—Gearbox.
Compass display
If the Compass secondary display is activated, the current compass direction in which you are driving is shown as a blue arrow with a
representation of the vehicle in combination with a compass.
Torque distribution
The secondary display Torque distribution shows the currently present torque individually for each wheel.
Navigation information
When route guidance is active, the Navigation information secondary displays shows an arrow to indicate the direction of travel.
The submenu contains the home address and a list of recent destinations. You can start route guidance using the
button .
Telephone information
If the Telephone secondary display is activated and a mobile telephone is connected via Bluetooth®, for example, the Bluetooth symbol
is shown on the display of the digital instrument cluster Pro. In addition, the symbol shows the charge level of the mobile phone
battery.
A list of recent calls is displayed in the submenu. The list can be used to call the contacts shown.
Destination information
When route guidance is active, the Destination information secondary display shows the expected journey time and the distance to
the destination in km or miles.
Some settings can be saved in the user accounts of the personalisation function and can therefore change automatically when
the user account is changed .
Some notifications in the digital instrument cluster may be overridden by sudden events, e.g. incoming telephone calls.
Depending on the vehicle equipment level, some settings and displays may also appear in the Infotainment system.
The start of the red zone on the rev counter indicates the maximum engine speed that may be used in all positions when the engine is
warm and after it has been run in properly.
You should change up a position, set the driving mode selector to D/S position or lift your foot off the accelerator before the needle
reaches the red zone.
NOTICE
The needle on the rev counter should only briefly point into the red area, as engine damage may otherwise be incurred. Heavy loads
on the engine, particularly when the engine is cold, can cause engine damage.
● When the engine is cold, avoid high engine speeds, strong acceleration and high engine loads.
Changing up a gear early will help to save fuel and reduce engine noise.
English 