Advertisement

Advertisement

Transporting -> Fastening and securing for Your Volkswagen Touran 4 Door Third Generation (2022-2025)

B
the fastening straps → fig. 1  
.
2. Check the tension of the screen separator again if the position of the backrests in front of the screen separator  
has been adjusted.  
Removing the net partition  
1. Remove the luggage compartment cover if necessary.  
2. Loosen the net partition fastening straps.  
3. Unhook the net partition retaining hooks from the tie-downs→ fig. 1  
B
.
4. Unhook the net partition from a mount in the roof by pressing together the crossbar.  
5. Unhook the net partition from the other mount in the roof.  
6. Fold the screen separator .  
7. Install the luggage compartment cover if necessary.  
WARNING  
In the case of sudden braking maneuvers or an accident, objects could being thrown through the vehicle interior,  
causing serious or fatal injuries.  
Check that the screen separator is undamaged.  
Never use a damaged screen separator.  
Move all backrests in front of the screen separator into the upright and engaged position.  
Check that the crossbars are engaged correctly.  
Check regularly that the screen separator is well tensioned.  
Secure all objects in the luggage compartment even if a luggage screen separator is fitted.  
Make sure that no persons are behind the installed screen separator when the vehicle is moving.  
NOTICE  
Securing the net partition to unintended points can cause damage.  
Always secure the screen separator only at the points designed for it.  
Tie-downs  
Fig. 1 In the luggage compartment: Foldable tie-down  
(general example).  
439  
Tie-downs are located in the luggage compartment to secure loose objects and luggage with the help of lines,  
fixation belts or securing straps → fig. 1.  
WARNING  
Unsuitable or damaged tie-down straps or tensioning straps could break during braking maneuvers or an accident.  
This could result in objects being thrown through the vehicle interior and causing serious or fatal injuries.  
Use only suitable and undamaged tie-downs, fixing and tensioning straps.  
Secure cords, fixation belts and tensioning straps diagonally and tightly across the items placed on the luggage  
compartment floor, and fasten the cords, fixation belts and tensioning straps securely to the tie-downs.  
Make sure that the upper edge of the load is above the tie-downs, especially on flat objects.  
Follow the signs about storing cargo in the luggage compartment, depending on the vehicle equipment.  
Never secure a child restraint to the tie-downs.  
WARNING  
Elastic tensioning straps must be stretched for securing to the tie-downs and are therefore under tension. If elastic  
tensioning straps slip off and “spring back” toward your body, the hooks attached to them may cause serious  
injuries.  
Protect your eyes and face when securing and releasing the straps.  
Always secure elastic tensioning straps to the tie-downs in the front part of the luggage compartment first. Then  
pull them to the loading edge. Secure the elastic tensioning straps to the tie-downs so that they will “spring  
away” from your body if they come off.  
Suitable straps and cargo securing systems are available from an authorized Volkswagen dealer or authorized  
Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility.  
Luggage securing corner  
Fig. 1 In the left of the luggage compartment: luggage  
securing corner.  
1
Stowed luggage securing corner.  
440  
Fig. 2 In the luggage compartment: fixing items in position  
using the luggage securing corner.  
1
Installed luggage securing corner.  
Depending on the vehicle equipment, the left storage compartment may contain a luggage securing corner. The  
luggage securing corner can be used to hold down light items, such as a transport box, on the luggage compartment  
floor behind the rear seats and the left or right side panel.  
How to use the luggage securing corner  
1
A
1. Press the luggage securing corner → fig. 1  
2. Remove the luggage securing corner→ fig. 1  
3. Bend the luggage securing corner to form a right angle.  
to the side in the direction of the arrow  
.
1
B
by lifting it up and out in the direction of the arrow  
.
4. Using the Velcro® fastener, secure the luggage securing corner to the luggage compartment floor to fix the  
1
carried item in position → fig. 2  
.
Stowing the luggage securing corner  
1. Remove the luggage securing corner from the luggage compartment floor.  
2. Bend the luggage securing corner so that it is straight.  
1
B
3. Insert the luggage securing corner → fig. 1  
4. Press the luggage securing corner → fig. 1  
into the holder in the opposite direction to the arrow  
.
1
A
in the opposite direction to the arrow  
.
You can also stow the luggage securing corner in the appropriate compartment under the luggage compartment  
floor.  
NOTICE  
In the event of incorrect use, objects can come loose from the luggage securing corner in the event of a braking  
maneuver or an accident, they can be thrown through the vehicle interior and be damaged.  
Use the luggage securing corner to secure only light items from sliding around behind the rear seats.  
Do not use the luggage securing corner for restraining cargo.  
441