1. Press the release button and, with the release button held down, fold in the crossbar in the direction of the
1
arrow → fig. 2
.
2
2. Repeat the process with the other release button→ fig. 2
3. Roll up the net partition and stow it in the storage bag.
4. Stow the bag securely in the vehicle.
.
Installing and removing a net partition
A fitted screen separator can help prevent objects from being thrown out of the luggage compartment into the
passenger compartment during a braking maneuver, for example.
Installing the net partition
Fig. 1 In the luggage compartment: Install the net partition
behind the rear bench seat.
A
B
Holders in roof.
Tie-downs for attaching the hooks.
The screen separator can be installed behind the rear bench seat or, depending on the equipment, behind the front
seats if the second row of seats is folded forward.
1. Remove the luggage compartment cover if necessary.
2. Fold out the screen separator .
3. When fitting the net partition behind the front seats, fold the backrests of the second row of seats forward.
4. Bring the backrests in front of the screen separator into the upright position and engage them as close as
possible to the screen separator.
A
5. Attach the screen separator to one of the two holders in the roof→ fig. 1
Make sure that the crossbar is pulled down over the top position.
A
6. Attach the net partition to the opposite mount in the roof by pressing together the crossbar→ fig. 1
.
Tensioning the Screen Separator
1. Attach both retaining hooks of the screen separator to the tie-downs in the luggage compartment and tighten
438
English 