CARGO NeT (TOUReR)
•
•
Unroll the cargo net and posi-
tion one of the ends of the net’s
metal bars in the corresponding
fixing location. Ensure that the
notch is correctly lodged in the
rail located inside the location 3.
2
ꢀ
ꢀ
iii
2
1
3
3
Pull on the cargo’s net’s metal
bar to position the other notch in
the 2nd fixing location.
1
To use in row 2 :
•
Open the cov-
ers ꢀ of the
correspond-
ing high fixing
locations.
The cargo net can be used behind
the rear seats (row ꢀ) when the
luggage-cover blind is not fitted, or
behind the front seats (row ꢁ).
•
•
slide the ꢀ rails 1 into the notches
2 and push the roller (lengthwise)
from right to left to lock it in.
Put the backrests of the rear
seats back into place.
•
•
From the rear
benchseat, unroll the cargo net
by pushing it to disengage the
retaining notches.
note : when using behind the front
seats, the backrests and the seat
cushions must be folded down
(see section on rear seats).
Position one of the ends of the
cargo net’s metal bar in the corre-
sponding fixing location. Ensure
that the notch is correctly lodged
in the rail located inside the loca-
tion ꢀ.
To use in row 1 :
•
Fold down the
backrests of
the rear seats.
To install :
Fold down the backrests of the
rear seats.
•
•
Position the other notch in the
2nd fixing location and pull the
metal bar towards you.
•
Open the cov-
ers 3 of the
corresponding
high fixing locations.
•
Position the cargo net roller over
the two rails 1 located behind
the rear seats (ꢀ/3 benchseat).
The two notches 2 must be posi-
tioned over the two rails.
123
English 