Advertisement

Advertisement

Practical information -> Load reduction mode for Your Citroen Spacetourer Van First Generation (2019-2024)

Practical information  
Load reduction mode  
System which manages the use of certain  
functions according to the level of charge  
remaining in the battery.  
Changing a wiper blade  
Before removing a front  
wiper blade  
If a telephone call is being made at this  
time, it will be maintained for around  
10 minutes with the Bluetooth hands-free  
system of your audio system.  
When the vehicle is being driven, the load  
reduction function temporarily deactivates  
certain functions, such as air conditioning,  
heated rear screen, etc.  
Exiting the mode  
These functions will be automatically restored  
The deactivated functions are reactivated  
automatically as soon as conditions permit.  
the next time the vehicle is used.  
In order to restore the use of these functions  
immediately, start the engine and let it run:  
-
for less than ten minutes, to use the  
equipment for approximately five minutes,  
for more than ten minutes, to use the  
equipment for up to approximately thirty  
minutes.  
Energy economy mode  
System which manages the duration of use of  
certain functions to conserve a sufficient level  
of charge in the battery.  
F Within one minute after switching off the  
ignition, operate the wiper control stalk to  
position the wiper blades vertically on the  
windscreen.  
-
After the engine has stopped, you can  
still use functions such as the audio and  
telematics system, windscreen wipers, dipped  
beam headlamps, courtesy lamps, etc. for  
a maximum combined duration of about forty  
minutes.  
Let the engine run for the duration specified to  
ensure that the battery charge is sufficient.  
Do not repeatedly and continuously restart the  
engine in order to charge the battery.  
or  
F More than one minute after switching off the  
ignition, straighten the arms manually.  
Removing  
F Lift the corresponding wiper arm.  
F Unclip the wiper blade and remove it.  
7
Switching to this mode  
A message appears in the instrument panel  
screen indicating that the vehicle has switched  
to economy mode and the active functions are  
put on standby.  
A flat battery prevents the engine from  
starting.  
For more information on the 12 V battery,  
refer to the corresponding section.  
Refitting  
F Position and clip the new wiper blade to the  
arm.  
F Fold down the wiper arm carefully.  
195