument cluster version.
Resetting the driving data displays
1. Press the
2. Use the arrow buttons
An arrow after the entry in the configuration menu links to a submenu.
or
button.
and
to select the corresponding driving data display in the configuration menu.
3. Select Reset data in the submenu and confirm with the
button.
Resetting the trip recorder
1. Tap Vehicle in the Infotainment system.
2. In the Vehicle menu, tap the Status function button.
3. Tap Distance.
4. Tap the 0.0 function button to reset the value.
AdBlue range or Range
Approximate calculation of the distance in km (mi) that the vehicle can still travel with the current AdBlue® tank level under the current
driving conditions. If it is possible to increase the range by refilling, the required refill amount is also displayed.
WARNING
If the driver is distracted when driving, this can cause accidents and serious injuries. Operating the instrument cluster and
Infotainment system can distract you from the road.
● Drive with your full attention and with responsibility.
● Never operate the instrument cluster while the vehicle is in motion.
● Adjust all settings in the instrument cluster and Infotainment system only when the vehicle is stationary.