Get Driving -> Vision 360 Guide for Citroen Spacetourer Van First Generation (2019-2024)

Driving

Depending on version, the image is displayed

on the touch screen or the instrument panel.

The blue lines 1 represent the general direction

of the vehicle (the gap represents the width of

your vehicle except for the door mirrors).

The red line 2 represents a distance of about

30 cm beyond the edge of your vehicle's rear

bumper.

Vision 360

The reversing camera function may be

supplemented with parking sensors.

The green lines 3 represent distances of about

one and two metres beyond the edge of your

vehicle's rear bumper.

The reversing camera cannot, in any circumstances,

replace the need for vigilance on the part of the driver.

The turquoise blue curves 4 represent the

maximum turning circle.

This system allows the near surroundings of

the vehicle to be viewed in the instrument panel

using cameras.

Opening the tailgate causes the display to

disappear.

They are situated at the front and rear of the

vehicle, as well as under the door mirrors.

Depending on the angle of view chosen (front

view, rear view or 360° panoramic view), the

Vision 360 system provides a specific visual aid

in particular driving conditions, such as when

entering a blind crossroads or manoeuvring in

areas with reduced visibility.

Clean the reversing camera regularly

using a soft, dry cloth.

The representation with overlaid lines helps the

manoeuvre.

High pressure jet wash

When washing your vehicle, do not direct

the lance from less than 30 cm from the

lens of the camera.

They are represented by lines marked

"on the ground" and do not allow you to

determine the position of tall obstacles (for

example: other vehicles, etc.) relative to

the vehicle.

Once activated, this function is operational up

to 9 mph (15 km/h). Above 19 mph (30 km/h),

the system deactivates automatically.

Some distortion of the image is normal.

It is normal to have a part of the number

plate showing in the bottom of the screen.

179

Driving

This system is a visual aid that cannot in

Rear vision

Vision 360

any circumstances replace the need for

vigilance on the part of the driver.

The images provided by the camera(s)

may be distorted by the relief. The

presence of areas in shadow, bright

sunlight, or poor lighting conditions may

make the image dark and reduce contrast.

The camera situated on the tailgate is activated

and the view of the area behind your vehicle is

displayed in the instrument panel and behaves

as a reversing camera, regardless of the

position of the gear selector.

The blue outline represents the width of

your vehicle (without mirrors): its orientation

depends on the position of the steering wheel.

The red line represents the distance of 30 cm)

from the rear bumper and the two green lines

the distances of 1 m and 2 m respectively from

the rear bumper.

The cameras situated on the front and rear

bumpers as well as those below the door

mirrors activate and a view from above of your

vehicle in its close environment is generated

and is displayed in the instrument panel.

Opening a door or the tailgate will disrupt the

360 and rear views.

Installation of the very cold climate screen will

alter the image transmitted by the front camera.

Forward vision

The camera situated on the front bumper is

activated and the views of the area to the

front left and the area to the front right of your

vehicle appear simultaneously in the instrument

panel.

The rear vision is displayed automatically

when reverse gear is engaged, regardless

of the state of the system.

180

Driving

The driver can take control at any time by

Operation

F In the Driving menu, select the "Driving

functions" tab, then "Panoramic visual aid".

F Select "Camera OFF".

gripping the steering wheel.

Function activation

This manoeuvring assistance system

cannot, in any circumstances, replace the

need for vigilance on the part of the driver.

The driver must remain in control of their

vehicle ensuring that the space remains

clear throughout the manoeuvre.

In some circumstances, the sensors may

not detect small obstacles located in their

blind spots.

Check the cleanliness of the camera

lenses regularly.

High pressure jet wash

When washing your vehicle, keep the

nozzle at least 12 inches (30 cm) from the

cameras.

With the engine running:

F In the Driving menu, select the "Driving

functions" tab, then "Panoramic visual aid".

The Park Assist system cannot work with

the engine off.

Park Assist

This system provides active assistance with

parking: it detects a parking space then

operates the steering system to park in this

space.

With a manual gearbox, the driver manages

the accelerator, brakes, gears and clutch.

With an automatic gearbox (EAT6/EAT8), the

driver manages the accelerator, brakes and

gears.

On display of the menu, select one of the three

views:

"Front camera".

"360 camera".

"Rear camera".

The selected view comes up in the instrument

panel.

During phases of entry into and exit from

a parking space, the system provides visual

and audible information to the driver in order

to make the manoeuvres safe. It may be

necessary to move forwards and backwards

more than once.

The display disappears from the

instrument panel above 9 mph (15 km/h).

The Park Assist system provides assistance for

the following manoeuvres:

A. Parallel parking.

B. Exit from a parallel parking space.

C. Bay parking.

Function deactivation

F Accelerate to over 19 mph (30 km/h).

181

Driving -> Vision 360 for Your Citroen Spacetourer Van First Generation (2019-2024)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals