Driving
Adjusting the Speed Limit
Temporarily exceeding the
recognition and recommendation programmed speed
setting
F Press firmly on the accelerator pedal,
You do not have to switch the speed limiter on
in order to set the speed.
going beyond the point of resistance, to
exceed the programmed speed limit.
The speed limiter is deactivated temporarily
and the displayed programmed speed flashes.
An audible signal accompanies the flashing
of the programmed speed when exceeding
the speed is not due to an action by the driver
(steep hill, etc.).
As soon as the vehicle's speed returns to the
programmed value, the limiter operates again:
the display of the programmed speed becomes
steady again.
On sharp acceleration, as when
descending a steep hill, the speed limiter
will not be able to prevent the vehicle from
exceeding the programmed speed.
An audible signal accompanies the
flashing of the programmed speed when
exceeding the speed is not due to an
action by the driver.
To modify the limit speed setting from the
current speed of the vehicle:
F in steps of +/- 1 mph (km/h), make
successive short presses on button 2 or 3,
F continuously, in steps of +/- 5 mph (km/h),
press and hold button 2 or 3.
To modify the limit speed setting using
memorised speeds and from the touch screen:
F press button 5 to display the memorised
speed settings,
The use of mats not approved by
CITROËN may interfere with the operation
of the speed limiter.
To avoid any risk of jamming of the pedals:
F press the button for the desired speed
setting.
The selection screen closes after a few
moments.
-
-
ensure that the mat is positioned
correctly,
never fit one mat on top of another.
Switching off
F Turn wheel 1 to the 0 position. The display
of information related to the speed limiter
disappears.
This setting becomes the new limit speed.
To modify the limit speed setting from the
speed suggested by the vehicle Speed Limit
recognition and recommendation:
F the speed suggested is displayed in the
instrument panel,
F make a first press on button 5; a message
is displayed to confirm the memorisation
request,
F press button 5 again to save the suggested
speed.
The speed displays immediately in the
instrument panel as the new speed setting.
Malfunction
Flashing of the dashes indicates a fault with the
speed limiter.
Have it checked by a CITROËN dealer or
a qualified workshop.
Cruise control "CRUISE"
System which automatically
maintains the speed of the vehicle
at the value programmed by the
driver, without any action on the
accelerator pedal.
148
English 
