Changing the main display
You can change the focus of the main display manually.
1. Press the arrow buttons
and
on the multifunction steering wheel (→ Digital instrument cluster (Pro)).
Navigation
Navigation map and information for route guidance.
Driver assist systems
Display of active driver assist systems.
Driving data
Display of current driving time, current distance covered, average speed and average and current consumption.
A display with information on the vehicle status, e.g. total mileage, is shown before starting and after switching off the engine.
Selecting secondary displays
1. Select the right or left secondary display area with the
2. Select the desired secondary display with the arrow buttons
3. Confirm the selection with the button.
or
button.
and
.
Showing or hiding secondary displays
1. Press and hold the
button.
Configuring secondary displays
You can configure the secondary displays according to your preferences in order to select which secondary displays are available in the
secondary display area:
1. Select the right or left secondary display area with the
2. Use the arrow buttons and to navigate to the Settings menu and open this menu.
3. Press the button to make the changes.
A tick indicates that the corresponding secondary display is activated.
4. To return to menu selection, press the or button.
or
button.
The secondary displays can be configured or hidden independently of each other.
Navigation map on the digital instrument cluster Pro
Depending on the vehicle equipment, the digital instrument cluster Pro is able to display a detailed navigation map.
The size of the navigation map can be adjusted continuously. To select the preferred map size:
1. To open the Navigation display area, press the arrow buttons
2. To zoom in and out, press the button and use the arrow buttons
3. Press and hold the button on the multifunction steering wheel to show and hide the secondary displays.
and
on the multifunction steering wheel.
or to adjust the desired map size.
English 