2002-2008 Cupra Born SUV High-voltage battery -> Charging settings User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

High-voltage battery -> Charging settings for Your Cupra Born SUV First Generation (2002-2008)

Chargingsettings
Emergency electrical release of the charging  
connector  
WARNING  
If the charging connector unexpectedly re-  
mains locked, the fault may be caused by the  
vehicle or charging station.  
To avoid having to perform a manual emer-  
gency release in the luggage compartment,  
try releasing the charging connector electroni-  
cally using the vehicle’s central locking.  
The manual emergency release can make live  
contacts accessible. In this case, touching  
the contacts of the charging socket may re-  
sult in burns, other injuries or a fatal electric  
shock.  
●
●
Unlock the vehicle three times in a row.  
Unplug the charging connector.  
●
Never touch the contacts of the charging  
Manual release of the charging connector  
Fig. 73 Behind the cover: emergency  
unlock of the charging connector.  
socket or the charging connector.  
●
Open the luggage compartment. On the  
lower right hand side there is a cover with a  
lock.  
Note  
Unlocking the charging connector  
The manual release mechanism of the charg-  
ing connector should only be used in the  
event of a failure.  
●
Turn the cover lock through 90º ››› Fig. 72  
1
.
Prerequisites:  
●
Press the surface over the lock inwards  
●
The charging connector is plugged in cor-  
››› Fig. 72 (marked zone).  
rectly.  
●
●
●
Insert your hand through the opening and  
The vehicle is unlocked.  
Charging settings  
pull the cover oꢀ. If necessary, apply a suitable  
The charging process has ended or has  
2
object along the cutting lines ››› Fig. 72  
.
paused ››› page 72.  
Introduction  
●
Open the cover.  
●
When charging with alternating current  
Immediate charging  
●
Pull the emergency manual release loop  
(AC), the setting Release connector auto-  
matically is activated in the infotainment sys-  
tem. ››› page 79.  
The high-voltage battery can be charged with-  
out further conꢁguration and according to  
1
››› Fig. 73 . The charging connector can be  
removed ›››  
.
the available charging option ››› page 74 ,  
●
The manual release mechanism must be used  
if these prerequisites are met and it is still  
impossible to unplug the charging connector  
›››  
Close the luggage compartment trim cover  
››› page 75.  
and lock.  
Get a specialist workshop to inspect the charg-  
ing socket immediately.  
79  
High-voltage battery  
1. Plug in the charging cable A charging infor-  
mation screen opens in the infotainment  
system. The charging process starts auto-  
matically.  
Changing the charging mode  
The available charging modes can be selected  
via a drop-down list in the Energy Manager  
menu or in the departure menu ››› page 37.  
The available charging modes depend on the  
Routine conꢁguration and the technical re-  
quirements at the location.  
2. Set the maximum battery charge level for  
the desired range in the Infotainment sys-  
tem.  
Advanced charging conꢀguration  
Individual AC charging settings for your desired  
location, e.g. at your home, oꢀice or charg-  
ing station, are available if a charging location  
(from now on Routine) has been created in the  
Infotainment system.  
1. Press the e-Managerfunction button in  
the vehicle settings ››› page 35.  
2. Store the current charging location in the  
Routinesmenu ››› page 83.  
If you want to performed programmed  
charging, establish and activate a depar-  
ture time ››› page 84.  
3. Make further adjustments if desired.  
Note  
If no start time has been activated, the high-  
voltage battery charges to the maximum  
charge level.  
80  
Chargingsettings
Overview  
Fig. 74 In the infotainment system: e-Manager  
menu in the vehicle settings.  
3
11  
Current state of charge of the high-voltage  
battery.  
Navigation symbol with planned charging  
stops: the maximum charging level is auto-  
matically adjusted for the next suggested  
stop.  
Indications in the e-Managermenu  
Some of the following indications are  
only available when a routine is active  
››› page 83.  
4
5
Current electric range.  
Minimum set charging level or charge sug-  
gested by the navigation system to reach  
the set destination ››› page 82.  
General charging settings ››› page 82.  
Routine settings ››› page 83.  
1
Charging mode selector (only visible when  
a routine is active). It also provides infor-  
mation on the charge completion time or  
Instructions for plugging in the charging  
connector  
6
7
Information on the current charging process is  
displayed in the infotainment system.  
scheduled departure time ››› page 83.  
2
Charging speed and power: the increase in  
range per hour or per minute when charg-  
ing at the current charging power is dis-  
played. The charging power depends on  
the charging infrastructure and the tem-  
perature of the high-voltage battery. The  
charging power can vary during the proc-  
ess.  
8
9
Close the screen:  
End the charge or start it again.  
●
●
Press the function button.  
Maximum set battery charging level  
››› page 82.  
OR: the display ends automatically after 2  
minutes.  
10  
Touch pad for adjusting the maximum  
●
OR: lock the vehicle.  
charging level of the battery ››› page 82.  
81  
High-voltage battery  
The function can be used by a main user and a  
guest user of the My CUPRA service. The main  
user can activate and deactivate the function  
in the vehicle.  
Plug & Charge function  
Conꢀguration in the Settings menu  
The vehicle battery is authenticated and the  
charging process starts automatically at a suit-  
able home or public charging station, as soon  
as the charging cable is plugged in.  
Open the General charging settings menu  
1. Press the e-Managerfunction button in  
To delete the functionality and all Plug &  
Charge data, you must reset the vehicle to fac-  
tory settings ››› page 237.  
the vehicle settings ››› page 35.  
No manual authentication is required to start  
the charging process or to make payment. The  
function depends on the equipment and the  
country.  
6
2. Press the ››› Fig. 74 button.  
Settings in unknown locations  
Set the battery charging limits  
●
Reduce the AC charging power: the charging  
Prerequisites:  
current is reduced to 6 or 8 amps depending  
on the country. With this setting you can re-  
duce the mains overload when charging at a  
socket.  
The infotainment system can be used to adjust  
the maximum and minimum charge level and  
thus the vehicle’s range to suit daily needs.  
●
The charging station supports the Plug &  
Charge function in accordance with ISO 15118.  
●
A mobility service provider (MSP) energy  
●
Release the AC power cable: After the charg-  
contract has been installed using the MyCU-  
PRAapp.  
Maximum battery charging level  
ing process is complete, the connector relea-  
ses automatically.  
Normally, if you use the vehicle regularly, it is  
not necessary to fully charge the high-voltage  
battery. The maximum charging level limits the  
battery's maximum state of charge.  
In order to change the contract installation,  
the main user must be logged into the vehicle.  
Battery Care Mode function  
●
Before charging with Plug & Charge, the pri-  
The function automatically limits the maxi-  
mum charge level to 80% for subsequent  
charges.  
vacy mode must be deactivated. The vehicle  
has active data transmission and localization  
●
Move the touch slider to the desired value  
in the infotainment system's charging settings  
››› page 81.  
The maximum charging level can also be adap-  
ted during charging.  
››› page 223.  
●
Plug & Charge has been activated in the Info-  
Note  
tainment system.  
●
The programmed charge setting overrides  
●
My CUPRA contract.  
the Battery Care setting (the maximum  
charge level is not automatically reset).  
Minimum charging level of the battery  
Note  
●
CUPRA recommends using the Battery  
The minimum charging level sets the minimum  
state of charge for a saved routine. This func-  
tion can be used to guarantee a minimum  
range.  
If you have any questions about My CUPRA,  
please contact CUPRA customer services  
Care Mode function in daily use to prolong  
the life of the high-voltage battery.  
››› page 222.  
82  
Chargingsettings
●
Press the e-Managerbutton in the infotain-  
Settings  
Set charging locations (Routines)  
ment system's vehicle settings ››› page 35.  
●
●
For immediate charging in the current rou-  
You can create routines associated with charg-  
ing locations in the infotainment system. The  
vehicle recognises a saved charging location  
when it is there, and uses the available settings  
when charging.  
Set the minimum charging level in the rou-  
tine, activate the corresponding function in  
the departure menu ››› page 37 or in the  
charging modes selector located in the e-  
Manager ››› page 81 menu.  
tine.  
After connecting the electricity, ꢁrst of all the  
vehicle charges up to the battery's minimum  
charging level. The preferred times or a de-  
parture time, for programmed charging, will  
only be taken into account once this limit is  
reached.  
●
Departure time ››› page 84  
Reduce the AC charging power: the charg-  
Location data  
●
ing current is reduced to 6 or 8 amps. With  
this setting you can reduce the mains overload  
when charging at a socket.  
The infotainment system uses the current lo-  
cation data (geographical coordinates) of the  
vehicle when you create or use a routine.  
Examples for charging with alternating cur-  
rent (AC)  
●
Release the AC power cable: After the charg-  
Creating a routine  
ing process is complete, the connector relea-  
ses automatically.  
For AC charging, CUPRA recommends the fol-  
lowing settings:  
●
Press the e-Managerbutton in the infotain-  
●
Minimum battery charging level from 0-50%  
ment system's vehicle settings ››› page 35.  
Everyday use - Long range is not necessary  
››› page 82.  
●
Click on the “Routines” tab.  
●
Maximum battery charging level: 80 % maxi-  
●
Maximum battery charging level from  
●
Add the charging location and give it a name  
mum.  
50-100% ››› page 82.  
(maximum of 5).  
●
Minimum battery charging level: 20 % as a  
●
Preferred times. Activating this charging  
minimum if the outside temperature is mild or  
warm, or 40% if it is cool or cold.  
mode can be helpful when there are other  
electrical consumers in the household or when  
you prefer to charge during cheaper time peri-  
ods.  
Deleting a routine  
●
Press the e-Managerbutton in the infotain-  
Long distance travel - Long range required  
ment system's vehicle settings ››› page 35.  
●
●
Maximum battery charging level: 100 %.  
Minimum battery charging level: 20 % as a  
●
●
●
Click on the “Routines” tab.  
●
Display address or geographical coordinates  
Press the function button.  
minimum if the outside temperature is mild or  
warm, or 40 % if it is cool or cold.  
Press the function button to delete the  
Note  
saved routine.  
●
Avoid leaving the vehicle parked and start  
All charging settings stored in the routine  
always apply to the currently recognised  
charging location.  
driving immediately after charging the battery.  
83  

Related Topics

Popular Owner Manuals