Driving into a parking space
1. Before driving past the selected parking space, press the touch panel for parking functions (→ Driver side).
Then tap the
function button in the Infotainment system if necessary.
2. Tap the
function button in the Infotainment system to select the parking mode.
2
3. Position the vehicle in front of the parking space→ Fig. 1
.
4. Steer so that the yellow lines lead into the parking space. The green and yellow lines must be aligned with the
3
side limit lines → Fig. 2
.
4
5. Stop when the red line reaches the rear boundary→ Fig. 3
.
The system displays the orientation lines irrespective of the area surrounding the vehicle. There is no
automatic obstacle detection. Drivers must judge for themselves whether the vehicle will fit into the parking
space.
Parking mode: Trailer support
Fig. 4 Infotainment system screen display: Trailer support.
In vehicles with a factory-fitted towing bracket, the trailer support function can be used when approaching a trailer
drawbar.
1. Tap the
function button to select the parking mode.
The rear view camera system shows the vehicle’s towing bracket in the lower part of the image. Coloured guiding
lines help with the manoeuvring process → Fig. 4:
Green lines: Distance to towing bracket.
Yellow line: Pre-calculated direction of the towing bracket depending on the angle of the steering wheel.
Introduction
Park Assist shows parking spaces that are suitable for parking and assists the driver when driving into and out of
parking spaces.
Park Assist is an extension of Park Distance Control.
Park Assist steers the vehicle automatically. The driver must control the accelerator, gear changes and brake
286
English 