1. Go to a suitably qualified workshop.
2. Check the rear seat and replace the battery if necessary.
Fastening and unfastening seat belts
Fastening the seat belts
Fig. 1 Inserting the seat belt latch plate into the buckle.
Fasten seat belts before every trip.
1. Always adjust the front seat and head restraint correctly .
2. Engage the rear seat backrest in the upright position.
3. Take hold of the belt and pull it evenly across your chest and pelvis. Donot twist the belt when doing this.
4. Insert the latch plate securely into the buckle belonging to the occupied seat→ Fig. 1.
5. Pull on the seat belt to ensure that the latch plate is securely locked in the buckle.
Unfastening the seat belts
Fig. 2 Removing the latch plate from the buckle
Unfasten seat belts only when the vehicle is stationary.
1. Press the red button on the belt buckle→ Fig. 2. The latch plate is released and springs out.
2. Guide the belt back by hand so that it rolls up easily, without twisting the seat belt and without damaging the
trim.
Twisted seat belt
If it is difficult to remove the seat belt from the belt guide, the seat belt may have become twisted if it was returned
53
English 