DrivDeriPvrinogꢀles
●
Please note the warnings displayed in the
Troubleshooting
Selecting a driving proꢀle
Digital Cockpit.
●
Steering fault
If the control lamp continues ꢀashing after
the ignition has been switched on, do not con-
tinue driving. Seek specialist assistance.
The warning lamp lights up or ꢀashes red.
There is a fault in the electromechanical steer-
ing or the electronic steering column lock.
Drive Proꢀles
●
●
Stop driving! Seek specialist assistance.
If the warning lamp lights up red, the steer-
Introduction
ing may be stiꢁ because the power steering is
not working.
The driver can use the drive proꢂles to adapt
various features of the vehicle's systems to the
current driving situation, the desired driving
comfort and an economical driving style. Some
of the systems that can be adapted are the
suspension, steering, drive system and air con-
ditioning.
●
If the warning lamp ꢁashes red, the steering
Fig. 117 Multifunction steering wheel:
DRIVE and CUPRA buttons for selecting and
changing the driving proꢀle.
column cannot be unlocked.
●
Do not allow the vehicle to be towed on its
own wheels.
The drive proꢂle can be selected when the ig-
nition is switched on and the vehicle is station-
Steering fault
Depending on the vehicle’s equipment, vari-
ous drive proꢂles can be selected. The degree
of inꢀuence of the vehicle's systems on the dif-
ferent drive proꢂles depends on the vehicle’s
equipment.
ary or moving ›››
.
The control lamp lights up or ꢀashes yellow.
The steering is stiꢁer or reacts more sensitively
than usual.
Selecting a driving proꢀle
●
●
Press the
> Drive Proꢀle function button.
> Vehicle
The control lamp lights up and remains lit:
OR: Press the function button
●
Switch the drive system back on and drive
Vehicles with adaptive suspension (DCC)
settings > Drive Proꢀle to display the available
slowly for a short distance.
proꢂles.
When driving, the adaptive suspension (DCC)
continuously adapts the suspension to the
terrain and the driving situation in question.
When doing so, the DCC also takes into ac-
count the vehicle's conꢂguration in the selec-
ted drive proꢂle.
●
Contact a specialist workshop if the control
●
OR: Press the function button , slide your
ꢂnger horizontally across the screen to Drive
Proꢀle. Press to change the driving proꢂle
lamp remains on.
The control lamp ꢁashes:
or double press on the icon to show the availa-
ble proꢂles.
●
Turn the steering wheel slightly from one
side to the other.
●
OR: With the Infotainment System turned
●
Turn oꢁ the ignition and turn it on again.
oꢁ, by pressing on the Drive Proꢀle icon, the
available driving proꢂles will be displayed.
149