Starting control
1. Press the
button while driving forwards.
The ACC stores the current speed and maintains the selected distance. If the current speed is outside the
defined speed range, ACC will set the minimum speed (when driving more slowly than the limit) or maximum
speed (when driving faster than the limit).
The traction control system (TCS
) is also activated.
Depending on the driving situation, the following indicator lamps light up:
ACC control active, no vehicle detected ahead.
ACC control active, vehicle in front detected.
When ACC is not regulating, the indicator lamps light up grey.
Cancelling control
1. Briefly press the
button.
Or: Depress the brake pedal.
The indicator lamp corresponding to the driving situation lights up, and the speed and distance remain stored.
Control is automatically cancelled if the traction control system T( CS
) is deactivated.
Restarting control
1. Press the
button.
The ACC adopts the last stored speed and gap. The instrument cluster display shows the set speed and the
indicator lamp corresponding to the driving situation lights up.
Switching off
1. Press and hold the button.
The set speed will be deleted.
Changing to the speed limiter
1. Press the
button.
2. Select the speed limiter on the instrument cluster display.
Adaptive Cruise Control is switched off.
Depending on equipment, the button is either on the multifunction steering wheel or on the turn signal
lever.
Adjusting ACC
238
English 