plastic screw from the hole opening.
The front holes or markings are located on the undersides of the roof pillars near the door seal.
The rear holes or markings are located on the undersides of the roof pillars near the door seal or, depending on the
vehicle equipment, at the top of the rear side windows.
The respective base can be attached after successfully installing the base supports→
.
Mounting the Roof Rack Bars on the Roof Rail
Mount the roof rack bars in accordance with the supplied installation instructions.
The respective base can be attached after successfully installing the roof rack bars→
.
Remove the roof rack in the following scenarios
—If the roof rack is no longer needed.
—Before driving through an automatic car wash
—If the height of the vehicle exceeds the maximum height limit, for example in a garage
NOTICE
The height of the vehicle changes when a roof rack is installed and when there is cargo secured on it. The vehicle
may be badly damaged if you drive into entrances with low heights, e.g. underpasses and garages.
● Compare the height of the vehicle with the clearance height.
NOTICE
If parts on the roof of your particular vehicle(depending on the vehicle equipment), e.g. the roof antenna, and the
trunk lid's range of movement are impaired by the roof rack and the luggage, the vehicle may be damaged.
● Ensure that the roof rack is positioned correctly on the roof and that it will not affect any components of the
vehicle.
WARNING
Securing the roof rack and base incorrectly or using them incorrectly may cause the luggage or the entire assembly
to come loose from the vehicle roof. This can result in accidents and serious or fatal injuries.
● Always mount the roof rack and base correctly in accordance with the manufacturer's instructions.
● Secure the roof rack only at the locations intended for this.
● Always mount special rack assemblies for bicycles, skis, surfboards, etc. correctly and in accordance with the
manufacturer's installation instructions.
● Only use the roof rack and base if they are undamaged and secured correctly.
● Check the roof rack mounts before starting a journey and, if necessary, retighten them after a short distance.
● On long trips, check the threaded connections and fasteners each time you take a break.
● Do not make any modifications or repairs to the roof rack or base.
A fitted roof rack increases air resistance and therefore may reduce the vehicle's
range.
Loading the roof rack
Maximum permissible roof weight
The maximum permissible roof load is 75 kg(165 lbs).
The roof load consists of the weight of the roof rack and the items carried on the roof rack→
.
463