Advertisement

Advertisement

Opening and closing -> Windows for Your Volkswagen Touran 4 Door Third Generation (2022-2025)

1. Guide the trunk lid farther upward by hand.  
The Easy Open sensor function is not working  
Easy Open only works when the ignition is switched off.  
Clean the sensors in the rear bumper.  
The trailer hitch is extended.  
The vehicle was retrofitted with a trailer hitch.  
Easy Open may be deactivated in heavy precipitation to reduce the risk of false activation.  
Opening and closing the windows  
Fig. 1 In the driver door: Power window buttons.  
1
2
Opening the window: press the switch.  
Closing the window: pull the switch.  
Deactivating the power window buttons in the rear doors: press the switch.  
This button is only located in the driver door.  
The windows can still be opened or closed using the switches in the doors for a brief period after the ignition has  
been switched off, as long as the driver’s or front passenger door is not opened.  
One-touch opening and closing function  
The one-touch opening and closing function allows the windows to be completely opened or closed. To use this  
feature, do not hold the window switch up or down.  
To start the one-touch closing function, pull the window switch upward briefly to the second level.  
To start the one-touch opening function, press the window switch downward briefly to the second level.  
To stop the one-touch opening or closing function, pull or press the switch for that window again.  
Convenience opening and closing  
The windows can be opened and closed from outside the vehicle using the vehicle key when the ignition is switched  
off.  
Depending on the country, it may only be possible to open the windows from outside using the vehicle key.  
1. Press and hold the unlock or lock button on the vehicle key.  
Or: On vehicles with Keyless Access with push-button start:hold your finger on the unlock sensor in the door  
133  
handle for several seconds until the windows are closed . The vehicle key must be nearby to use this feature.  
When all of the windows are closed, the turn signals will flash once as a confirmation.  
If the vehicle has a tilting and sliding panoramic sunroof, depending on the vehicle equipment, this must also be  
closed.  
2. To stop the function, release the unlock or lock button.  
Or to stop the function, remove your finger from the sensor.  
You can select the convenience opening settings in theVehicle settings menu in the Infotainment system.  
WARNING  
Careless or unintended use of the power windows can cause serious injuries.  
Do not open or close the power windows if anyone is in the way.  
Always take all vehicle keys with you when leaving the vehicle.  
Note that the windows can still be opened or closed using the door buttons for a brief period after the ignition has  
been switched off, as long as the driver's or front passenger door is not opened.  
When driving with children seated on the rear bench seat, always disable the rear power windows so that the  
windows cannot be opened or closed.  
WARNING  
If the vehicle is locked, the windows can no longer be opened and will prevent people from escaping from the  
vehicle interior. In an emergency, this could cause serious or fatal injuries.  
Never leave children or people requiring assistance unattended in the vehicle when the vehicle is locked.  
NOTICE  
If the windows are open, precipitation can enter the vehicle and soak the interior equipment, which could restrict  
the function of the controls or damage them.  
Close all windows if there is precipitation.  
If the power windows are malfunctioning, the one-touch opening and closing function and the pinch  
protection may not function correctly. Contact a suitably qualified professional. Volkswagen recommends  
contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Convenience opening and closing only functions if the one-touch opening and closing function is activated  
for all the power windows.  
Some settings can be saved in the driver personalization user profiles and therefore change automatically  
when the user profile is switched.  
Power window pinch protection  
The power window pinch protection can reduce the risk of being pinched and injured when the windows are closing.  
If the window cannot close due to resistance or an obstacle, then the window will reopen immediately→  
.
1. Check why the window did not close.  
2. Try again to close the window.  
If the window will not close again, then the pinch protection will be disabled for several seconds.  
If the window still cannot close, then the window will stop at the place where it meets resistance. If you pull on the  
power window switch again within a few seconds, the window will close without pinch protection →  
.
134  
Closing windows without pinch protection  
1. Try to close the window again within a few seconds by holding the power window switch. This will disable the  
pinch protection.  
If the closing process takes longer than several seconds, then pinch protection will be enabled again. If there is  
resistance to the window moving or an obstacle is blocking the window, then the window will reopen  
automatically.  
2. If the window still cannot close, then contact a suitably qualified professional. Volkswagen recommends  
contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
WARNING  
Closing the window when pinch protection is disabled can result in serious injuries.  
Always be careful when closing the windows.  
Do not close windows if anyone is in the way.  
Note that the pinch protection does not prevent fingers or body parts from being trapped against the window  
frame.  
Pinch protection is also active during convenience  
closing.  
Troubleshooting  
One-touch up/down feature  
If the 12 V vehicle battery is disconnected or drained when the windows are not completely closed, then the one-  
touch up/down feature will not work. It must be reprogrammed using the following steps:  
1. Switch the ignition on.  
2. Close all windows and doors.  
3. Pull the switch for the desired window and hold it in that position for several seconds.  
4. Release the switch, then pull it upward again and hold it.  
The one-touch up and down features will then be fully functional.  
The automatic power windows can be reprogrammed individually, or multiple windows can be reprogrammed at the  
same time.  
Controls are responding differently than expected  
Moisture, dirt and grease may limit the functioning of the controls.  
1. Always keep the control panels clean and dry.  
135