Get Driving -> Top Rear Vision - 360 Vision (MyCitro?n Play or MyCitro?n Drive) Guide for Citroen C4 SUV Third Generation (2020-2025)

Driving

• "Zoom view".

• "AUTO view".

The display is immediately updated with the type

of view selected.

the system is activated when the vehicle has

already moved, the view from above can be fully

displayed.

Top Rear Vision

The system status is not saved when the ignition

is switched oﬀ.

Rear view

Operating principle

The screen is divided into two parts with a

contextual view and a view from above the

vehicle in its close surroundings.

The parking sensors supplement the information

on the view from above the vehicle.

Various contextual views may be displayed:

– Standard view.

Using one or two cameras, the close

surroundings of the vehicle are recorded whilst

manoeuvring at low speed.

An image from above your vehicle in its close

surroundings is reconstructed (represented

between the brackets) in real time and as the

manoeuvre progresses.

It facilitates the alignment of your vehicle when

parking and allows obstacles close to the vehicle

to be seen. It is automatically deleted if the

vehicle remains stationary for too long.

With 360 Vision, the image is created using

both cameras, when going forward and when

reversing.

To activate the camera located near the number

plate lamps, engage reverse gear and do not

exceed a speed of 6 mph (10 km/h).

The system is deactivated:

– Automatically, at speeds above approximately

12 mph (20 km/h),

– Automatically, if the boot is opened.

– When changing out of reverse gear.

– By pressing the white arrow in the upper-left

corner of the touch screen.

– 180° view.

– Zoom view.

AUTO mode is activated by default.

In this mode, the system chooses the best

view to display (standard or zoom).

You can change the type of view at any time

during a manoeuvre.

► Press the button in the bottom left-hand

corner of the touch screen.

► Select the type of view:

When the function is activated, it is possible

that the view from above is not displayed. If

• "Standard view".

• "180° view".

140

Driving

AUTO mode

The red line 2 represents a distance of 30 cm

from the rear bumper; the two blue lines 3 and 4

represent 1 m and 2 m, respectively.

This view is available with AUTO mode or in the

view selection menu.

180° view

6

Zoom view

This mode is activated by default.

Using sensors in the rear bumper, the automatic

view changes from the rear view (standard) to

the view from above (zoom) as an obstacle is

approached at the level of the red line (less than

30 cm) during a manoeuvre.

Standard view

The 180° view facilitates reversing out of a

parking space, making it possible to see the

approach of vehicles, pedestrians and cyclists.

This view is not recommended for carrying out a

complete manoeuvre.

It features 3 areas: left A, centre B and right C.

This view is only available via the view selection

menu.

The camera records the vehicle's surroundings

during the manoeuvre in order to create a

view from above the rear of the vehicle in its

near surroundings, allowing the vehicle to be

manoeuvred around nearby obstacles.

This view is available with AUTO mode or in the

view selection menu.

Obstacles may appear further away than

they actually are.

It is important to monitor the sides of the

vehicle during the manoeuvre, using the

mirrors.

360 Vision

The vehicle has a camera at the front, ﬁtted in

the grille, and a camera at the rear, located close

to the number plate lamps.

Using these cameras, the system displays the

vehicle's near surroundings on the touch screen,

The area behind the vehicle is displayed on the

screen.

The blue lines 1 represent the width of your

vehicle, with the mirrors unfolded; their direction

changes according to the position of the steering

wheel.

Parking sensors also provide additional

information about the area around the vehicle.

141

Driving

oﬀering views from the rear of the vehicle (rear

vision) when reverse gear is engaged and views

from the front of the vehicle (front vision) when

the gearbox is in neutral or a gear is engaged.

The rear vision views are similar to those for the

Top Rear Vision function.

For more information on the Top Rear

Vision function, refer to the corresponding

section.

AUTO mode

Rear vision

Front and rear vision

This mode is activated by default.

Using sensors in the front bumper, the automatic

view changes from the front view (standard) to

the view from above (zoom) as an obstacle is

approached during a manoeuvre.

Standard view

The system activates automatically when

reverse gear is engaged.

The system is deactivated:

– Automatically, at speeds above approximately

12 mph (20 km/h),

With the engine running and the speed

below 12 mph (20 km/h), the system is

activated via the Driving/Vehicle touch screen

menu:

– when shifting out of reverse (the rear view

image is replaced by the front view image after

7 seconds).

– By pressing the white arrow in the upper-left

corner of the touch screen.

► Select "Visual parking assistance".

AUTO mode is displayed by default, with front

vision, if the gearbox is in neutral or with a

gear engaged, or with rear vision, if reverse is

engaged.

The area in front of your vehicle is displayed on

the screen.

The orange lines 1 represent the width of your

vehicle, with the mirrors unfolded; their direction

changes according to the position of the steering

wheel.

The system is deactivated:

If a trailer or a bicycle carrier is ﬁtted to

the towball, the area behind the vehicle

on the view from above goes dark.

The surroundings are reconstructed by the

front camera only.

– Automatically above about 19 mph (30 km/h)

(the image disappears temporarily from 12 mph

(20 km/h)).

– By pressing the white arrow in the upper-left

corner of the touch screen.

142

Driving

The red line 2 represents a distance of 30 cm

from the front bumper; the two orange lines 3

and 4 represent 1 m and 2 m, respectively.

This view is available with AUTO mode or in the

view selection menu.

180° view

Top Rear Vision - 360

Vision

6

With MyCitroën Drive Plus

Top Rear Vision

Zoom view

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

When reverse gear is engaged, with the engine

running, this system displays views of the

vehicle's close surroundings on the touch screen

using a camera located at the rear of the vehicle.

The 180° view assists with exiting from a parking

space in forward gear, making it possible to

see the approach of vehicles, pedestrians and

cyclists.

This view is not recommended for carrying out a

complete manoeuvre.

The camera records the vehicle's surroundings

during the manoeuvre in order to create a

view from above the front of the vehicle in its

near surroundings, allowing the vehicle to be

manoeuvred around obstacles nearby.

This view is available with AUTO mode or in the

view selection menu.

It consists of 3 areas: left A, centre B and right

C.

This view is available only from the view

selection menu.

The screen is divided into 3 parts with a side

menu, a contextual view and a view from above

the vehicle in its close surroundings.

The parking sensors supplement the information

in the view from above the vehicle.

Obstacles may appear further away than

they actually are.

It is important to check the sides of the

vehicle during the manoeuvre, using the

mirrors.

Diﬀerent contextual views are available:

– Automatic zoom view.

The parking sensors also supplement the

information on the vehicle's surroundings.

143

Driving -> Top Rear Vision - 360 Vision (MyCitro?n Play or MyCitro?n Drive) for Your Citroen C4 SUV Third Generation (2020-2025)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals