ACCe s s
The warning lamp associated with
the control a signals 3 statuses:
anti-theft protection
On starting the vehicle, the system
automatically locks the doors as
soon as you reach approximately
ꢀ0 km/h.
Note: If a door is opened, this will
automatically lock itself again when
the vehicle reaches approximately
10 km/h (6 mph).
•
lt flashes when the ignition key
is in the stop position or when
the key is not detected and the
doors are locked.
iii
•
•
It lights up when the vehi-
cle is locked with the ignition
switched on.
It goes out when the doors are
not locked.
activation/Deactivation of
the anti-intrusion protection
After switching on the ignition,
make a long press on the central
unlocking control until a message
is displayed and a beep is heard.
a
Note: Control a is inactive if the
vehicle has been locked using the
remote control or the key.
locking/unlocking from the
inside
With the doors and the boot closed,
pressing button a allows you to
control the electric central locking
and unlocking.
It is still possible to open the doors
from the inside.
If one of the doors is open or not
properly closed, central locking will
not work.
selection of doors / boot
After having selected “Plip action /
Driver” in the “Vehicle parameters /
Comfort” menu of the instrument
panel screen.
Pressing the remote control
unlocks the passenger door.
A ꢁnd successive press unlocks all
of the doors and the boot.
if you decide to drive with the doors locked, remember that
in the event of an accident this renders access more diffi-
cult for the emergency services.
92
English 