Get Transporting -> Rail system Guide for Volkswagen Touran 4 Door Third Generation (2022-2025)

Rail system with fixtures

Fig. 1 In the luggage compartment: Rail system with rails,

sliding fixing elements and a securing strap.

1

2

Fixing element.

Securing strap.

Components of the Rail System with Fixing Elements

—Multiple rails.

1

—Sliding fixing elements → fig. 1

.

2

—Securing straps which can be fixed to the rails→ fig. 1

—Net cover with holders.

.

The rail system with fixing elements is designed for securing light loads. No fixing elements may ever be in the rails in

the seating area if people are being transported in the third row of seats →

.

Installing fixing elements

1

1. With the grooves facing upward → fig. 1

, slot the fixing element into the rails from above and press down.

2. Slide the fixing element into the desired position.

3. Take care that the fixing element locks into the rail system→

.

Removing the fixing element

1. Pull the fixing element downward out of the rails and remove from above.

Securing items

1. Pull the securing strap through the fixing element and safely secure the cargo→

.

WARNING

442

Fixing elements in the rail system near the seats in the third row of seats can cause serious or fatal injuries in the

event of an accident or sudden braking maneuver.

● Always remove fixing elements from the seat rails or push the fixing elements right to the back of the seat rails, if

people are being transported in the third row of seats.

WARNING

Sliding fixing elements which are not securely engaged can detach from the rails if there is a braking maneuver or

accident. This could result in objects being thrown through the vehicle interior and cause serious or fatal injuries.

● Before driving, check that the movable fixing elements are securely engaged in the rails.

WARNING

Unsuitable or damaged securing straps could break during braking maneuvers or an accident. This could result in

objects being thrown through the vehicle interior and causing serious or fatal injuries.

● Always use the securing straps which came with the rail system with fixing elements.

● Safely secure the securing straps to the fixing elements.

● Secure even small and light objects.

● Never secure a child restraint to the fixing elements.

WARNING

Loose objects in the luggage compartment can slide around suddenly and alter the vehicle handling. This can result

in a loss of vehicle control and lead to serious or fatal injuries.

● Correctly secure the load to prevent it from sliding.

NOTICE

Securing elements that are secured on the rail system can be damaged when the third row seats are folded forward

or back, and can cause damage to the rear seats.

● Remove the fixing elements from the rail system before folding the third row of seats forward or back.

Cover

When there are passengers traveling in the third row of seats, there must never be cover mounts in the rail system in

vicinity of the seats →

.

Installing cover mounts

1. Insert the cover mount into the rail from above and press down.

2. Move the cover mount to the desired position.

3. Ensure that the cover mount engages in the rail system→

.

Attach the cover to the cover mount

443

Fig. 1 In the luggage compartment: attaching the cover.

1

2

Insert the support rod.

Rotate the support rod.

1

1. Place the support rod in the cover mount from above and rotate→ fig. 1

2

by 90 degrees in the direction of

the arrow

.

The red marking on the support rod must no longer be visible→

.

Using the cover as a bag

1. Install two cover mounts each in the rails.

2. Attach the cover to the four cover mounts.

3. Push the cover mounts in the rails as close together as possible.

4. Press the outer ends of the cover against each other so that they are held together by the hook and loop

fastener.

Unhooking the cover

Fig. 2 In the luggage compartment: unhooking the cover.

444

1

2

Rotate the support rod.

Remove the support rod.

1

1. Rotate the support rod by 90 degrees in the direction of the arrow→ fig. 2

support rod becomes visible.

until the red marking on the

2

2. Pull the support rod up and out→ fig. 2

.

3. Stow the removed cover securely in the front storage compartment in the trunk floor.

Removing the cover mounts

1. Detach the bottom cover mount from the rail and pull it up and off.

WARNING

Cover mounts in the rail system near the seats in the third row of seats can cause serious or fatal injuries in the

event of an accident or sudden braking maneuver.

● Always remove cover mounts from the seat rails or push them all the way to the back in the seat rails, if people

are traveling on the seats of the third row of seats.

WARNING

Cover mounts that are not securely engaged and locked into place could detach from the rail during a braking

maneuver or accident. This could result in objects being thrown through the vehicle interior and causing serious or

fatal injuries.

● Before driving, check that the cover mounts are securely engaged in the rails. The red marking must not be

visible.

● Never secure a child restraint to the cover mounts.

NOTICE

Cover mounts that are secured on the rail system can be damaged when the third row seats are folded forward or

back, which can cause damage to the rear seats.

● Remove the cover mounts from the rail system before folding the third row of seats forward or back.

Storing the cover net

Fig. 1 Under the luggage compartment floor: storing the

cover net.

445

1

Cover net.

Depending on vehicle equipment, it may be possible to store the removed luggage compartment cover net and

removed luggage compartment cover under the luggage compartment floor.

If both items of equipment are stored at the same time, stow the cover net first, followed by the luggage

compartment cover.

1. Unhooking the cover net.

2. Prop up the luggage compartment floor.

3. Pull the side panels of the side storage compartments out upwards and stow them in the luggage

compartment.

4. Pull the luggage corner fixing out upwards and stow securely in the relevant retainers under the luggage

compartment floor.

1

5. Place the removed cover net on the rear recesses of the side supports→ fig. 1

6. Fold back the luggage compartment floor.

.

446

Transporting -> Rail system for Your Volkswagen Touran 4 Door Third Generation (2022-2025)

Related Topics

Transporting

Popular Owner Manuals

Latest Owner Manuals