Driving
From this point onwards, only the manual
functions, using the control, allow the parking
brake to be applied and released.
► Follow this procedure again to reactivate
automatic operation (confirmed by the indicator
lamp on the instrument panel going out).
6-speed manual gearbox Automatic gearbox
6
Automatic 8-speed gearbox with push selector.
Engaging 5th or 6th gear
It also offers a manual mode with gear changes
via control paddles located behind the steering
wheel.
► Move the gear selector fully to the right to
engage 5th or 6th gear.
Failure to follow this instruction could
cause permanent damage to the gearbox
(inadvertent engagement of 3rd or 4th gear).
Push selector
Emergency braking
If depressing the brake pedal fails to provide
effective braking or in exceptional circumstances
(e.g. driver unwell, assisted driving), the vehicle
can be braked by sustained pulling on the
electric parking brake control. Braking continues
for as long as the control is kept pulled, and
ceases when the control is released.
Engaging reverse gear
The ABS and DSC systems stabilise the vehicle
during emergency braking.
If emergency braking malfunctions, the message
"Parking brake fault" will be displayed on the
instrument panel.
P. Auto Park
Press this button to switch to Parking mode.
For parking the vehicle: the front wheels are
blocked.
If the ABS and DSC systems
malfunction, indicated by lighting
► Raise the ring under the knob and move the
one or both warning lamps on the instrument
panel, the vehicle’s stability is no longer ensured.
► In this case, ensure the vehicle's stability by
successive and repeated "pull-release" actions
on the electric parking brake control until the
vehicle comes to a complete stop.
gear selector to the left, then forwards.
R. Reverse
N. Neutral
Only engage reverse gear when the
vehicle is stationary with the engine at
idle.
To free-wheel and move the vehicle, with the
ignition off.
For more information on Free-wheeling, refer
to the corresponding section.
D. Driving in automatic mode
The gearbox manages gear changes
according to the style of driving, the road
profile and the vehicle load.
As a safety precaution and to facilitate
starting the engine:
– Always select neutral.
– Press the clutch pedal.
101