Park Assist is active and the parking manoeuvre is automatically cancelled
Park Assist automatically cancels a parking procedure if one of the following criteria is met:
—The function button is pressed.
—The driver intervenes using the steering wheel.
—The driver door is opened.
—The time limit or number of manoeuvres for parking are exceeded.
—The TCS is switched off or is taking corrective action.
—There is a fault in the system.
Start the parking procedure again (→ Driving into a parking space).
Park Assist is active and supports steering movements when the vehicle is stationary
If Park Assist attempts to turn the steering wheel when the vehicle is stationary, the white symbol appears on the
instrument cluster display.
1. Depress the brake pedal.
Park Assist parks inaccurately after a wheel change
If Park Assist does not park properly after a wheel change(e.g. vehicle is too far away or too close to the curb,) it may
be necessary for the system to adopt the new wheel circumferences.
1. Drive a longer distance with the vehicle, including curves.
Park assist automatically learns the new wheel circumferences.
Introduction
The Park Distance Control assists the driver when manoeuvring and parking.
Fig. 1 In the Infotainment system: obstacle detection and
steering wheel angle for Park Distance Control
(illustration).
How the system works
Park Distance Control detects the distance from an obstacle by means of sensors in the front and rear areas of the
vehicle .
Park Distance Control warns about an obstacle by means of colour segments on the Infotainment system screen and
acoustic signals → Fig. 1. The closer the vehicle drives towards an obstacle, the closer the segment will move
towards the vehicle as shown on the display → Introduction.
280
English 