Get Cooling -> 1.3 Removing and installing fan support with fan Guide for Volkswagen Touareg SUV First Generation (2002-2010)

Touareg 2003 ➤

8-cylinder injection engine - Edition 11.2011

1.2

Assembly overview - radiator fan

1 - Radiator fan -V7-

2 - Fan support

❑ Clipped onto radiator.

❑ Check for secure seat‐

ing.

3 - 10 Nm

4 - 10 Nm

5 - Radiator fan 2 -V177-

6 - Radiator fan control unit -

J293-

7 - 10 Nm

1.3

Removing and installing fan support

with fan

Special tools and workshop equipment required

♦ Spring-type clip pliers -VAS 5024A-

Removing

WARNING

Steam may escape when expansion tank is opened. Wear eye

protection and protective clothing to avoid eye injuries and

scalding. Cover cap with cloth and open carefully.

– Open and close cap on coolant expansion tank.

– Release coolant hose retaining clips from front end using a

screwdriver.

1. Removing and installing parts of cooling system

Touareg 2003 ➤

8-cylinder injection engine - Edition 11.2011

– Unscrew coolant pipe from fan support -arrow-.

– Loosen spring-type clips on coolant pipe and swivel it upwards

together with spacers.

– Disconnect connectors from radiator, loosen cable clamps on

fan support and lay wiring harness to side.

– Pull retaining ring -1- of rubber mounting on left and right in

direction of arrow off brake vacuum pump -V192- and lay

pump to side.

– Then release locking mechanisms on left and right of radiator

using a screwdriver -arrows- and lift out complete fan support

upwards.

Rep. gr.19 - Cooling

Cooling -> 1.3 Removing and installing fan support with fan for Your Volkswagen Touareg SUV First Generation (2002-2010)