2002-2008 Cupra Born SUV Driving -> Braking system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Braking system for Your Cupra Born SUV First Generation (2002-2008)

Brakingsystem  
in city traꢀic and for short distances, or for  
sporty driving, brake pad thickness should be  
checked regularly at a specialist workshop.  
Troubleshooting  
WARNING  
Driving with worn brake pads or a defective  
brake system can lead to accidents and seri-  
ous injuries.  
Adaptive suspension (DCC) fault  
Driving with wet brakes, e.g. after driving  
through water, in heavy rain or after washing  
the vehicle, braking performance may be af-  
fected by wet brake discs, or even frozen discs  
in winter. The driver should be ready to brake  
harder.  
The control lamp switches on yellow. The in-  
strument cluster screen may display the mes-  
sage Fault: Suspension.  
●
If you suspect that the brake pads are worn  
or that the brake system is faulty, have the  
brake pads checked immediately by a spe-  
cialist workshop and replaced if they are  
worn.  
●
Have the system checked by a specialised  
workshop.  
If the brake discs and pads have a layer  
of salt on them, the braking performance is  
reduced and the braking distance increases.  
When driving on salted roads without brak-  
ing for some time, the layer of salt should  
be removed by carefully applying the brakes  
The drive proꢀles or vehicle systems do not  
behave as expected  
WARNING  
The braking performance of new brake pads  
is not optimal.  
●
Please note that diꢀerent vehicle systems are  
conꢁgured according to the selected driving  
proꢁle.  
●
During the ꢀrst 300 km, new brake pads do  
a few times ››› . Braking intensity should  
be higher than the deceleration achieved by  
brake energy recuperation, in order to clean  
oꢀ the layer of salt with the brake pad friction.  
not provide maximum braking power and still  
have to “settle”. This can be counteracted by  
applying more pressure to the brake pedal.  
Braking system  
●
When brake pads are new, drive with extra  
Information about the brakes  
care to reduce the risk of accidents, serious  
injury or loss of control of the vehicle.  
Corrosion on the brake discs and dirt on the  
brake pads increase if the vehicle is left unused  
for a long time, if it is not driven for many kil-  
ometres or the brakes are used insuꢀiciently.  
If, due to the energy recuperation eꢀect, the  
brakes are not used, or are rarely used, or if  
there is corrosion, it is advisable to clean the  
discs and pads by braking hard several times  
when driving at high speeds. When doing so,  
select gear N, so that energy recuperation is  
not used when braking. Make sure that you do  
not endanger any other vehicles or road users  
During the ꢁrst 200 to 300 km, new brake  
pads do not provide maximum braking power  
●
Only perform hard braking to clean the  
brake system when permitted by the traꢁic  
situation. Do not endanger the occupants of  
other vehicles. Accident hazard!  
and still have to “settle” ››› . When running  
in the brake pads, the emergency braking  
distance is longer than after they have been  
run in. During the run-in, avoid sharp braking  
and situations that place a lot of demand on  
the brakes, e.g. driving too close to another  
vehicle.  
●
When running in new brake pads, do not  
drive too close to other vehicles or cause sit-  
uations that would require the brakes to be  
applied heavily.  
Brake pad wear depends to a large extent on  
the conditions in which the vehicle is used, and  
driving style. If the vehicle is frequently used  
›››  
.
151  

Related Topics

Popular Owner Manuals