Deactivating Keyless Access temporarily
You can temporarily deactivate Keyless Access using the following steps to prevent the vehicle from being unlocked
and started by unauthorized people:
1. Lock the vehicle with the button on the vehicle key.
2. Then, within five seconds of locking the vehicle, touch the sensor on the outside of the door handle
B
once → fig. 2
. Do not grasp the door handle during this process.
Keyless Access is now temporarily deactivated.
3. To check that it has actually been deactivated, wait at least 10 seconds and then pull on the door handle.
The door should not open.
The next time the vehicle is unlocked, you must use the vehicle key. Keyless Access will be reactivated the next time
the vehicle is unlocked.
Operating convenience functions
The electric windows close automatically.
On vehicles with a tilting and sliding panoramic sunroof, the sunroof also closes.
B
1. Press and hold the sensor on the driver or passenger door handle for a few seconds→ fig. 2
The sensor functions can be adjusted in theVehicle settings menu in the Infotainment system.
.
The unlock function is deactivated for several seconds so that you can check if the vehicle locked
correctly.
Vehicles featuring a
DSG®
®
automated transmission can only be locked when the parking lock is engaged.
If the sensor is touched twice, the entire vehicle will unlock even after a single door is
unlocked.
Troubleshooting
If Keyless Access is not working
The sensor function may be impaired if the sensor is dirty.
1. Clean the sensors.
If all turn signals flash four times
The vehicle key that was last used is still in the vehicle.
1. Remove the vehicle key and lock the vehicle.
Automatic sensor deactivation
The sensors will deactivate automatically under the following conditions:
113
English 