2002-2008 Cupra Born SUV High-voltage battery User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

High-voltage battery for Your Cupra Born SUV First Generation (2002-2008)

Safetyinstructions
●
●
Never open, modify or remove the cover  
Always inform the ꢂre ꢂghters and the  
High-voltage battery  
from the high-voltage battery.  
emergency service that the vehicle is ꢂtted  
with a high-voltage battery.  
●
Work on the high-voltage system, as well  
Safety instructions  
Introduction  
as on any systems that may be indirectly in-  
ꢁuenced by it, should only be carried out by  
specialized personnel with the correspond-  
ing qualiꢂcations and training.  
WARNING  
If works are performed on the high-voltage  
system and on the high-voltage components  
in an inappropriate manner, this may lead  
to faults in the operation, accidents and inju-  
ries.  
WARNING  
●
Work in the immediate vicinity of high-  
voltage cables and high-voltage components  
with tools that are sharp, give oꢀ shavings or  
that have heat sources, such as hot air, ther-  
mal bonding or welding work, may only be  
performed after disconnecting the voltage.  
The high voltage should only be disconnec-  
ted by specialized personnel with the corre-  
sponding qualiꢂcations and training.  
The vehicle’s high-voltage network and the  
high-voltage battery are hazardous and can  
cause burns and other injuries, including fa-  
tal electric shocks.  
●
Work on the high-voltage system must  
only be performed by authorized specialized  
services with the corresponding permit.  
●
It should always be assumed that the high-  
voltage battery is fully charged and that all of  
its components are live. This may also be the  
case when the ignition is switched oꢀ.  
NOTICE  
●
All CUPRA guidelines and standards must  
●
Never touch the high-voltage cables, the  
be followed when performing any work on  
the high-voltage system and the high-volt-  
age battery.  
If the vehicle suꢀers an accident or collision  
with an obstacle, the high-voltage battery  
must be checked by specialized personnel  
with the corresponding qualiꢂcations and  
training.  
high-voltage battery or its poles, or allow  
them to come into contact with jewellery or  
other metal objects, especially if the high-  
voltage cables, the high-voltage battery or its  
poles are damaged.  
●
The gases that are emitted or leaked from  
the high-voltage battery may be toxic or  
ꢁammable.  
●
Never take it upon yourself to perform any  
●
Damage to the vehicle or high voltage bat-  
type of work on the high-voltage network, on  
the high-voltage cables or the high-voltage  
battery.  
tery could cause an immediate or delayed  
leak of toxic gases. The emitted gases could  
also cause a ꢂre. Do not inhale the gases.  
●
Never open or perform maintenance or  
●
Never touch the liquids that spill from the  
repairs on components or parts of the high  
voltage network, or disconnect them from  
this network.  
high voltage battery and do not touch the  
emitted gases, particularly if the battery is  
damaged.  
●
Never damage, modify or remove the or-  
●
In the event of a ꢂre, leave the danger area  
ange high voltage cables or disconnect them  
from the high voltage network.  
and call the ꢂre department.  
69  
High-voltage battery  
››› Fig. 64  
1
High voltage warning lettering  
High voltage can cause serious injury or  
even death. Never touch the battery poles  
with bare ꢀngers, tools, jewellery or other  
metal objects.  
2
The high-voltage battery contains hazard-  
ous liquid and solid substances. Emitted  
gases can cause severe burns and blind-  
ness. Suitable eye protection and protec-  
tive clothing must always be worn when  
working on the high voltage battery to  
prevent battery ꢁuid coming into contact  
with the skin and eyes. If the battery ꢁuid  
comes into contact with the skin or eyes,  
the aꢂected areas should be rinsed with  
clean running water for at least 15 minutes,  
and then a doctor should be consulted im-  
mediately.  
Fig. 64 High-voltage battery warning  
lettering.  
Warning lettering on the vehicle  
The following parts of the vehicle can be  
identiꢀed with the depicted warning lettering  
››› Fig. 63, ››› Fig. 64:  
Covers and lids behind which live high-volt-  
age components are located.  
3
The high-voltage battery may burn. The  
high-voltage battery should never be ex-  
posed to ꢀre, sparks or naked ꢁame. The  
high voltage battery must always be han-  
dled with care to avoid damage and ꢁuid  
leakages.  
Fig. 63 Warning lettering.  
●
●
All the high-voltage components, including  
the high-voltage battery.  
4
5
The high-voltage battery should always be  
kept out of the reach of children.  
●
Under the front bonnet.  
The warning lettering ››› Fig. 63 and indi-  
cate high electrical voltage.  
You will ꢀnd further information and warn-  
ings in the usage instructions and work-  
shop documentation.  
The components of the high voltage system  
can become very hot and should not be  
6
Incorrect handling of the high-voltage  
battery can cause serious injuries or death.  
Never disassemble the high voltage bat-  
tery or remove its cover.  
touched ››› Fig. 63  
.
70  
Conservationofthehigh-voltage battery  
Conservation instructions  
7
●
Maintenance work on the high-voltage  
battery must only be performed by speci-  
alized personnel with the corresponding  
qualiꢀcations and training. Never modify  
the high-voltage battery. When the high-  
voltage battery is open, ensure it does not  
come into contact with water or other  
liquids. Liquids may cause short circuits,  
electrical shocks and burns.  
To improve comfort and performance, make  
sparse use of the stationary air conditioning  
(depending on the equipment), particularly in  
CUPRA recommends the following conserva-  
tion instructions:  
temperatures lower than -15 °C ››› page 136.  
●
When using the vehicle regularly, do not  
charge the battery to 100 %. Set a maximum  
charge limit of 80 % in the charging settings.  
NOTICE  
The high-voltage battery must not be used  
as a stationary power supply. This can cause  
irreversible damage to the high-voltage bat-  
tery.  
●
As much as possible avoid fully discharging  
the high-voltage battery, such as by leaving the  
vehicle parked for a prolonged time with a low  
load level. The charge level must not drop be-  
Conservation of the high-  
voltage battery  
low 20 % for long periods of time ›››  
.
NOTICE  
●
Before long trips, charge the high voltage  
battery to 100%. Set the departure time in the  
infotainment system ››› page 79 and start  
driving as soon as possible.  
If the vehicle is parked for a long time with  
the high-voltage battery discharged, it may  
no longer be possible to charge the bat-  
tery or start the vehicle. Irreversible damage  
could be caused to the high voltage battery  
in the long term.  
Conservation instructions  
Reliability and capacity of the high-voltage  
battery  
●
To prolong the life of the high-voltage bat-  
tery, use DC direct current fast charging as lit-  
tle as possible.  
In principle, lithium ion batteries are subject  
to ageing and wear and tear throughout their  
useful life due to their physical and chemical  
characteristics. Correct handling of the high-  
voltage battery makes an essential contribu-  
tion to keeping it in a reliable state in the  
long term and to achieving high battery ca-  
pacity and range. Therefore, it is extremely  
important to respect the following conserva-  
tion instructions for the high voltage battery.  
These maintenance instructions are essential  
for maintaining the vehicle's value over time.  
●
Charge the high-voltage battery at regular  
intervals.  
Vehicle parking times  
●
If there is a frost, do not park the vehicle for  
Note  
several hours with a charge level of lower than  
40 % ›››  
.
The high voltage battery provides less power  
when the outside temperature is very low. If  
its state of charge is also low, the power may  
decrease a lot shortly after starting to drive  
●
If the vehicle is to be parked for an extended  
period of time, the battery charge level should  
be between 40% and 70%.  
››› page 142.  
●
Avoid exposing the vehicle to temperatures  
below -30 °C as far as possible, or to direct  
sunlight at high temperatures.  
Please also observe the applicable CUPRA war-  
ranty conditions for the high-voltage battery.  
71  
High-voltage battery  
●
Charging with alternating current (AC) at a  
●
Always respect the stipulated order of the  
Charging the high-voltage  
battery  
household socket ››› page 74:  
operations to avoid the risk of suꢀering an  
electric shock or serious injuries due to the  
residual energy in the charging accumulator.  
The electrical installation of the house must  
have been checked and be in perfect working  
order ››› . Due to the large capacity of the  
battery and the low power of this method, a full  
charge will take more than 20 hours.  
●
Please observe the safety and handling  
Introduction  
instructions of the charging cable supplied  
with the vehicle ››› page 85.  
●
When charging, only use power sockets  
●
Charging with direct current (DC) at a fast  
that are appropriately ꢂtted, have been  
checked and are not damaged, as well as  
electrical installations that are in perfect  
working order. Duly qualiꢂed technicians  
should check the power sockets and the  
electrical installation on a regular basis.  
charging station ››› page 75:  
It is the most powerful type of charge. The  
charging time diminishes signiꢀcantly. Please  
note the information on charging frequently  
with direct current (DC) ›››  
.
●
Never charge the vehicle in places where  
there is a danger of explosion. The compo-  
nents of the charging cable can cause sparks  
and, therefore, may ignite ꢁammable fumes  
or explosives.  
Protection against current leakage  
Fig. 65 Location of the high-voltage  
battery.  
The vehicle is ꢀtted with a direct current (DC)  
leakage protection device. This prevents any  
current leakage that may occur during charg-  
ing from reaching the house's electrically in-  
stallation through the charging cable.  
●
Always protect the connectors from mois-  
ture and from water and other ꢁuids getting  
inside directly.  
Check that the drive system is deactivated and  
that the charging cable and infrastructure are  
in a perfect state of repair.  
●
For safety reasons, never perform other  
WARNING  
works on the vehicle while charging.  
●
Always complete the charging process be-  
If the battery is charged in an inappropri-  
ate manner, if no consideration is given to  
the appropriate safety measures or the high-  
voltage battery is used in an inadequate  
manner, this could lead to short circuits,  
electrical shocks, explosions, ꢂres, burns and  
serious injuries, even death.  
Types of charging  
fore unplugging the connector from the  
electrical network. Otherwise the charging  
cable and the electrical installation may also  
be damaged.  
The following charging types are possible for  
the vehicle:  
●
Charging with alternating current (AC) at a  
public or home charging station ››› page 74:  
Charges at high power. The maximum achiev-  
able charging power depends on the charging  
station and charging cable that is used and the  
performance of the vehicle's charger.  
72  
Chargingthehigh-voltagebattery  
●
In the event of very low or very high tem-  
Compatibility between vehicles and charg-  
ing infrastructure  
WARNING  
peratures, it may only be possible to charge  
the high-voltage battery in a limited manner.  
If the vehicle is driven with a very low a  
charge level of the high-voltage battery, the  
vehicle may stall in traꢀic, causing serious  
damage or accidents and injuries.  
The following indicators according to the  
EN 17186 standard provide information about  
whether the infrastructure's charging connec-  
Identiꢂcation of compatible charg-  
ing infrastructure  
tors are suitable for the vehicle ›››  
.
NOTICE  
Indicators ››› Fig. 66  
In the vehicle  
Fast charging with direct current (DC) uses  
very high power. Frequent use of fast charg-  
ing can permanently reduce the charging ca-  
pacity of the high-voltage battery.  
At the charging station  
●
The battery should preferably be charged  
Indicators ››› Fig. 67  
with alternating current (AC) from a public or  
domestic charging station.  
Voltage up to 500 volts  
Fig. 66 Identiꢀcation of alternating current  
(AC) and type 2 connector.  
Voltage of up to 1000 volts.  
The indicators are located on the vehicle's  
charging socket, on components of the lo-  
cal charging infrastructure (charging station,  
socket) and on the charging cable. The indi-  
cators refer to charging connection standards  
according to IEC 62196.  
Note  
●
To charge the high-voltage battery us-  
ing alternating current (AC), CUPRA recom-  
mends using a home charging station or an-  
other type of charging station and charging  
with maximum charging power. These charg-  
ing options are more eꢀicient than using a  
domestic power socket.  
WARNING  
Fig. 67 Identiꢀcation of direct current  
(DC) and the vehicle's CCS connector  
●
Please note the technical data on your ve-  
Charging the vehicle at unveriꢂed electrical  
installations can cause serious injury and  
damage.  
hicle's charging power. You can get more in-  
formation from a specialised CUPRA dealer  
or any SEAT network dealer.  
●
If there is no indicator or if the charging in-  
●
The high-voltage battery can only be  
frastructure is unknown, an electrical instal-  
charged at charging stations that meet the  
requirements of the country in questions and  
at least one of the following standards:  
lation expert should be consulted ꢂrst.  
–
IEC 61851 and IEC 62196 (Europe)  
73  
High-voltage battery  
●
Charging cable for domestic power sockets:  
If the charging process indicator lights up red,  
there is a fault ››› page 76.  
Charging with alternating current  
(AC)  
The protection device performs a self-test  
››› page 87.  
●
Interrupt the charging process  
With the vehicle unlocked, the battery  
charging cover opens when it is pressed  
The charging process can be interrupted:  
››› Fig. 68.  
●
●
Unlock the vehicle.  
●
Plug the charging connector into the charg-  
Press the Stop chargingfunction but-  
ing socket. Check that the charging connector  
is fully plugged in.  
ton of the infotainment system. The charging  
process indicator located next to the charg-  
ing socket lights up white . If you want  
The connector locks automatically.  
1
the charging connector to unlock automati-  
cally, the Release connector automatically  
setting must be selected in the charging set-  
The LED (charging process indicator) of  
the charging socket ꢁashes or ꢁashes white  
1
››› Fig. 68 ››› page 76.  
Fig. 68 Behind the battery charging cover  
on the rear right-hand side: Charging  
socket  
tings ››› page 79.  
You can set the charging as required in the  
infotainment system ››› page 81.  
●
Press the Continuebutton to restart the  
process. The charging connector locks. In  
some cases you make need to authenticate  
yourself again in the charging station.  
››› Fig. 68  
Automatic start of the charging process  
1
Charging process display  
If programmed charging is not activated,  
the charging process starts immediately  
To restart the charging process just press the  
function button to start the charging process.  
2
Charging socket  
››› page 79. The external charging infra-  
The battery charger installed in the vehicle  
converts alternating current from the public  
supply into direct current.  
structure must be active.  
After charging  
Most public charging stations require authen-  
tication to start the process. It is important  
to verify that the authentication has been per-  
formed correctly, otherwise it could cause a  
system malfunction.  
When the high-voltage battery is fully charged,  
the charging process display on the charging  
socket lights up green.  
AC charging station or socket cable: The vehi-  
cle’s high-voltage battery can be charged us-  
ing alternating current (AC) through the corre-  
●
●
Unlock the vehicle.  
2
sponding charging socket  
.
Unplug the charging connector from the  
During the charging  
charging socket within 30 seconds.  
Connecting the charging cable  
The charging process indicator on the charg-  
●
Firstly, connect the charging cable to the  
1
ing socket ꢁashes green . The charging con-  
socket, or public or home charging station.  
Next, fully unwind it.  
nector is locked.  
74  
Chargingthehigh-voltagebattery  
●
OR: if Release connector automatically  
The alternating current is converted into direct  
current outside the vehicle. A considerably  
higher charging power is achieved than when  
charging with alternating current (AC).  
Most public charging stations require authen-  
tication to start the process. It is important  
to verify that the authentication has been per-  
formed correctly, otherwise it could cause a  
system malfunction.  
is activated in the charging settings  
››› page 79, the charging connector auto-  
matically unlocks once the charging process is  
complete.  
Public fast-charging station: The high-voltage  
battery can be charged with direct current  
(DC) at an appropriate charging station. The  
charging time diminishes signiꢀcantly.  
●
Disconnect the charging cable from the  
During the charging  
power supply and replace the protective cap.  
The charging process indicator on the charg-  
●
Close the charging cover and make sure you  
1
ing socket ꢁashes green ››› Fig. 69  
.
hear it click into place.  
Use a charging cable less than 30 metres long.  
If the charging process indicator lights up red,  
there is a fault ››› page 76.  
Connecting the charging cable  
Charging with direct current (DC)  
●
●
Unlock the vehicle.  
Interrupt the charging process  
Press the battery's charging socket cover to  
open it.  
The charging process can be stopped before  
the desired state of charge is reached:  
●
Remove the protective cap and hang it on  
3
the hook ››› Fig. 69  
●
Press the STOPfunction button on the info-  
tainment system's display. The charging proc-  
ess indicator located next to the charging  
●
Plug the charging station’s charging connec-  
2
tor into the charging socket ››› Fig. 69  
The connector locks automatically.  
1
socket lights up white ››› Fig. 69 . The  
charging connector is unlocked.  
The LED (charging process indicator) of  
the charging socket ꢁashes or ꢁashes white  
After charging  
Fig. 69 Behind the battery charging cover  
on the rear right-hand side.  
1
››› Fig. 69 ››› page 76  
When the desired state of charge has been  
reached, the charging process indicator on the  
charging socket will light up green.  
Automatic start of charging  
››› Fig. 69  
Switch on the charging station ›››  
.
After charging, the charging connector auto-  
matically unlocks from the charging station.  
1
2
3
Charging process display  
The charging process will start immediately.  
Charging socket  
Protective cap  
75  
High-voltage battery  
●
Unplug the charging connector from the  
White LED  
charging socket.  
●
1
Flashing: establishment of communica-  
●
Place the protective cap on the charging  
tion between the vehicle and the charging  
infrastructure. The charging process is being  
prepared.  
3
socket’s lower connection ››› Fig. 69  
●
Close the cover of the battery charging  
●
Permanently on: no active charging function  
socket until you hear it has engaged.  
Green LED  
NOTICE  
●
2
Flashing: the high-voltage battery is  
charging.  
To use the charging station, bear in mind  
the manufacturer’s indications and usage in-  
structions.  
●
3
Flashing: delayed charging is activated.  
The charging process has not yet started.  
●
4
Permanently on: the charging process has  
completed without any problems.  
Fig. 71 On the inside face of the cover  
of the battery charging socket: sticker  
with information on the charging process  
display.  
Charging process display  
●
Flashes red: emergency charging at reduced  
power due to a failure to recognize the charg-  
ing connector.  
Red LED  
●
Permanently on: there is a fault in the system.  
An LED light on the charging socket ››› Fig. 70  
(arrow) shows the status of the charging proc-  
ess.  
The charging process cannot start or has been  
interrupted.  
Get specialist assistance if the charging proc-  
ess indicator permanently indicates a defect.  
A sticker on the battery charging cover pro-  
vides information on the meaning of the LEDs  
››› Fig. 71.  
Charging socket lighting  
Fig. 70 Behind the battery charging  
socket cover: charging process indicator.  
In the dark, the charging socket's side lighting  
(white LED) can facilitate orientation in the ve-  
hicle:  
Charging process displays:  
The LED ꢀashes  
●
The vehicle has detected the charging con-  
nector.  
76  
Chargingthehigh-voltagebattery  
●
●
On  
Switch oꢂ the drive system.  
Seek professional assistance.  
If the message is hidden, the warning lamp re-  
mains visible  
.
●
●
The vehicle has been unlocked.  
The audible warning can only be turned oꢂ  
by a qualiꢀed workshop. CUPRA recommends  
that you visit an oꢂicial dealer.  
OR: The charging connector has been un-  
plugged from the charging socket.  
and  
Danger of ꢂre!  
Oꢀ  
The warning lamp lights up red and is dis-  
played along with with a text message on the  
instrument cluster accompanied by a continu-  
ous audible warning.  
WARNING  
●
After unlocking or locking the vehicle, the  
lighting switches oꢂ automatically after a while.  
If there is a risk of ꢂre in the high-voltage  
battery, toxic gases may escape or compo-  
nents may be released from the high voltage  
battery. There is a risk of serious injury, burns  
or lethal electric shocks.  
Charging process indicator lamp  
The high voltage battery temperature is too  
high  
.
During the charging process, the  
displayed on the instrument cluster display.  
lamp is  
If this message is displayed on the instrument  
●
››P›aprkagthee6v5e,hBicelheasvaifoeulyraisnstohoeneavsepnotsosifbalen  
cluster, please note ›››  
below:  
and follow the steps  
White indicator: connector plugged in, no  
charging process active.  
accident or ꢀre.  
●
Stop driving! Stop the vehicle immedi-  
Green indicator: connector plugged in,  
charging process active.  
●
Get out of the vehicle and keep a safe dis-  
ately, taking into account the traꢂic situation.  
tance away from it.  
●
Choose a safe place outdoors, away from  
●
Call the ꢂre department immediately.  
buildings or vehicles, canopies, covered car  
parks or similar places.  
Troubleshooting  
Deep discharge of the high-voltage bat-  
●
Before leaving the vehicle, make sure it is im-  
Fault in the high voltage system  
tery due to prolonged parking time  
mobilised (parking brake, parking lock P).  
The warning lamp lights up red. A message is  
displayed in this regard.  
●
Switch oꢂ the ignition and leave the ignition  
The control lamp lights up red. A message is  
displayed.  
key on the dash panel or in a visible place.  
There is a fault in the high voltage system. The  
high voltage components may be damaged  
●
Exit the vehicle and make sure that there are  
The high-voltage battery can be damaged if,  
for example, the vehicle is not used for a long  
time.  
no other people or animals left inside.  
›››  
.
●
Make sure that you leave the danger zone to-  
It is not possible to charge the high-voltage  
battery.  
gether with all other occupants of the vehicle  
and that everyone remains in an area that is  
protected from traꢂic (e.g. behind the guard  
rail).  
●
Charge the high-voltage battery immedi-  
ately.  
●
The vehicle must be parked in a safe  
place. Park the vehicle outdoors as soon as it is  
possible and safe to do so.  
●
Notify the emergency services.  
77  
High-voltage battery  
●
Check if a fault is displayed on the charging  
High voltage battery discharged  
WARNING  
station or, depending on the equipment, on  
the charging cable protection device.  
The control lamp switches on yellow. A mes-  
sage is displayed.  
High-voltage components, including the bat-  
tery and high-voltage cables, may be live and  
damaged. The high voltage system voltage is  
dangerous and can cause burns, other inju-  
ries and fatal electric shocks.  
If the fault cannot be rectiꢀed, contact a spe-  
cialist workshop immediately.  
●
Charge the high-voltage battery immedi-  
ately.  
The charging cable protection device dis-  
connects  
●
Do not touch the high voltage compo-  
Low state of charge in the high-voltage  
nents!  
battery  
If electrical devices with a separate electrical  
connection, e.g. a cool box, are used in the  
vehicle at the same time, the self-test of the  
protective device may detect a fault.  
The control lamp switches on yellow. A mes-  
sage is displayed showing the remaining range.  
Emergency release of the charging  
connector  
The high-voltage battery charge has reached  
the reserve level.  
●
Please note the order! First connect the  
charging cable to the external power supply  
and then to the charging socket.  
●
Charge the high-voltage battery.  
Range calculation fault  
The charging time varies  
The control lamp switches on yellow. A mes-  
sage is displayed.  
During the direct current (DC) charging proc-  
ess, the charging current is reduced automat-  
ically to preventing the high-voltage battery  
from overheating.  
There is a fault in the range calculation. Con-  
tact a specialised workshop.  
After several fast charging processes in a row,  
the charging time is temporarily extended.  
The charging process is not possible or has  
been paused  
Fig. 72 On the lower right-hand side of  
the luggage compartment trim: cover with  
cutting lines.  
The charging process indicator located next to  
the charging socket lights up red.  
Before visiting a specialist workshop, you can  
try the following solutions:  
●
●
Plug the charging cable back in.  
Check that the charging connector is plug-  
ged in correctly.  
78  
Chargingsettings
Emergency electrical release of the charging  
connector  
WARNING  
If the charging connector unexpectedly re-  
mains locked, the fault may be caused by the  
vehicle or charging station.  
To avoid having to perform a manual emer-  
gency release in the luggage compartment,  
try releasing the charging connector electroni-  
cally using the vehicle’s central locking.  
The manual emergency release can make live  
contacts accessible. In this case, touching  
the contacts of the charging socket may re-  
sult in burns, other injuries or a fatal electric  
shock.  
●
●
Unlock the vehicle three times in a row.  
Unplug the charging connector.  
●
Never touch the contacts of the charging  
Manual release of the charging connector  
Fig. 73 Behind the cover: emergency  
unlock of the charging connector.  
socket or the charging connector.  
●
Open the luggage compartment. On the  
lower right hand side there is a cover with a  
lock.  
Note  
Unlocking the charging connector  
The manual release mechanism of the charg-  
ing connector should only be used in the  
event of a failure.  
●
Turn the cover lock through 90º ››› Fig. 72  
1
.
Prerequisites:  
●
Press the surface over the lock inwards  
●
The charging connector is plugged in cor-  
››› Fig. 72 (marked zone).  
rectly.  
●
●
●
Insert your hand through the opening and  
The vehicle is unlocked.  
Charging settings  
pull the cover oꢂ. If necessary, apply a suitable  
The charging process has ended or has  
2
object along the cutting lines ››› Fig. 72  
.
paused ››› page 72.  
Introduction  
●
Open the cover.  
●
When charging with alternating current  
Immediate charging  
●
Pull the emergency manual release loop  
(AC), the setting Release connector auto-  
matically is activated in the infotainment sys-  
tem. ››› page 79.  
The high-voltage battery can be charged with-  
out further conꢀguration and according to  
1
››› Fig. 73 . The charging connector can be  
removed ›››  
.
the available charging option ››› page 74 ,  
●
The manual release mechanism must be used  
if these prerequisites are met and it is still  
impossible to unplug the charging connector  
›››  
Close the luggage compartment trim cover  
››› page 75.  
and lock.  
Get a specialist workshop to inspect the charg-  
ing socket immediately.  
79  
High-voltage battery  
1. Plug in the charging cable A charging infor-  
mation screen opens in the infotainment  
system. The charging process starts auto-  
matically.  
Changing the charging mode  
The available charging modes can be selected  
via a drop-down list in the Energy Manager  
menu or in the departure menu ››› page 37.  
The available charging modes depend on the  
Routine conꢀguration and the technical re-  
quirements at the location.  
2. Set the maximum battery charge level for  
the desired range in the Infotainment sys-  
tem.  
Advanced charging conꢂguration  
Individual AC charging settings for your desired  
location, e.g. at your home, oꢂice or charg-  
ing station, are available if a charging location  
(from now on Routine) has been created in the  
Infotainment system.  
1. Press the e-Managerfunction button in  
the vehicle settings ››› page 35.  
2. Store the current charging location in the  
Routinesmenu ››› page 83.  
If you want to performed programmed  
charging, establish and activate a depar-  
ture time ››› page 84.  
3. Make further adjustments if desired.  
Note  
If no start time has been activated, the high-  
voltage battery charges to the maximum  
charge level.  
80  
Chargingsettings
Overview  
Fig. 74 In the infotainment system: e-Manager  
menu in the vehicle settings.  
3
11  
Current state of charge of the high-voltage  
battery.  
Navigation symbol with planned charging  
stops: the maximum charging level is auto-  
matically adjusted for the next suggested  
stop.  
Indications in the e-Managermenu  
Some of the following indications are  
only available when a routine is active  
››› page 83.  
4
5
Current electric range.  
Minimum set charging level or charge sug-  
gested by the navigation system to reach  
the set destination ››› page 82.  
General charging settings ››› page 82.  
Routine settings ››› page 83.  
1
Charging mode selector (only visible when  
a routine is active). It also provides infor-  
mation on the charge completion time or  
Instructions for plugging in the charging  
connector  
6
7
Information on the current charging process is  
displayed in the infotainment system.  
scheduled departure time ››› page 83.  
2
Charging speed and power: the increase in  
range per hour or per minute when charg-  
ing at the current charging power is dis-  
played. The charging power depends on  
the charging infrastructure and the tem-  
perature of the high-voltage battery. The  
charging power can vary during the proc-  
ess.  
8
9
Close the screen:  
End the charge or start it again.  
●
●
Press the function button.  
Maximum set battery charging level  
››› page 82.  
OR: the display ends automatically after 2  
minutes.  
10  
Touch pad for adjusting the maximum  
●
OR: lock the vehicle.  
charging level of the battery ››› page 82.  
81  
High-voltage battery  
The function can be used by a main user and a  
guest user of the My CUPRA service. The main  
user can activate and deactivate the function  
in the vehicle.  
Plug & Charge function  
Conꢂguration in the Settings menu  
The vehicle battery is authenticated and the  
charging process starts automatically at a suit-  
able home or public charging station, as soon  
as the charging cable is plugged in.  
Open the General charging settings menu  
1. Press the e-Managerfunction button in  
To delete the functionality and all Plug &  
Charge data, you must reset the vehicle to fac-  
tory settings ››› page 237.  
the vehicle settings ››› page 35.  
No manual authentication is required to start  
the charging process or to make payment. The  
function depends on the equipment and the  
country.  
6
2. Press the ››› Fig. 74 button.  
Settings in unknown locations  
Set the battery charging limits  
●
Reduce the AC charging power: the charging  
Prerequisites:  
current is reduced to 6 or 8 amps depending  
on the country. With this setting you can re-  
duce the mains overload when charging at a  
socket.  
The infotainment system can be used to adjust  
the maximum and minimum charge level and  
thus the vehicle’s range to suit daily needs.  
●
The charging station supports the Plug &  
Charge function in accordance with ISO 15118.  
●
A mobility service provider (MSP) energy  
●
Release the AC power cable: After the charg-  
contract has been installed using the MyCU-  
PRAapp.  
Maximum battery charging level  
ing process is complete, the connector relea-  
ses automatically.  
Normally, if you use the vehicle regularly, it is  
not necessary to fully charge the high-voltage  
battery. The maximum charging level limits the  
battery's maximum state of charge.  
In order to change the contract installation,  
the main user must be logged into the vehicle.  
Battery Care Mode function  
●
Before charging with Plug & Charge, the pri-  
The function automatically limits the maxi-  
mum charge level to 80% for subsequent  
charges.  
vacy mode must be deactivated. The vehicle  
has active data transmission and localization  
●
Move the touch slider to the desired value  
in the infotainment system's charging settings  
››› page 81.  
The maximum charging level can also be adap-  
ted during charging.  
››› page 223.  
●
Plug & Charge has been activated in the Info-  
Note  
tainment system.  
●
The programmed charge setting overrides  
●
My CUPRA contract.  
the Battery Care setting (the maximum  
charge level is not automatically reset).  
Minimum charging level of the battery  
Note  
●
CUPRA recommends using the Battery  
The minimum charging level sets the minimum  
state of charge for a saved routine. This func-  
tion can be used to guarantee a minimum  
range.  
If you have any questions about My CUPRA,  
please contact CUPRA customer services  
Care Mode function in daily use to prolong  
the life of the high-voltage battery.  
››› page 222.  
82  
Chargingsettings
●
Press the e-Managerbutton in the infotain-  
Settings  
Set charging locations (Routines)  
ment system's vehicle settings ››› page 35.  
●
●
For immediate charging in the current rou-  
You can create routines associated with charg-  
ing locations in the infotainment system. The  
vehicle recognises a saved charging location  
when it is there, and uses the available settings  
when charging.  
Set the minimum charging level in the rou-  
tine, activate the corresponding function in  
the departure menu ››› page 37 or in the  
charging modes selector located in the e-  
Manager ››› page 81 menu.  
tine.  
After connecting the electricity, ꢀrst of all the  
vehicle charges up to the battery's minimum  
charging level. The preferred times or a de-  
parture time, for programmed charging, will  
only be taken into account once this limit is  
reached.  
●
Departure time ››› page 84  
Reduce the AC charging power: the charg-  
Location data  
●
ing current is reduced to 6 or 8 amps. With  
this setting you can reduce the mains overload  
when charging at a socket.  
The infotainment system uses the current lo-  
cation data (geographical coordinates) of the  
vehicle when you create or use a routine.  
Examples for charging with alternating cur-  
rent (AC)  
●
Release the AC power cable: After the charg-  
Creating a routine  
ing process is complete, the connector relea-  
ses automatically.  
For AC charging, CUPRA recommends the fol-  
lowing settings:  
●
Press the e-Managerbutton in the infotain-  
●
Minimum battery charging level from 0-50%  
ment system's vehicle settings ››› page 35.  
Everyday use - Long range is not necessary  
››› page 82.  
●
Click on the “Routines” tab.  
●
Maximum battery charging level: 80 % maxi-  
●
Maximum battery charging level from  
●
Add the charging location and give it a name  
mum.  
50-100% ››› page 82.  
(maximum of 5).  
●
Minimum battery charging level: 20 % as a  
●
Preferred times. Activating this charging  
minimum if the outside temperature is mild or  
warm, or 40% if it is cool or cold.  
mode can be helpful when there are other  
electrical consumers in the household or when  
you prefer to charge during cheaper time peri-  
ods.  
Deleting a routine  
●
Press the e-Managerbutton in the infotain-  
Long distance travel - Long range required  
ment system's vehicle settings ››› page 35.  
●
●
Maximum battery charging level: 100 %.  
Minimum battery charging level: 20 % as a  
●
●
●
Click on the “Routines” tab.  
●
Display address or geographical coordinates  
Press the function button.  
minimum if the outside temperature is mild or  
warm, or 40 % if it is cool or cold.  
Press the function button to delete the  
Note  
saved routine.  
●
Avoid leaving the vehicle parked and start  
All charging settings stored in the routine  
always apply to the currently recognised  
charging location.  
driving immediately after charging the battery.  
83  
High-voltage battery  
Activate a departure time  
Prerequisites  
Departure time settings  
●
●
●
●
Click on the “Routines” tab.  
Compatible home energy management sys-  
When a charging location has been created,  
the high-voltage battery can be charged for a  
certain time.  
tem (HEMS).  
Open the proꢀle of a charging location.  
Activate the departure time by checking the  
●
●
Compatible charging station.  
checkbox  
.
A charging location (routine) has been cre-  
Set the departure time  
ated in the Infotainment system.  
●
Select the desired programmed charging  
mode on the charging mode selector.  
●
Press the e-Managerbutton in the infotain-  
Note  
ment system's vehicle settings ››› page 35.  
Ask specialist personnel for conꢂrmation  
about a suitable home energy management  
system. It is recommended to use a CUPRA  
partner.  
Displays  
●
●
●
Click on the “Routines” tab.  
The departure time is used weekly.  
Open the proꢀle of a charging location.  
Set a departure time (maximum of three per  
location).  
Functionality  
Note  
–
–
Days of the week.  
The high-voltage battery is charged by solar  
power when the solar power system produces  
more electricity than is needed in the home,  
on sunny days for example.  
Time at which the high-voltage battery  
The departure menu remembers the active  
charging mode and gives the option to mod-  
should be charged.  
ify it ››› page 37.  
–
Use once or weekly.  
Air conditioning  
Selecting the charging mode  
Charging with a home en-  
ergy management system  
The vehicle interior is cooled or heated for the  
departure time by the stationary air condition-  
ing. The operation depends on the equipment.  
●
Press on the drop-down charging mode  
list and select Charge with solar energy  
››› page 81.  
The charging process starts automatically.  
●
Set the desired temperature in the stationary  
Charging with solar energy  
air conditioning menu ››› page 136.  
The vehicle uses the available solar energy and  
is charged according to the speciꢀcations of a  
home energy management system.  
●
Select the Charge and air conditioning  
prior to departure function from the drop-  
down list of charging modes.  
84  
Chargingcable
The charging or discharging process starts  
automatically.  
Functionality  
Note  
The home energy management system con-  
trols the high-voltage battery charging or dis-  
charging process, as necessary.  
Depending on the power supplied by the so-  
lar installation and the household's instan-  
taneous electricity consumption, the charg-  
ing process may start earlier than usual and  
continue later. If necessary, the vehicle au-  
tomatically regulates the available charging  
phases for safety reasons.  
2. Check the desired battery charge level in  
the charging routine proꢀle.  
In the Infotainment system you can choose  
between the charging modes Bi-directional  
charging (charging and discharging) and dis-  
charging (discharging only) of the high-volt-  
age battery.  
Note  
●
It can read the amount of power drawn  
from the home energy management system.  
The vehicle discharges with a maximum  
power of around 10kW.  
Current monitor  
To limit the energy transferred, set the battery  
charge levels in the Infotainment system. The  
lower battery charge level is limited to 20% for  
technical reasons.  
●
The use of the function is limited to avoid  
The instantaneous current ꢁow in the home  
is monitored. Before overloading the house’s  
power grid, the vehicle automatically reduces  
the charging current.  
excessive wear of the high voltage battery.  
When the maximum values on the operat-  
ing hours meter (4,000 h) and energy quan-  
tity meter (10,000 kWh) have been reached  
in the Settingsmenu, contact the technical  
service.  
It is not possible to schedule a charge for a  
departure time.  
In addition, the home energy management  
system can use electricity from the high-volt-  
age battery in the event of a power failure or to  
power a home without a grid connection.  
Bidirectional Charging  
Prerequisites  
Charging cable  
●
●
Vehicle with 77 kWh net battery capacity.  
Compatible home energy management sys-  
tem (HEMS) and two-directional DC charging  
station.  
Introduction  
Note  
Read and follow the home energy manage-  
ment system’s user and operating manual.  
The type of charging cable supplied with the  
vehicle depends on the delivery volume and  
the speciꢀc technical speciꢀcations of each  
country, e.g. charging connector connections  
for power sockets.  
●
A charging location (Routine) has been cre-  
ated in the Infotainment system.  
Selecting the charging mode  
Note  
1. Press the drop-down list of charging  
CUPRA recommends exclusively using the  
supplied charging cable.  
modes and select Bi-directional Charging  
or Discharging ››› page 81.  
Ask specialist personnel for conꢂrmation  
about a suitable home energy management  
system. It is recommended to use a CUPRA  
partner.  
85  
High-voltage battery  
WARNING  
Notes on the charging cable  
WARNING  
●
●
●
●
●
●
●
Handle with care.  
Items that are not secured, or incorrectly se-  
cured can cause serious injury during sudden  
manoeuvres or braking, or in the event of an  
accident.  
The charging cable for electrical sockets  
must always be connected directly to an  
electrical socket. Failure to do so could result  
in ꢂre damage and damage to the charging  
cable or home electrical installation.  
Unroll and roll fully.  
Do not twist or bend it over sharp edges.  
Do not crush it or drive the vehicle over it.  
Always unplug it by pulling on the connector.  
Children should not use the charging cable.  
Keep animals away from the charging cable.  
After use, store it safely and without twisting  
●
Store the charging cable securely in the  
●
luggage compartment.  
Never connect the charging cable to an  
extension lead, cable reel, power strip or  
adapter or timer.  
●
Use the organizer/protective cover provi-  
ded with the cable for this purpose.  
●
it.  
WARNING  
WARNING  
The high voltage system voltage is dangerous  
and can cause burns, other injuries and fatal  
electric shocks.  
Using a charging cable that has been dam-  
aged or tampered with can cause serious in-  
jury and fatal electric shocks.  
Notes on charging connectors and the  
charging cable protection device  
●
Only clean the charging cable when it is  
●
Do not touch the charging connector’s con-  
●
Before each use check that the connectors  
unplugged.  
tacts.  
and the charging cable are undamaged, e.g.  
check for cracks.  
●
Protect from strong sunlight (outside tem-  
●
Never disassemble the charging cable or its  
peratures no higher than 50°C or 122°F).  
NOTICE  
components.  
●
●
Do not drop them.  
Seek information regarding the appropriate  
charging cable and the maximum permitted  
charging current before travelling abroad. If  
possible, use the charging cable supplied in  
the country in question.  
●
Never use a charging cable that is damaged  
Protect from immersion in ꢁuids such as rain  
or has been tampered with.  
water.  
●
If the charging cable does not work cor-  
●
Fit the protective caps after each use.  
rect, get a specialised CUPRA dealer or any  
SEAT dealership to look at it.  
Cleaning the charging cable  
NOTICE  
Clean the surface of the charging cable with a  
The charging cable, as portable electrical  
equipment, may have to be checked periodi-  
cally. This requires a test adapter.  
dry or slightly damp cloth ››› , ›››  
.
86  
Chargingcable
Charging cable for alternating cur-  
rent (AC) charging stations  
NOTICE  
NOTICE  
The charging cable can be damaged if not  
cleaned properly.  
Follow the manufacturer’s instructions and  
indications when using the charging station.  
●
Only water should be used for this pur-  
pose, and never additional cleaning prod-  
ucts.  
Note  
Charging with a charging cable for 16 A is  
not possible at some charging stations that  
support 32 A. This depends on the charging  
station’s equipment.  
●
Water should be prevented from getting  
into the contacts.  
For the sake of the environment  
●
Before charging the vehicle, ꢂnd out about  
the available charging technology.  
Charging cables must be disposed of in an  
environmentally friendly way and should not  
be thrown in the household waste.  
Fig. 75 Charging cable for alternating  
current (AC) charging stations.  
Charging cable for power sockets  
Note  
The maximum charging current is 16 or 32  
amps, depending on the vehicle’s features and  
The maximum charging capacity of the  
safety circuit that is used must be observed.  
If the charging cable is planned into an elec-  
trical socket on the same circuit as other  
consumers, the circuit's fuses may trip.  
the charging cable that is supplied ›››  
.
WARNING  
Charging the high-voltage battery with an in-  
appropriate charging cable could cause short  
circuits, serious injuries and fatal electrical  
shocks.  
Fig. 76 Charging cable for electrical  
sockets  
WARNING  
The charging cable should not be used as an  
extension lead. The charging process could  
be aꢀected.  
87  
High-voltage battery  
If the local mains supply does not allow charg-  
ing at the maximum charging current, the  
charging current can be reduced, depending  
on the charging setting features in the infotain-  
Self-check  
When the charging cable is plugged into the  
electrical socket, the protective device au-  
tomatically performs a self-test. During this  
check, all warning and indicator lamps turn on  
brieꢁy and go out one after the other. Upon  
completion, the operational status at that time  
is displayed.  
ment system ››› page 84.  
Temperature control  
The charging cable temperature control  
switches on when the charging cable over-  
heats, such as when it has been stored in a lug-  
gage compartment exposed to high tempera-  
tures or strong sunlight.  
Operating displays  
Fig. 77 On the charging cable for power  
sockets: Indicator lamps on the protection  
device.  
1
2
One or more control lamps ››› Fig. 77  
,
3
or  
light up green.  
Meaning  
Display ››› Fig. 77  
Meaning  
The charging cable is  
Display ››› Fig. 77  
››› Fig. 77:  
1
4
,
ꢁashing  
The housing connector  
has overheated.  
1
ignition  
1
Indicator lamp of the connector and the  
plugged into the mains  
power supply.  
2
4
,
ꢁashing  
The protection device  
has overheated.  
1
3
2
,
on,  
The high-voltage bat-  
tery is charging.  
2
3
Control lamp of the protection device  
Control lamp of the vehicle  
Failure warning lamp  
ꢁashes slowly  
If the charging process continues with a lower  
current, both the operating indicator and the  
››› page 88  
4
1
2
3
and  
on  
The charging process  
is complete. The high-  
voltage battery has  
charged.  
4
warning lamp ››› Fig. 77  
ꢁash red.  
Charging cable information  
●
Unplug the charging cable from the mains  
and wait for it to cool down.  
Before using the charging cable, also follow the  
instructions displayed on it and on the rear of  
the protective device.  
●
If it disconnects again, or the charging cur-  
rent reduces and the cause does not seem to  
be exposure to an external heat source, make  
sure that the green control lamp is ꢁashing  
››› Fig. 77. Visit a specialised CUPRA dealer or  
any SEAT network dealer to check the charg-  
ing cable. Get an establishment that special-  
ises in electrical installations to check the in-  
frastructure connection.  
Set the charging current  
The charging cable limits the charging current  
according to the available power supply.  
Protection device  
The electronic protection device ››› Fig. 77  
ensures that the charging connector does not  
receive current until it is plugged in to the vehi-  
cle's charging connector.  
88  
Chargingcable
Fault display  
4
If the red warning light  
ꢁashes or turns on  
without one of the indicator lamps ››› Fig. 77  
1
2
3
,
or  
also turning on continuously on  
the status indicator, there is a fault.  
Meaning  
Display ››› Fig. 77  
1
4
4
4
ꢁashing,  
or ꢁashing  
on  
on  
on  
Failure in the power  
supply.  
2
ꢁashing,  
or ꢁashing  
Failure in the protection  
device.  
3
ꢁashing,  
or ꢁashing  
Failure in the vehicle.  
The charging process pauses or is cancelled.  
●
Check the instructions located on the back  
of the protective devices.  
●
Seek professional assistance if the fault per-  
sists.  
Note  
If there is any other mains connection dur-  
ing the charging process, or if the vehicle is  
right next to the high voltage cables, charg-  
ing from an electrical socket is not possible in  
some cases. Additional mains connections:  
●
●
Connecting a 12 volt battery charger.  
Contact with a work tool connect to the  
mains, such as a vehicle lift.  
89  

Related Topics

Popular Owner Manuals