Advertisement

Advertisement

Steering and Seats -> Introduction (Rear seats) for Your Volkswagen Transporter Van Seventh Generation (2021-2025)

requiring assistance alone in the vehicle.  
In the event of an emergency, stop electrical adjustment by pressing another switch.  
NOTICE  
In order to avoid damage to the electrical components in the front seats, never kneel on the front seats or the seat  
cushion. Do not apply point loads to the backrest in any way.  
It may not be possible to adjust the seat electrically if the charge level of the 12-volt vehicle battery is too  
low.  
Starting the engine will interrupt the seat adjustment  
procedure.  
Introduction  
The following section describes the options for adjusting the rear seats. Always ensure that your sitting position is  
correct .  
DANGER  
Some components of the seats in the passenger compartment contain button cells and are accessible when the rear  
seats are folded forward or removed. Swallowing a button cell can result in serious or even fatal injuries within a  
very short time.  
Always keep children away from rear seats when they are folded forward or removed.  
Seek immediate medical attention if you believe someone may have swallowed a button cell.  
WARNING  
Incorrect use or removal and fitting of the rear seats can cause accidents and severe injuries.  
Keep hands, fingers, feet and other body parts away from seat’s moving parts and adjustment range.  
Never carry out adjustments, removal or fitting while driving, otherwise the rear seats may adjust unexpectedly.  
Furthermore, an incorrect seating position is adopted while adjusting the seat.  
Only adjust the settings when there is nobody in the adjustment area of the rear seats.  
All rear seats must always be fitted in their retainers and must be securely engaged.  
All backrests must be in an upright position and securely locked in place while the vehicle is in motion so that the  
protective action of the seat belts for the rear seats is guaranteed. If a seat is occupied and the backrest has not  
clicked securely into place, the seat occupant and backrest may move forwards in the event of a sudden braking  
or driving manoeuvre or during accidents.  
Ensure that the seat belt is not trapped or damaged when folding back the backrest.  
While fitting and removing the rear seats, make sure that the seat feet are not soiled or damaged.  
The floor mats or other objects could get caught in the hinges on the backrest or the rear seat. This can prevent  
the backrest or the rear seat from locking securely when it is returned to the upright position.  
Adults and children must not use those seats when the backrest or the rear seat is folded forward or is not  
engaged securely.  
WARNING  
Cigarette lighters in the vehicle could be damaged or accidentally lit. This could lead to serious burns and other  
injuries.  
Before adjusting the seats, always make sure that there is no cigarette lighter on or near the movable parts of the  
seat.  
NOTICE  
Sharp edges can damage the seats.  
Do not touch the seats with sharp-edged objects. Sharp objects such as zips, studs on clothing, and belts, may  
damage surfaces. Open Velcro fasteners can also cause damage.  
132  
If seats are subsequently replaced or retrofitted, the seatbelt status indicator must be activated by a qualified  
workshop .  
Adjusting the rear seats  
The following section contains a description of all rear seat controls. Depending on the design of the seat, the  
controls are mirrored.  
Convenient entry function  
Fig. 1 On the rear seats: Lever for convenient entry  
function.  
Fig. 2 In passenger compartment: Convenient entry  
position.  
The convenient entry function enables convenient entry and exit in the passenger compartment.  
Setting the convenient entry position:  
1
1. Pull lever→ Fig. 1  
up.  
Backrest folds forward.  
The seat folds up and the seat becomes free in the seat rail→  
2. Slide the seat forward to facilitate access to the rear seats.  
.
133