Advertisement

Advertisement

Driving -> Blind spot monitoring for Your Citroen C4 SUV Third Generation (2020-2025)

Driving  
► Press and hold this button to deactivate or  
press briefly to reactivate the system at any time.  
Deactivation is signalled by the lighting of  
the indicator lamp in the button and this  
warning lamp in the instrument panel.  
Activation/Deactivation  
With Touch screen BLUETOOTH audio  
system or MyCitroën Play  
6
The settings are changed via the Driving  
touch screen menu.  
With MyCitroën Drive Plus  
With MyCitroën Drive  
It is configured in the ADAS touch screen  
application or via the Shortcuts for  
driving aids.  
Deactivation is confirmed by the  
illumination of this indicator lamp on the  
instrument panel.  
The settings are changed via the Vehicle  
touch screen menu.  
This system warns the driver of a potential  
danger posed by the presence of another vehicle  
(car, lorry, motorcycle) in the vehicle's blind  
spots (areas hidden from the driver's field of  
vision) using sensors located on the sides of the  
bumpers.  
With MyCitroën Drive Plus  
The settings are changed via the ADAS  
touch screen application.  
When starting the vehicle, the warning lamp  
comes on in each mirror to indicate that the  
system is activated.  
Malfunction  
In the event of a malfunction,  
these warning lamps light up on  
The status of the system is memorised when the  
ignition is switched off.  
the instrument panel, accompanied by the  
display of a message and an audible signal.  
Have it checked by a CITROËN dealer or a  
qualified workshop.  
The system is automatically deactivated  
when towing with a towing device  
approved by CITROËN.  
Blind spot monitoring  
A warning lamp appears in the door mirror on the  
side in question:  
fixed, immediately, when being overtaken.  
flashing, after a delay of about one second,  
when overtaking a vehicle slowly, and when the  
direction indicator is used.  
Operating conditions  
For more information, refer to the  
General recommendations on the use  
of driving and manoeuvring aids.  
– All vehicles are moving in the same direction  
and in adjacent lanes.  
– The speed of your vehicle must be between  
7 and 87 mph (12 and 140 km/h) (versions  
without Park Assist) or between 19 and 87 mph  
(30 and 140 km/h) (versions with Park Assist).  
– When overtaking a vehicle, the speed  
difference is less than 6 mph (10 km/h).  
131  
Driving  
– When overtaken by a vehicle, the speed  
difference is less than 16 mph (25 km/h).  
– Traffic is flowing normally.  
– Overtaking a vehicle over a certain period of  
time and the vehicle being overtaken remains in  
the blind spot.  
You are driving on a straight or slightly curved  
road.  
Your vehicle is not pulling a trailer, a caravan,  
etc.  
Have it checked by a CITROËN dealer or a  
qualified workshop.  
The system may be temporarily disturbed  
by certain weather conditions (e.g. rain,  
hail).  
In particular, driving on a wet road or going  
from a dry to a wet area can cause false  
alerts (e.g. presence of a cloud of water  
droplets in the blind spot interpreted as a  
vehicle).  
In bad or wintry weather, ensure that the  
sensors are not covered by mud, ice or snow.  
Take care not to cover the warning zone in  
the door mirrors, or the detection zones on  
the front and rear bumpers with adhesive  
labels or other objects; they may hamper  
correct operation of the system.  
Operating limits  
No alert is triggered in the following conditions:  
– presence of stationary objects (e.g. parked  
vehicles, safety rails, lampposts, signs).  
– vehicles travelling in the opposite direction.  
– on winding roads or in case of sharp turns.  
– when overtaking or being overtaken by a  
very long vehicle (e.g. truck, bus), which is both  
detected in a blind spot from behind and present  
in the driver's field of vision from the front.  
– quick overtaking manoeuvre.  
Active Safety Brake with  
Collision Risk Alert and  
Intelligent emergency  
braking assistance  
– very heavy traffic: vehicles detected in front  
and behind are confused with a lorry or a  
stationary object.  
For more information, refer to the  
General recommendations on the use  
of driving and manoeuvring aids.  
– activation of the Park Assist function.  
Malfunction  
If the event of a malfunction, this warning  
lamp lights up on the instrument panel,  
accompanied by the display of a message.  
132  
Driving  
With Touch screen BLUETOOTH audio  
6
system or MyCitroën Play  
The settings are changed via the Driving  
touch screen menu.  
This system:  
– warns the driver that their vehicle is at risk of  
collision with the vehicle in front, a pedestrian or,  
depending on version, a cyclist.  
– reduces the vehicle's speed to avoid a  
collision or limit its severity.  
With MyCitroën Drive  
The settings are changed via the Vehicle  
touch screen menu.  
With MyCitroën Drive Plus  
The settings are changed via the ADAS  
touch screen application.  
Deactivation of the system is signalled by  
the illumination of this warning lamp,  
accompanied by the display of a message.  
The speed will be reduced by a  
maximum of 12 mph (20 km/h) (versions  
with camera only) or by a maximum of 31  
mph (50 km/h) (versions with camera and  
radar).  
The vehicle has a multifunction camera located  
at the top of the windscreen and, depending on  
version, a radar located in the front bumper.  
This system does not replace the need  
for driver vigilance.  
Operating conditions and  
limits  
This system is designed to assist the driver  
and improve road safety.  
It is the driver's responsibility to continuously  
monitor traffic conditions in accordance with  
applicable driving regulations.  
The system also takes motorcyclists into  
account.  
Vehicle moving forward without trailer.  
Brake system operational.  
This system is comprised of three functions:  
– Collision Risk Alert.  
– Intelligent emergency braking assistance  
(iEBA).  
– Active Safety Brake (automatic emergency  
braking).  
Seat belts fastened for all passengers.  
Stabilised speed on roads with no or low  
curvature.  
This warning lamp lights up on the  
instrument panel without any additional  
message, to indicate that the automatic braking  
system is not available.  
As soon as the system detects a  
potential collision, it prepares the braking  
circuit. This may cause a slight noise and a  
slight sensation of deceleration.  
This is a normal behavior indicating that a  
condition is not fulfilled and which does not  
request the support of a workshop.  
In any situations with ignition on where automatic  
braking presents a risk, deactivating the system  
is recommended, for instance:  
Deactivation/Activation  
By default, the system is automatically activated  
at every engine start.  
133