document_0900452a81793dcc.book Seite 71 Mittwoch, 21. März 2007 5:42 17
Seats and storage
71
Applies to vehicles: with electric seat adjustment
Adjusting backrest angle
Easy-entry function
C
– Press switch A forwards or backwards.
The easy-entry function gives improved access to the rear
seats.
Adjusting head restraint height
C
– Press switch A up or down.
Extending or shortening the thigh support*
D
– Lift the control A below the seat cushion. The front seat
cushion will spring forward.
– Slide the seat cushion back to the normal position after
each use.
Fig. 72 Driver's seat:
easy-entry controls
WARNING
• Never adjust the driver's seat when the vehicle is moving - this
Tipping the front backrests forward
could lead to an accident.
– Pull up the lever ⇒ fig. 72.
• The electrical seat adjustment also works when the ignition is
off and when the key is not in the ignition. To avoid accidental inju-
ries, never leave children unattended in the vehicle.
– Tip the backrest forward and down.
• Be careful when adjusting the seat height. Careless or uncon-
Moving the front seats forward
trolled use of the height adjustment can cause injuries.
A
– Press and hold the switch A until the seat reaches the
• Do not drive with the backrests of the front seats reclined too
far as otherwise the seat belt and airbag could fail to restrain the
wearer properly in an accident, possibly leading to injury.
desired position.
Moving the front seats back
B
– Press and hold the switch A until the seat reaches the
desired position. The seat will stop automatically when it
has moved back to its original position.
The front backrests can be tipped forward for easier access to the
rear seats (the head restraints will be retracted automatically). At
the same time, the front seats can also be moved forwards and
backwards as required.
Controls
Safety
Driving tips
General maintenance
Self-help
Technical data
English 
