document_0900452a81793dcc.book Seite 72 Mittwoch, 21. März 2007 5:42 17
72
Seats and storage
When the front seats are moved forward, their original positions are
stored in a memory. The seats then stop automatically in this posi-
tion when they are moved back. If you want to move one of the seats
Storing and recalling settings
You can store and recall the settings for two different drivers using
the recall buttons 1 and 2 ⇒ fig. 73 ⇒ page 72.
B
back further, release the switch A and press it again.
In addition, the current settings are automatically stored when you
lock the vehicle and assigned to the remote control key that is being
used. When you unlock the vehicle, the system automatically recalls
the settings stored on that remote control key.
The head restraints on the front seats retract automatically
(depending on the seat height setting) when the backrests are
tipped forward, and move back to their original positions when the
backrests are returned to the upright position.
Switching seat memory on and off
ON/OFF
The seat memory will be out of action if the
raised position (press and release). The word OFF will then light up
ON/OFF
switch is in the
Note
The easy-entry switches on the relevant seat are out of action when
the driver's or passenger's doors are closed.
in the
The stored settings will all remain in the memory. We recommend
ON/OFF
switch.
using the
switch to deactivate the seat memory when the
vehicle is being driven temporarily by a different driver whose
settings do not need to be stored in the system.
Seat memory
Applies to vehicles: with seat memory
Applies to vehicles: with seat memory
Memory for driver's seat
Storing and recalling settings
You can use the recall buttons in the driver's door to store
and recall the seat adjustments for two drivers.
ON/OFF
The
switch must be in its down position (pressed
in) before you can store and recall the desired settings.
Storing settings
– Adjust the driver's seat as required.
– Adjust both exterior mirrors.
SET
– Press and hold the
button. At the same time press
one of the recall buttons for at least a second.
Fig. 73 Driver's door:
Seat memory
– Then release the buttons. The settings are now stored on
the selected recall button.
As well as the driver's seat position, the seat memory will store and
recall the exterior mirror settings (if the vehicle is equipped accord-
ingly):
English 
