Practical information
F Fit the end of the towball into the carrier
underneath the rear bumper, as far as it can
go.
Blanking plug
In the event of recovery, it is essential to remove
the blanking plug if your vehicle has one.
To do this, contact a CITROËN dealer or
a qualified workshop.
The blanking plug is located behind the
lower air intake grille.
F Press and hold control A on the towball.
F Unlock the locking mechanism by pressing
trigger B.
F Make sure that the towball is correctly
secured in place. The two pins must be in
contact with the carrier notches and trigger
B must be returned to the "locking" position.
F Install the protective cover and clip it into
place by turning it anti-clockwise.
Towing system with
quickly detachable towball
No tools are required to install or remove the
towball on this genuine towbar system.
Trailers with LED lamps are not
compatible with the wiring harness of this
device.
F Before fitting the towball, check that the
contact points, shown by arrows, are clean.
Use a clean and soft cloth.
7
Fitting
F Connect the trailer plug to the 13 pin socket
next to the carrier.
F Secure the trailer by connecting its safety
cable to the hoop on the carrier.
F Below the rear bumper, unclip and remove
the protective cover from the carrier.
193
English 
