Practical information
Removing
F Use a screwdriver as a lever to release each
Maximum load, distributed over the roof
bars, for a loading height not exceeding
40 cm: 80 kg.
Before fitting or removing a screen,
ensure that the engine is off and the
cooling fan has stopped.
of the fixings of each screen in turn.
As this value may be changed, please
verify the maximum load quoted in the
user guide supplied with the roof bars.
If the height exceeds 40 cm, adapt the
speed of the vehicle to the profile of the
road to avoid damaging the roof bars and
the fixings on the vehicle.
Fitting
It is essential to remove the very cold
climate screen (or screens):
-
when the exterior temperature exceeds
10°C,
-
-
when towing,
at speeds above 75 mph (120 km/h).
Be sure to refer to national legislation in
order to comply with the regulations for
transporting objects which are longer than
the vehicle.
Vision 360 system
The pre-cut section must be removed
before fitting the screen on the front
bumper, in order to be able to release the
camera.
When the very cold climate screen is
present, the camera image is slightly
altered.
When carrying long objects, it is
recommended that the motorised tailgate
function is deactivated.
Very cold climate screen(s)
7
(Depending on the country where the product
is sold.)
Removable screen(s) which prevent snow
accumulating at the radiator cooling fan.
Depending on the version, you have one or two
screens.
F Offer up the corresponding very cold
climate screen to the lower or upper section
of the front bumper.
F Press around its edge to engage the fixing
clips of each screen one by one.
197
English 
