document_0900452a81793dcc.book Seite 68 Mittwoch, 21. März 2007 5:42 17
68
Lights and vision
Applies to vehicles: with digital compass
Digital compass
Setting the correct compass calibration zone
Applies to vehicles: with digital compass
The correct compass calibration zone must first be set
before the compass can give an accurate reading.
Activating and deactivating the compass
The compass direction will appear in the mirror.
Fig. 69 Interior mirror:
activated digital
compass
– To switch the compass on and off, press and hold
A
button A until the compass display in the mirror
⇒ fig. 69 appears or disappears.
The digital compass only works when the ignition is on. The points
of the compass are displayed as follows: N (North), NE (North East),
E (East), SE (South East), S (South), SW (South West), W (West), NW
(North West).
Fig. 70 Map of compass calibration zones
A
– Press and hold button A ⇒ fig. 69 until the currently set
zone number is displayed on the interior mirror.
A
– Press button Arepeatedly until the correct zone number
Note
appears. The adjustment mode will be ended automati-
cally after a few seconds.
To avoid inaccurate compass readings, do not hold any remote
controls or other electrical devices or metal objects near the interior
mirror.
English 
