Get Driving -> Top Rear Vision - 360 Vision (MyCitro?n Drive Plus) Guide for Citroen C4 SUV Third Generation (2020-2025)

Driving

The red line 2 represents a distance of 30 cm

from the front bumper; the two orange lines 3

and 4 represent 1 m and 2 m, respectively.

This view is available with AUTO mode or in the

view selection menu.

180° view

Top Rear Vision - 360

Vision

6

With MyCitroën Drive Plus

Top Rear Vision

Zoom view

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

When reverse gear is engaged, with the engine

running, this system displays views of the

vehicle's close surroundings on the touch screen

using a camera located at the rear of the vehicle.

The 180° view assists with exiting from a parking

space in forward gear, making it possible to

see the approach of vehicles, pedestrians and

cyclists.

This view is not recommended for carrying out a

complete manoeuvre.

The camera records the vehicle's surroundings

during the manoeuvre in order to create a

view from above the front of the vehicle in its

near surroundings, allowing the vehicle to be

manoeuvred around obstacles nearby.

This view is available with AUTO mode or in the

view selection menu.

It consists of 3 areas: left A, centre B and right

C.

This view is available only from the view

selection menu.

The screen is divided into 3 parts with a side

menu, a contextual view and a view from above

the vehicle in its close surroundings.

The parking sensors supplement the information

in the view from above the vehicle.

Obstacles may appear further away than

they actually are.

It is important to check the sides of the

vehicle during the manoeuvre, using the

mirrors.

Diﬀerent contextual views are available:

– Automatic zoom view.

The parking sensors also supplement the

information on the vehicle's surroundings.

143

Driving

– Standard view.

– Panoramic view.

► The washing of the reversing camera is

triggered by operating the rear screenwash.

approaching an obstacle at the red line (less

than 30 cm) during the manoeuvre.

Depending on the context, the system chooses

the best view to display (standard or automatic

zoom).

The view type can be changed at any time

during the manoeuvre.

This view is only available automatically.

Settings

Obstacles may appear further away than

they actually are.

It is important to monitor the sides of the

vehicle during the manoeuvre, using the

mirrors.

In the side menu, this menu allows you to

carry out the following operations:

– adjust the volume of the audible signal.

– adjust the brightness.

The system status is not saved when the ignition

is switched oﬀ.

– adjust the contrast.

Parking sensors also provide additional

information about the area around the vehicle.

Operating principle

Activation/Deactivation

To activate the camera, engage reverse gear.

The system is deactivated:

Standard view

– when changing out of reverse gear.

– by pressing the cross in the top left-hand

corner of the touch screen.

Automatic zoom view

The area behind the vehicle is displayed on the

screen.

The blue lines 1 represent the width of your

vehicle, with the mirrors unfolded; their direction

changes according to the position of the steering

wheel.

The red line 2 represents a distance of 30 cm

from the rear bumper; the two blue lines 3 and 4

represent 1 m and 2 m, respectively.

This view is available automatically or by

selection in the side menu.

Using the camera, the vehicle's close

surroundings are recorded during low speed

manoeuvres.

An image from above the vehicle in its close

surroundings is created in real time (on the side

of the screen), as the vehicle progresses.

This view makes it easier to align the vehicle

when parking and to perceive nearby obstacles.

It is automatically deleted if the vehicle remains

stationary for too long.

The rear camera records the vehicle's

surroundings during the manoeuvre in order to

create a view from above the rear of the vehicle

in its close surroundings, allowing the vehicle to

be manoeuvred around nearby obstacles.

Using the sensors located on the rear bumper,

the automatic zoom view is displayed when

An additional jet is ﬁtted above the number plate

to clean the reversing camera (depending on

version).

144

Driving

Panoramic view

Operating principle

Reconstructed view

6

The cameras are activated and a reconstruction

of a view from above your vehicle in its close

surroundings is displayed on the touch screen.

Live view

The panoramic view allows you to leave, in

reverse, a parking space by anticipating the

arrival of vehicles, pedestrians or cyclists.

This view is not recommended for carrying out a

complete manoeuvre.

The screen is divided into 4 parts with two side

menus, a contextual view and a view from above

the vehicle in its close surroundings.

The parking sensors supplement the information

in the view from above the vehicle.

Depending on the view angle chosen in the

left-hand side menu, the system provides

speciﬁc visual assistance in particular driving

conditions, such as entering a blind intersection

or manoeuvring in areas with reduced visibility.

Diﬀerent contextual views are available for the

rear or for the front:

This view is only available by selection in the

side menu.

The front and rear views automatically appear in

the view from above the vehicle.

It is also possible to display any live view by

selecting the corresponding zone.

The front view can be selected in forward gear

up to 10 mph (16 km/h).

360 Vision

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

Installing the very cold climate screen

can alter the image transmitted by the

front camera.

This system allows you to view your vehicle's

close surroundings on the touch screen using

cameras, located at the front and rear of the

vehicle.

– Automatic zoom view.

– Standard view.

– Panoramic view.

An additional jet is ﬁtted above the number plate

to clean the reversing camera (depending on

version).

► The washing of the reversing camera is

triggered by operating the rear screenwash.

Depending on the context, the system chooses

the best view to display (standard or automatic

zoom).

The view type can be changed at any time

during the manoeuvre.

Settings

The system status is not saved when the ignition

is switched oﬀ.

In the side menu, this menu allows you to

carry out the following operations:

145

Driving

– adjust the volume of the audible signal.

– adjust the brightness.

– adjust the contrast.

The front or rear camera records the

surroundings during the manoeuvre to create

a front or rear view from above the vehicle in

its close surroundings, making it possible to

manoeuvre the vehicle around the surrounding

obstacles.

Using the sensors located on the front or

rear bumper, the automatic zoom view is

displayed when approaching an obstacle at the

red line (less than 30 cm) during the manoeuvre.

This view is only available automatically.

Depending on version, it can be activated/

deactivated in the ADAS application of the touch

screen.

The blue lines (at the rear)/orange lines (at the

front) 1 represent the width of your vehicle, with

the mirrors unfolded; their direction changes

according to the position of the steering wheel.

The red line 2 represents a distance of 30 cm

from the rear or front bumper; the two blue lines

(at the rear)/orange lines (at the front) 3 and

4 represent 1 m and 2 m respectively.

Activation/Deactivation

Automatic

With the rear camera, engine running and

vehicle stationary, rear vision is displayed

automatically if reverse gear is engaged.

With the front camera, engine running and speed

below 10 mph (16 km/h), rear vision is displayed

automatically if a gear is engaged.

This view is available automatically or by

selection in the left-hand side menu.

Panoramic view

Manual

► In the ADAS touch screen application,

select Functions>Panoramic Camera.

The system is deactivated:

– automatically for the rear, when changing out

of reverse gear.

– automatically for the front, above

approximately 10 mph (16 km/h).

– by pressing the cross in the top left-hand

corner of the touch screen.

Obstacles may appear further away than

they actually are.

It is important to monitor the sides of the

vehicle during the manoeuvre, using the

mirrors.

The rear or front panoramic view allows you to

leave a parking space by anticipating the arrival

of vehicles, pedestrians or cyclists.

This view is not recommended for carrying out a

complete manoeuvre.

Parking sensors also provide additional

information about the area around the vehicle.

Standard view

This view is only available by selection in the left-

hand side menu.

Automatic zoom view

Park Assist

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

Depending on the context, the area behind or in

front of your vehicle is displayed on the screen.

146

Driving

This system provides active parking assistance:

it detects a parking space and then steers in the

appropriate direction to park in the space while

the driver controls the driving direction, gear

changes, acceleration and braking.

To help the driver monitor the manoeuvre, the

system automatically triggers the display from

the Top Rear Vision or 360 Vision function and

activates the parking sensors.

The system measures the available parking

spaces and calculates the distances to obstacles

using ultrasonic sensors built into the front and

rear bumpers of the vehicle.

Activating the function

6

With MyCitroën Play or MyCitroën Drive

The function is activated in the Vehicle/

Driving touch screen menu.

Select "Park Assist".

With MyCitroën Drive Plus

► In the ADAS touch screen application,

select Functions>Park Assist.

A manoeuvre selection page is displayed on the

touch screen: by default, the "Entry" page if the

vehicle has been running since the ignition was

switched on, otherwise, the "Exit" page.

► Select the type and side of the manoeuvre to

activate the parking space search.

The selected manoeuvre can be changed at

any time, even while searching for an available

space.

Activating the function deactivates the

Blind spot monitoring system.

You can deactivate the function at any

time until the parking space entry or exit

manoeuvre begins, by pressing the arrow or

the cross located in the top left-hand corner of

the display page.

Depending on audio equipment, this

indicator lamp comes on to conﬁrm the

selection.

Selecting the type of manoeuvre

Parking space search

The system assists with the following

manoeuvres:

► You should drive at a distance of between

0.50 m and 1.50 m from the row of parked

vehicles, without ever exceeding 19 mph

(30 km/h), until the system ﬁnds an available

space.

A. Entering a "parallel" parking space

B. Leaving a "parallel" parking space

C. Entering a "bay" parking space

The parking space search is suspended at

higher speeds. The function is automatically

deactivated if the vehicle speed exceeds 31 mph

(50 km/h).

Operation

► When approaching a parking area, reduce

the speed of your vehicle to 19 mph (30 km/h)

or less.

With MyCitroën Play or MyCitroën Drive

147

Driving -> Top Rear Vision - 360 Vision (MyCitro?n Drive Plus) for Your Citroen C4 SUV Third Generation (2020-2025)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals