4. Insert a new wiper blade with thesame length and designonto the wiper arm. Push it on until it engages.
5. Place the wiper arms carefully back onto the windscreen.
Changing the wiper blade for the rear window
Fig. 2 At the rear of the vehicle: Changing the rear window
wiper blade.
1
Release button.
1. When lifting a wiper arm, hold itonly in the area of the wiper blade mounting.
2. Lift and fold back the wiper arm.
3. Press and hold the release button→ Fig. 2
1
.
A
B
4. Tilt the wiper blade in the direction of the wiper arm→ Fig. 2
at the same time. You may need to use some force to do this.
and pull it off in the direction of the arrow
5. Insert a new wiper blade with thesame length and designonto the wiper arm in the opposite direction of the
B
A
arrow. Push it on until it engages → Fig. 2
. The wiper blade must be in folded-down position to do this
.
6. Carefully place the wiper arm back onto the rear window.
WARNING
Worn or dirty wiper blades reduce visibility and increase the risk of accidents and severe injuries.
● Always change windscreen wiper blades if they are damaged or worn and no longer clean the windscreen
properly.
NOTICE
Damaged or dirty windscreen wipers can scratch the windscreen.
● Do not use any detergents containing solvents, hard sponges or other sharp objects, as they can damage the
graphite coating of the wiper blades during cleaning.
● Do not use nail varnish remover, paint thinner or similar products to clean the windows.
Exterior lighting in LED technology
The exterior lighting may be designed in LED technology. Owners cannot replace the LEDs themselves. If some LEDs
fail, this may be an indication that more elements are on the point of failure. In this case, have the light units checked
and renewed if necessary at a correspondingly qualified workshop.
It may be illegal to drive with defective lights of the exterior lighting.
471
English 