—Tian Elite
—Monza Nova IS
—Young Sport Hero
Securing child seats with the top tether
Fig. 1 Diagram: label showing the top tether attachment
point.
ISOFIX child seats with “universal” approval must be secured with an upper strap(top tether) in addition to the ISOFIX
anchor points.
Fasten the top tether only to the intended attachment points that are suitable for the top tether. These are marked
with a symbol and, in some cases, the “TOP TETHER” label → Fig. 1.
Fig. 2 Rear seats: top tether fitted.
1. Observe the instructions (→ Child seats).
2. If necessary, remove the head restraint located behind the child seat and stow it securely in the vehicle.
3. Push the attachment arms on the child seat into the ISOFIX anchor points as shown by the arrows (→ Child seat
with ISOFIX). The child seat must click and audibly securely into place.
4. If necessary, push the seat forward (→ Single seat).
5. Guide the top tether strap on the child seat behind the seat and hook it into the top tether attachment point
→ Fig. 2.
6. Tighten the tether so that the top of the child seat rests against the rear seat backrest.
WARNING
Secure the strap only to the top tether anchor rings. Failure to do so could lead to severe injuries.
● Each anchor ring can hold onlyone child seat restraining strap.
82
English 