2002-2008 Cupra Born SUV Parking and manoeuvring User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Parking and manoeuvring for Your Cupra Born SUV First Generation (2002-2008)

Parking and manoeuvring  
WARNING  
NOTICE  
Parking and manoeu-  
vring  
If the vehicle is parked incorrectly, it could  
roll away, even on gentle slopes. This can  
cause accidents and serious injuries.  
The presence of irregularities on the ground,  
sand or mud can cause damage to the vehicle  
and mean that it cannot be parked properly.  
●
●
When parking, always carry out the opera-  
Always park the vehicle on ꢀrm and ꢁat  
Park the vehicle  
tions in the stipulated order.  
ground.  
Parking  
● Before leaving the vehicle, make sure that  
the electronic parking brake is applied and  
that the control lamp next to the gear se-  
lector is red on the instrument cluster.  
NOTICE  
When parking your vehicle, all legal require-  
ments should be observed.  
Components on the underside of the vehicle,  
such as bumpers, spoilers and running gear  
components, can be damaged when running  
over objects protruding from the ground.  
1. Press the brake pedal and keep it pressed.  
2. Connect the electronic parking brake  
WARNING  
If children, people who may need assistance  
or animals are left unattended in the vehicle,  
accidents and serious injuries can occur.  
●
Drive carefully when entering buildings, on  
››› page 187. The drive system is switched  
oꢀ. The indicator lamp next to the gear  
selector lights up red.  
ramps, driving over kerbs or ꢀxed markings,  
and on descents.  
●
Never leave children, people who may need  
3. On slopes, turn the steering wheel so that  
if the parked vehicle were to start moving, it  
would steer toward the kerb.  
assistance or animals unattended in the ve-  
hicle. They could operate the gear selector  
and release the electronic parking brake. The  
vehicle could be set in motion.  
4. Remove your foot from the brake pedal.  
●
Never leave children, people who may need  
5. Exit the vehicle ››› . Watch out for other  
road users!  
assistance, or animals in the vehicle. De-  
pending on the season, very high or low tem-  
peratures can be reached inside a closed ve-  
hicle.  
6. Take all vehicle keys with you and lock it.  
To avoid damage or hazardous situations, al-  
ways park the vehicle on a suitable parking sur-  
●
Always take all vehicle keys with you when  
leaving the vehicle.  
face ›››  
.
186  
Electronicparkingbrake
When the ability to roll is activated, a message  
is permanently displayed on the instrument  
cluster display. If necessary, an audio warning  
sounds.  
Switching oꢂ  
Electronic parking brake  
●
Depress the brake pedal and select position  
D, B, R or N on the gear selector.  
Using the electronic parking brake  
●
The control lamp on the instrument clus-  
Deactivate the rolling:  
ter goes out.  
●
Press the button ››› Fig. 141. The elec-  
tronic parking brake is activated.  
Automatic application when leaving the ve-  
hicle improperly  
●
OR: switch oꢀ the ignition by pressing the  
ignition/start button.  
The electronic parking brake can be applied  
automatically if the system detects that the  
Emergency brake function  
vehicle has been left improperly ››› . The  
electronic parking brake also holds the vehicle  
in the neutral N position.  
Only use the emergency brake function in an  
emergency, if the vehicle cannot be stopped  
by pressing the brake pedal ›››  
Press and hold the button. The vehicle will  
!
Fig. 141 On the gear selector: electronic  
parking brake button.  
Activating the vehicle's ability to roll  
●
brake sharply. At the same time, an acoustic  
warning can be heard.  
If you do not want the electronic parking brake  
to be applied automatically, e.g. in a car wash  
or if you want to push or tow the vehicle,  
the vehicle’s ability to roll can be maintained  
Connecting  
●
While the vehicle is stationary, press the but-  
WARNING  
ton ››› Fig. 141.  
›››  
.
If the vehicle is left improperly, it could roll  
away. This could lead to accidents, serious  
injury and property damage.  
●
OR: when the ignition is switched oꢀ, the  
With the vehicle stationary, press down the  
brake pedal and select the N position on the  
gear selector.  
electronic parking brake is applied automati-  
cally.  
●
When parking the vehicle, always perform  
When the electronic parking brake is ap-  
plied, the control lamp on the instrument  
cluster next to the gear selector lights up  
red.  
●
Conꢁrm the message Activate rolling in the  
the appropriate operations in the indicated  
infotainment system.  
order ››› page 186, Parking.  
●
OR: open the vehicle settings in the infotain-  
ment system > Assistants > Park assist >  
Brakes and activate the function.  
●
Before leaving the vehicle, make sure that  
the electronic parking brake is applied and  
that the control lamp on the instrument  
cluster, next to the gear selector, is lit up red.  
187  
Parking and manoeuvring  
The electronic parking brake makes noises  
The electronic parking brake does not  
disconnect completely  
WARNING  
●
When the electronic parking brake is applied  
The improper use of the electronic parking  
brake can cause accidents and serious injury.  
and released, noises may be heard.  
The control lamp next to the gear selector  
ꢂashes red. The vehicle is in motion. The con-  
trol lamp also lights up on the instrument  
cluster screen.  
●
The system performs automatic and audi-  
●
Never use the electronic parking brake to  
ble checks sporadically in the parked vehicle  
if some time elapses without the electronic  
parking brake being used.  
stop the vehicle, unless it is an emergency.  
The braking distance is considerably longer.  
Always use the brake pedal.  
There is a fault in the system.  
●
Visit a CUPRA dealer or other specialist  
Auto-Hold function  
NOTICE  
workshop.  
Do not allow the electronic parking brake to  
apply automatically in an automatic car wash  
facility. This can cause damage to the vehi-  
cle.  
The Auto-Hold function holds the vehicle at a  
standstill and prevents it from moving without  
it being necessary to depress the brake pedal.  
/
There is a defect in the electronic  
parking brake  
The central warning lamp lights up yellow. The  
symbol is displayed on the instrument clus-  
ter screen with a message.  
●
Activate the vehicle’s ability to roll.  
Requirements  
●
●
The driver's door is closed.  
Visit a CUPRA dealer or other specialist work-  
shop.  
Troubleshooting  
The drive system is connected.  
When the N position is selected, the Auto-  
Hold function is not activated or, if activated,  
it deactivates. Therefore, the vehicle will not be  
The holding force in the current situa-  
tion is too small  
The electronic parking brake does not re-  
lease  
safely held ›››  
.
The control lamp next to the gear selector  
ꢂashes red. The vehicle is stopped. A message  
is also displayed in this regard on the instru-  
ment cluster screen.  
The charging connector is plugged in.  
Connecting  
OR: the 12-volt battery is discharged.  
●
●
Press  
> Assistants > Smart Assistants  
●
Use the jump start ››› page 271.  
It is not possible to park the vehicle safely on  
an uphill slope.  
Activate the Auto-Hold function.  
When the Auto-Hold function is  
switched on, the control lamp on the in-  
strument cluster lights up grey.  
●
Park the vehicle somewhere else, or on a  
level surface.  
Just because the Auto-Hold function is  
switched on does not mean that it holds the  
vehicle at a standstill ›››  
.
188  
General informationonparkingsystems  
WARNING  
The Auto-Hold function will be switched on  
the next time the drive system is switched on.  
General information on  
parking systems  
The smart technology of the Auto-Hold can-  
not overcome the limits imposed by the laws  
of physics and it only operates within the lim-  
its of the system. Never allow the enhanced  
convenience of the Auto-Hold function to in-  
duce you to take any risk that compromises  
safety.  
Keeping the vehicle stopped with the Auto-  
Hold function  
Automatic brake operation  
●
Make sure that the Auto-Hold function is  
The automatic braking feature of a parking sys-  
tem is used to reduce the danger of collision  
when an obstacle is detected during a parking  
manoeuvre.  
switched on.  
●
Stop the vehicle with the brake ››› page 186.  
●
If the vehicle has to be immobilised, make  
When the Auto-Hold function is ac-  
tive, the control lamp on the instrument  
cluster lights up green.  
sure that the control lamp is lit up in  
green or in red on the instrument cluster.  
If the control lamp is green, the Auto-Hold  
function holds the vehicle; when it is red, the  
electronic parking brake holds the vehicle.  
Braking functions  
Depending on the equipment, the following  
systems are available:  
The vehicle is held at a standstill. The brake  
pedal can be released ›››  
When the vehicle starts to move or the re-  
quirements of the Auto-Hold function are not  
met, the vehicle is no longer held.  
●
Never leave the vehicle with the drive sys-  
●
Park assist plus manoeuvre braking function  
tem on and the Auto-Hold function activated  
for any reason.  
››› page 191.  
●
Rear cross traꢀic alert emergency brake  
●
The Auto-Hold cannot always keep the ve-  
function ››› page 209.  
hicle stopped on an uphill, or brake it suꢂi-  
ciently on a downhill, e.g. on slippery or icy  
surfaces.  
Switching oꢂ  
●
Automatic parking assistant emergency  
●
Switch oꢀ the Auto-Hold function in the info-  
brake function ››› page 194.  
tainment system:  
> Assistants > Smart As-  
sistants ››› page 35.  
Requirements  
NOTICE  
The Auto-Hold function can only be switched  
●
The vehicle is moving between approx.  
Always deactivate the Auto-Hold function  
before entering an automatic car wash fa-  
cility. Failure to do so could cause damage  
due to the automatic application of the park-  
ing brake.  
oꢀ when the brake is depressed ›››  
.
3 km/h and 8 km/h when manoeuvring  
●
A parking system is switched on.  
The brakes are not automatically operated  
when park assist is switched on automatically  
while moving forward.  
189  
Parking and manoeuvring  
●
Some noise sources, such as a jackhammer  
What happens in the event of automatic  
braking?  
●
Pay attention and do not rely solely on park  
or a cobblestone surface can interfere with the  
ultrasound signal.  
assist systems.  
●
Always be prepared to brake and control  
If there is an obstacle, the system brakes the  
vehicle to a standstill and keeps it stationary for  
approx. 2 seconds. Press the brake!  
●
The vehicle has some type of damage in the  
the steering yourself.  
sensor or camera area, e.g. due to a parking  
impact.  
●
Do not take any risks that compromise  
safety.  
●
The sensor detection zone or ꢁeld of view of  
●
Activate  
Act in accordance with the warnings and  
the camera are blocked by an accessory, e.g. a  
bike rack.  
driving recommendations of the parking sys-  
tems.  
●
Automatic braking is activated when the  
driver switches a parking system on.  
●
Changes have been made to the paintwork  
or structural modiꢁcations in the sensor or  
camera area, e.g. at the front of the vehicle or  
to the running gear.  
Deactivating  
Note  
●
The automatic brake operation function de-  
●
Switch oꢂ the parking system if the auto-  
matic brakes operate excessively, e.g. when  
driving oꢂ-road.  
activates when a park assist system is switched  
oꢀ.  
Also take into account the messages displayed  
on the infotainment system screen.  
●
●
After the park assist’s manoeuvre braking  
OR: to temporarily deactivate the manoeu-  
function has braked the vehicle, driving in  
the same direction for 5 metres is deactiva-  
ted, and becomes active again after changing  
gear or changing the position of the gear se-  
lector.  
vre braking function, press the function  
button on the park assist screen and change  
the setting.  
Sensor or camera without visibility, or the  
parking system has been switched oꢂ  
If a sensor fails, that sensor zone is perma-  
nently switched oꢀ. The aꢀected sensor zone  
may be displayed on the infotainment system  
with a symbol and a greyed-out graphic  
segment. If necessary, the parking system  
switches oꢀ the aꢀected zone.  
WARNING  
Never allow the automatic braking opera-  
tions of park assist systems to lead you to  
take any risk that compromises safety. In cer-  
tain situations, the automatic braking inter-  
vention may only work in a limited way or  
not work at all. Collisions with obstacles can  
injure people and damage the vehicle. The  
system is not a replacement for driver aware-  
ness.  
Troubleshooting  
The parking system behaves diꢂerently than  
expected  
If the park assist is not working properly, a con-  
tinuous audio signal sounds for a few seconds  
when it is switched on. If applicable, a message  
to this eꢀect is displayed on the instrument  
cluster screen  
There can be several causes:  
●
●
The system requirements are not met.  
The sensors or the camera are dirty or have  
ice on them ››› page 315.  
●
The camera lens is not clean and the camera  
image is not clear ››› page 315.  
190  
ParkingaidPlus
●
Check if one of the causes indicated above  
When moving close to an obstacle, it is possi-  
ble to know if the obstacle is in front of the  
vehicle or behind it according to the sound  
frequency.  
If a rear sensor is faulty, only the obstacles in  
the front area are detected. If a front sensor is  
faulty, only the obstacles in the rear area are  
displayed. The symbol is displayed.  
has occurred.  
●
Once the source of the problem has been  
eliminated, the system may be reconnected.  
We recommend taking the vehicle to a special-  
ised workshop to have the fault repaired.  
●
If the problem persists, consult a specialised  
The approximate measurement range of the  
sensors is:  
workshop.  
A
B
C
D
1.20 m  
0.90 m  
1.60 m  
0.90 m  
Parking assist settings  
Parking aid Plus  
The indications and audible signals are set in  
the Infotainment system: function button  
Description  
> Assistants > Parking >  
> Set-  
tings.  
●
●
Automatic activation:On/oꢀ  
Front volume:Volume in the front and  
As you approach the obstacle, the frequency  
of the audible signals will increase. The signal  
will sound continuously at around 0.30 m: Stop  
the vehicle!  
rear area.  
●
●
Rear volume:Volume in the rear area.  
Reduce volume:When the parking aid is  
If the separation is maintained, the volume of  
the warning starts to decrease after about 2.5  
seconds and for the next 2.5 seconds it is fades  
away until disappearing completely.  
switched on, the volume of the audio source  
will be reduced, depending on the selected  
option.  
Fig. 142 Parking aid view on the  
Infotainment system display.  
Error messages  
If a an error or fault message is displayed on  
the instrument cluster in Park Assist, there is a  
fault.  
Parking aid plus assists the driver by giving  
visual and audio warnings about obstacles de-  
tected in front of and behind the vehicle.  
If the fault doesn't disappear before discon-  
necting the ignition, it will not be indicated  
next time the parking aid is connected.  
The bumpers are ꢁtted with sensors. When  
an obstacle is detected, it is indicated by au-  
dible signals and in the Infotainment system  
››› Fig. 142.  
191  
Parking and manoeuvring  
●
If the system warns you of the proximity of  
WARNING  
Note  
a low obstacle, please note that after being  
detected by the system, the obstacle in ques-  
tion may disappear from the measurement  
sensors as the vehicle moves closer, and the  
system will no longer warn of its presence. In  
certain circumstances, objects such as high  
kerbs that could damage the underside of  
the vehicle are not detected.  
●
Always pay attention, by looking directly,  
●
The display on the Infotainment system  
to traꢂic and the area around the vehicle.  
Assistance systems are not a replacement for  
driver awareness. Responsibility always lies  
with the driver.  
screen shows a slight time delay.  
●
In certain situations, the system can give a  
warning even though there is no obstacle in  
the detected area:  
●
The sensors have blind spots in which ob-  
–
Rough or cobbled surfaces or surfaces  
stacles and people are not detected. Pay spe-  
cial attention to children and animals.  
with long grass.  
●
If the parking distance warning system is  
–
External ultrasound sources, such as  
●
Always keep visual control of the surround-  
ignored, the vehicle could suꢂer considera-  
ble damage.  
other vehicles equipped with ultrasound  
systems.  
ings: use the mirrors for additional help.  
●
Damage to the radiator grille, bumper,  
–
Heavy rain or snow, hail or dense exhaust  
wheel arch and vehicle underbody can mod-  
ify the orientation of the sensors. This can  
aꢂect the parking aid function.  
gases.  
NOTICE  
–
If the number plate is not properly se-  
Park assist plus functions can be aꢂected by  
various factors which may cause damage:  
cured to the surface of the bumper.  
Have the function checked by a specialised  
workshop.  
–
Gradient changes.  
●
Under certain circumstances, the system  
●
In order to guarantee good operation, keep  
does not detect or display certain objects:  
●
A number plate or number plate holder  
the sensors clean, free of snow and ice, and  
do not cover them with stickers or other ob-  
jects.  
with dimensions that exceed the space for  
the number plate, or a cured or deformed  
number plate can cause false detections or a  
loss of visibility for the sensors.  
–
Chains, trailer draw bars, bars, fences,  
posts and thin trees.  
–
Objects that are located above the sen-  
●
If you use high-pressure or vapour equip-  
sors, such as protrusions in a wall.  
ment for cleaning, do not apply it directly,  
unless you do so very brieꢁy, and always keep  
a distance of more than 10 cm away.  
–
Objects with certain surfaces or struc-  
tures, such as wire mesh fences or powder  
snow.  
●
Fitting certain accessories to the front of  
●
Certain surfaces of objects and garments  
the vehicle, such as a plate holder with ad-  
vertising, may interfere with the operation of  
the Park Assist.  
do not reꢁect the ultrasound sensors' signals.  
The system cannot detect these objects or  
people wearing such clothes correctly.  
●
We recommend that you practice parking  
●
Sensor signals may be aꢂected by external  
in an area without traꢂic.  
sound sources. This may prevent them from  
detecting people or objects.  
●
The volume and tone of the signals and  
indications can be changed.  
192  
ParkingaidPlus
●
●
Switch the ignition on.  
In the infotainment system select  
Change from reduced view to full view  
Operating Park Assist Plus  
> As-  
●
Engage the reverse gear if your vehicle is  
equipped with a reversing camera.  
Switching on and oꢂ manually  
sistants > Parking > Parking aid.  
●
(
aid).  
Press button in the infotainment system  
> Assistants > Parking assist > Parking  
●
Check the Automatic activationbox.  
●
●
Press the car icon on the reduced view  
If activated automatically, an audible sound  
warning will only be given when obstacles in  
front are at a distance of less than 50 cm. ap-  
prox.  
OR: if the vehicle moves back a certain dis-  
tance (between approx. 10 and 20 cm approx  
depending on whether or not an obstacle is  
detected).  
Automatic activation  
●
●
Select reverse gear.  
If it is switched oꢀ using the button in the  
infotainment system, one of the following ac-  
tions must be taken for it to reactivate auto-  
matically:  
Switch to the reverse assist image (Rear View  
Camera “RVC”)  
OR: if you drive forward at a speed of less  
than 15 km/h (9 mph) and you encounter an  
obstacle, it is detected when it is optically ap-  
prox. less than 95 cm. away, or acoustically ap-  
prox. 50 cm. away. If the automatic connection  
is activated, a reduced display is shown.  
●
●
Select reverse gear.  
●
●
Switch oꢀ the ignition and switch it on again.  
OR: press the RVC button on the Infotain-  
ment System screen 1)  
EITHER: drive forward at over approx.  
.
15 km/h (9 mph).  
●
OR: if the vehicle moves back a certain dis-  
A short conꢁrmation signal will be heard and  
the button symbol will light up when the sys-  
tem is switched on.  
●
OR: switch the automatic activation on and  
tance (between approx. 10 and 20 cm approx  
depending on whether or not an obstacle is  
detected).  
oꢀ in the Infotainment system.  
Automatic disconnection  
When the Plus Parking Aid connects auto-  
matically, a diagram of the vehicle and the seg-  
ments will appear on screen. This function will  
be available unless the user has deactivated it.  
NOTICE  
●
Drive forward at 15 km/h (9 mph) or faster.  
Park assist plus only connects automatically  
when driving very slowly. If driving style is not  
adapted to the circumstances, an accident  
and serious injury or damage may be caused.  
Temporary sound suppression  
It only operates every time the speed drops  
below 15 km/h (9 mph) for the ꢁrst time.  
●
Press the  
function button on the infotain-  
ment screen.  
Automatic activation of park assist can be  
switched on and oꢀ in the infotainment sys-  
tem:  
●
OR: activate the electronic parking brake.  
1)  
The RVC button will only be displayed when reverse gear is engaged.  
193  
Parking and manoeuvring  
When the penultimate segment is displayed,  
the vehicle has reached the collision zone. In  
the collision zone, the obstacles are represen-  
ted in red (including those out of the path).  
In vehicles with an automatic parking system  
and factory infotainment system, the front,  
rear and side areas are represented, and the  
position of obstacles is shown relative to the  
vehicle.  
Visual indication segments  
Stop the vehicle! ›››  
in Description on  
page 192  
The automatic parking system is subject to  
certain limitations inherent to the system  
and its use requires special attention by the  
Automatic parking system  
driver ›››  
.
Introduction  
WARNING  
The automatic parking system is an additional  
function of ParkPilot ››› page 191 and helps  
the driver ꢁnd a suitable parking space from  
among the following types:  
The technology used in the automatic park-  
ing system has a series of limitations inherent  
in the actual system and in the use of ultra-  
sonic sensors. The use of Park Assist should  
never tempt you to take any risk that may  
compromise safety. The system is not a re-  
placement for driver awareness.  
Fig. 143 Parking aid view on the  
Infotainment system display.  
The optical indication of the segments works  
as follows:  
●
park driving in reverse in suitable perpendic-  
ular and parallel spaces,  
●
Grey segments: the obstacle is more than  
●
park driving forwards in suitable perpendicu-  
approx. 30 cm away from the path or in the  
direction opposite to travel. They are also dis-  
played when the electronic parking brake is ac-  
tivated.  
●
Any accidental movement of the vehicle  
lar spaces,  
could result in serious injury.  
●
exit a parking space driving forwards from a  
●
Adapt your speed and driving style at all  
parallel space,  
times to suit visibility, weather, road and traf-  
ꢀc conditions.  
●
park in a suitable space driving forward on  
●
Yellow segments: the obstacles lie on the  
angle partially entering into the selected park-  
ing space. The system will centre the vehicle in  
the parking space,  
vehicle’s path and are at a distance of less than  
approx. 30 cm away.  
●
Certain surfaces of objects and garments  
do not reꢁect the ultrasound sensors' sig-  
nals. The system cannot detect, at least cor-  
rectly, these objects or people wearing such  
clothes.  
●
Red segments: obstacles are less than ap-  
●
ꢁnish reverse parking into a space in which  
prox. 30 cm away.  
you have attempted to park manually by parti-  
ally entering with the rear of the vehicle.  
A guiding track will indicate the anticipated for-  
ward or backward trajectory, depending on the  
gear that is engaged.  
●
Ultrasound sensor signals may be aꢂected  
by external sound sources. In certain circum-  
stances this may prevent them from detect-  
ing people or objects.  
If an obstacle is located in the vehicle’s way,  
the corresponding audible warning will sound.  
194  
Automaticparkingsystem
●
The ultrasound sensors may have blind  
are not damaged while parking. If necessary,  
opportunely interrupt the parking manoeu-  
vre to avoid damaging the vehicle.  
Note  
spots in which obstacles and people are not  
detected.  
●
In order to guarantee good system oper-  
ation, keep the ultrasound sensors of the  
bumper clean, free of snow or ice, and do not  
cover them with adhesives or other objects.  
●
●
Monitor the area around the vehicle at all  
The ultrasound sensors on the bumper may  
times, since the ultrasound sensors do not  
detect small children, animals or certain ob-  
jects in all situations.  
be damaged or shifted in the event of a colli-  
sion, for example, when entering or exiting a  
parking space.  
●
Certain sources of noise, such as rough as-  
phalt or paving stones and the noise of other  
vehicles can induce the automatic parking  
system or ParkPilot to give erroneous warn-  
ings. The presence of metal objects can also  
aꢂect the manoeuvre.  
●
If you use high-pressure or vapour equip-  
ment to clean the ultrasound sensors, do not  
apply it directly unless very brieꢁy and always  
from a distance of more than 10 cm.  
WARNING  
Quick turns of the steering wheel when park-  
ing or exiting a parking space with the au-  
tomatic parking system can cause serious in-  
jury.  
●
A registration plate or plate holder on the  
●
In order to become familiar with the system  
front with larger than the space for the reg-  
istration plate, or a registration plate that is  
curved or warped can cause:  
and its functions, CUPRA recommends that  
you practice operating the automatic park-  
ing system in an area where there is not too  
much traꢂic or in a car park.  
●
Do not hold the steering wheel during ma-  
noeuvres to park or exit a parking space un-  
til the system requests it. Doing so disables  
the system during the manoeuvre, resulting  
in the parking being cancelled.  
–
–
–
False detections.  
The sensors to lose visibility.  
Cancellation of the parking manoeuvre  
Description of the automatic park-  
ing system  
or defective parking.  
●
If one of the ultrasonic sensors is damaged,  
NOTICE  
the area corresponding to that group of sen-  
sors (front or rear) is deactivated and can-  
not be activated until the fault is corrected.  
However, you can still use the sensors of the  
other bumper as per usual. If there is a fault  
in the system, consult a specialist workshop.  
To do so, CUPRA recommends going to a  
specialised CUPRA dealer or any SEAT deal-  
ership.  
The components of the automatic parking sys-  
tem are the ultrasonic sensors located in the  
front and rear bumpers, the button to switch  
the system on and oꢀ and the messages on the  
infotainment system display.  
●
In certain circumstances, the ultrasonic  
sensors do not detect objects such as trailer  
tongues, bars, fences, posts or thin trees, or  
an open (or opening) rear lid, which could  
damage the vehicle.  
●
Retroꢀtting of certain accessories to the  
Prerequisites for parking  
vehicle, such as a bicycle rack, may interfere  
with the operation of the automatic parking  
system and cause damage.  
●
The traction control (TCS) must be switched  
on ››› page 154.  
●
The automatic parking system uses as a  
●
Speed when passing next to the parking  
reference parked vehicles, curbs and other  
objects. Make sure that the tyres and wheels  
space: do not exceed approx. 50 km/h  
(31 mph).  
195  
Parking and manoeuvring  
●
●
Keep a distance between 0.5 and 2.0 metres  
There is a fault in the system (the system is  
Selecting a parking type  
when driving past the parking space.  
temporarily unavailable).  
●
●
●
●
Space length (parallel parking): vehicle  
The TCS is disconnected.  
length + 1 meter.  
TCS or ESC intervene with regulation.  
A door or the luggage compartment is  
●
Space width (parking bay): vehicle width  
+ 1.1 meters.  
opened.  
●
The parking system encounters an unexpec-  
Requirements for leaving the parking space  
(only for parallel parking)  
ted obstacle.  
●
The parking system detects high rolling re-  
●
The traction control (TCS) must be switched  
sistance, e.g. if there is an obstacle on the  
ground (stone, bump, kerb, etc.).  
on ››› page 154.  
●
Space length: length of the vehicle  
Special characteristics  
+ 0.5 metres.  
The automatic parking system is subject to  
certain limitations inherent to the system. For  
example, it is therefore not possible to use it to  
enter or exit a parking space on sharp bends or  
on very steep hills.  
Prematurely stopping or automatically inter-  
rupting the manoeuvres for parking or exit-  
ing a parking space  
Fig. 144 On the infotainment system  
display: parking modes indication.  
Automatic parking includes the following 5  
types of parking:  
The automatic parking system interrupts the  
manoeuvres for parking or exiting a parking  
space in any of the following cases:  
After changing a wheel  
Reverse parallel parking.  
Reverse angle parking.  
Forward angle parking.  
If, after changing a wheel, the vehicle stops  
entering and exiting parking spaces correctly,  
the circumference of the new wheel may be  
diꢀerent and the system may need to adapt  
to it. The adaptation is automatic and takes  
●
Press button in the infotainment system,  
> Assistants > Parking > Automatic park-  
ing system.  
Reverse parallel parking without driving  
past ꢁrst: “Help me”.  
●
The driver takes control of the steering  
wheel.  
place during driving ›››  
in Introduction on  
Forward or reverse parking in a parking bay  
without driving past ꢁrst.  
●
The parking manoeuvre can involve up to 8  
page 194.  
movements.  
●
The parking manoeuvre does not end within  
6 minutes after activation of the automatic  
steering.  
196  
Automaticparkingsystem
Selecting a parking type after passing in  
front of the space  
Reverse parallel parking without driving past  
Parking with the automatic parking  
system  
ꢀrst (type  
)
After activating the automatic parking system  
and after detecting a parking space, the info-  
tainment system display proposes a type of  
parking. The automatic parking system selects  
the parking type automatically. The selected  
type is shown on the infotainment system dis-  
play is shown on the instrument panel display  
With this type of parking , press button  
so that the system completes the parking that  
has already been started. The system will only  
switch on if suꢀicient progress has been made  
with the manoeuvre (the side sensor must be  
able to detect the reference vehicle). If it is  
impossible to successfully complete the ma-  
noeuvre that has been started, the system it-  
self will drive out of the parking space before  
››› Fig. 144.  
●
The prerequisites for parking with the  
starting parking in a similar way to type  
.
automatic parking system must be met  
››› page 195.  
Special case of forward or reverse parking  
into a parking bay without driving past  
ꢀrst.  
●
Press the button in the infotainment sys-  
tem,  
> Assistants.  
●
When the system is switched on, the symbol  
on the infotainment system display is high-  
●
The prerequisites for parking with the  
automatic parking system must be met  
lighted. The selected type of parking is also  
displayed. You can change the type of parking  
on the infotainment system display.  
››› page 195.  
●
Move forward towards the parking space  
while paying attention to traꢀic and stop the  
vehicle with the front part partially inside the  
parking space.  
●
If there are more spaces available, another  
space can be selected by clicking on it on the  
infotainment system display.  
●
Press the button once in the infotainment  
●
Follow the instructions displayed on the info-  
system,  
> Assistants.  
tainment system display while paying attention  
to traꢀic and drive the vehicle past the parking  
space.  
●
When the system is switched on, the symbol  
on the infotainment system display is high-  
Fig. 145 On the Infotainment system  
lighted. The selected parking mode without a  
reduced view is also displayed.  
screen. : Finding a parking space  
:
Parallel parking position. : Perpendicular  
parking position.  
●
Let go of the steering wheel ›››  
in Intro-  
duction on page 194.  
197  
Parking and manoeuvring  
1
2
3
●
Your vehicle  
Once the manoeuvres have been comple-  
ted, this is indicated by an audio and visual  
warning in the infotainment system. At this  
point the vehicle will be parked and immobi-  
lised (gear P activated) and will turn oꢀ.  
Parking space detected  
Indication showing the proposed parking  
manoeuvre  
The prerequisites have to be met to park with  
the automatic parking system ››› page 195  
and the parking mode has to be selected  
››› page 196.  
Progress bars  
Fig. 147 On the Infotainment system  
Parking  
screen: parking space  
●
Look at the display on the infotainment sys-  
tem's screen to see if the space has been de-  
tected as “appropriate” and if the correct posi-  
Note  
If the parking space is displayed with arrows  
on its sides, this indicates that it is possi-  
ble to park in a diꢂerent way in the same  
space by pressing on the highlighted space  
tion for parking has been reached ››› Fig. 145  
or . Stop the vehicle and follow the in-  
structions shown on the infotainment screen.  
Fig. 146 On the infotainment system  
screen: progress bar  
●
Stop the vehicle, press the brake and, after a  
››› Fig. 147.  
4
short pause, press the Start  
button in the  
5
The progress bar  
on the infotainment sys-  
infotainment system.  
Note  
tem display shows the relative distance to be  
covered as a symbol. The more complete the  
progress bar, the shorter the distance to com-  
plete the parking manoeuvre.  
●
Let go of the steering wheel ›››  
in Intro-  
If the manoeuvre is terminated prematurely  
during parking, the result may not be the  
best.  
duction on page 194.  
●
Please note the following message:  
Parking the vehicle... Steering in-  
tervention active  
●
The automatic parking system will park au-  
tonomously by taking control of the steering  
wheel (transverse control of the vehicle) and  
control of the accelerator and brake pedals  
(longitudinal control of the vehicle).  
198  
Automatic ParkingSystemPluswithmemory function  
●
Let go of the steering wheel ›››  
in Intro-  
Leaving a parking space with the  
automatic parking system (only for  
parallel parking)  
Automatic Parking System  
Plus with memory func-  
tion  
duction on page 194. Please note the follow-  
ing message:  
Vehicle driving out of the park-  
ing space... Intervention in active  
steering.  
Introduction  
●
The automatic parking system will automati-  
cally perform the manoeuvres for getting the  
vehicle out of the parking space by taking con-  
trol of the steering wheel (transverse control  
of the vehicle) and control of the accelerator  
and brake pedals (longitudinal control of the  
vehicle).  
The Automatic Parking System Plus with mem-  
ory function oꢀers assistance when parking in  
frequently used parking spaces. The vehicle  
automatically manoeuvres from a previously  
saved route to the parking space.  
The availability of the Automatic Parking Sys-  
tem Plus with memory function depends on  
the vehicle’s equipment.  
Fig. 148 On the infotainment system  
display: leaving a parallel parking space.  
●
The vehicle can be removed from the park-  
ing space when a message to this eꢀect is dis-  
played in the infotainment system (Vehicle  
out of the parking space. Take con-  
trol of the vehicle) and, if necessary, an  
audio signal sounds. Take control of the steer-  
ing wheel while maintaining the steering angle  
set by the automatic parking system.  
1
Your vehicle  
How it works  
2
Message giving the proposed manoeuvre  
to exit the parking space  
The Automatic Parking System Plus with mem-  
ory function is an extension of the Automatic  
Parking System.  
Leaving a parking space (parallel parking)  
The necessary conditions to exit a park-  
ing space with Park Assist have to be met  
This parking system uses the front camera to  
detect the surrounding area and saves the  
route to the parking space, with a maximum  
distance of 50m. Once the parking process is  
saved in the Assistant, the vehicle is able to  
reach the parking space automatically.  
●
Paying attention to the traꢀic and surround-  
ings, exit the parking space.  
››› page 195.  
●
Press the in the infotainment system:  
> Assistants. When the system is switched on,  
the symbol on the infotainment system dis-  
play is highlighted.  
The driver must monitor the area around the  
●
Turn on the corresponding turn signal to-  
vehicle at all times ›››  
Automatic braking may occur if there are ob-  
stacles in the vehicle’s path or if a dangerous  
situation arises.  
.
wards the road you will enter when exiting the  
parking space, and press the brake pedal.  
●
3
Press the Start key in the infotainmnent  
system.  
199  
Parking and manoeuvring  
Prerequisites  
●
self.  
If necessary, operate the turn signals your-  
WARNING  
●
GPS coordinates of the vehicle's position are  
The parking process cannot be carried out  
correctly if the roadway is slippery; the vehi-  
cle may skid. This can cause accidents and  
damage to the vehicle.  
●
Use the brake pedal to slow down or even  
available.  
stop the vehicle in dangerous situations.  
●
Suꢀicient space for manoeuvring. The vehi-  
cle may have to travel a few meters to reach  
the programmed parking route.  
WARNING  
●
Do not use the Parking Assist in winter road  
conditions.  
The system is only capable of a limited re-  
sponse to sudden changes in external condi-  
tions. Collisions with other road users may  
occur.  
WARNING  
The smart technology used in parking sys-  
tems cannot ignore the laws of physics and  
only works within the limits of the system.  
Failure to take this into account may result  
in accidents and serious injuries, as well as  
damage to the vehicle.  
Programming the parking process  
●
Do not use the parking system when traꢂic  
Find a suitable parking space  
speeds are in excess of 80 km/h (50 mph).  
●
The parking space is clearly visible and un-  
●
Always keep a safety distance of at least  
obstructed. Underground car parks and multi-  
storey car parks are not suitable.  
one vehicle length at junctions.  
●
Pay attention to the parking process and  
●
Do not perform automatic parking from  
●
There is good visibility, i.e. no heavy rain, fog  
the traꢂic around you. Look in the direction  
that the vehicle is parking.  
the other side of the road or across several  
lanes.  
or darkness.  
Programming of the parking process may be  
limited if the parking space is unsuitable.  
●
Do not use the Automatic Parking System  
Plus with memory function in parking spaces  
where there are no deꢀned boundaries, e.g.  
near the edge of lakes or rivers or near un-  
fenced slopes.  
WARNING  
The vehicle may occupy/invade the path of  
oncoming traꢂic.  
Program the process for reaching a parking  
space  
●
Pay attention to the parking process and  
the traꢂic around you.  
1. Drive to the parking space as normal.  
2. Stop the vehicle safely.  
WARNING  
●
Keep the vehicle under control and use the  
brake if necessary.  
The driver is responsible for automatic park-  
ing at all times. There is a risk of accidents.  
3. Save the parking process as a parking  
space in the infotainment system.  
●
Only park the vehicle if you have a valid  
Follow the indications below to get the best  
possible result when parking.  
driver’s license.  
●
Follow the traꢂic regulations of the country  
you are in.  
●
Do not leave the driver’s seat at any point  
during the parking manoeuvre.  
200  
Automatic ParkingSystemPluswithmemory function  
Note  
●
Carry out the parking process as slowly as  
possible.  
To replace the GPS coordinates with a name  
for the parking space, edit the space in the  
vehicle’s parking system.  
●
Avoid adjusting the trajectory of the vehi-  
cle during the last few meters to the parking  
space.  
●
Do not turn the steering wheel to its end  
Reprogramming the parking process of a  
saved parking space  
stop, move it too quickly or change direction  
many times while driving.  
If you want to reprogram a parking process,  
e.g. to improve the ꢁnal result or to reach  
the parking space from another location, you  
must ꢁrst delete the parking space saved in the  
menu.  
Variant 1: saving a parking space in the Park-  
ing system menu with memory function  
1. Press the key  
tem, > Assistants > Park Assist  
with memory function.  
in the infotainment sys-  
1. Delete that parking space stored in the In-  
fotainment system.  
2. Click on the icon  
.
2. Reprogram the parking process in its en-  
tirety.  
3. Press the +icon.  
4. Select the function button, assign the sym-  
Note  
1
bol you want (››› Fig. 149 ) and conꢁrm  
it.  
When deleting a stored parking space, the  
entry and exit processes for that parking  
space are always deleted.  
You have saved a new parking space in the  
menu.  
Variant 2: saving a parking space in the de-  
parture menu  
When you leave the vehicle, the departure  
menu is displayed in the infotainment system.  
●
Press the icon  
Save parking manoeu-  
vre.  
The parking process is saved as a parking  
space with GPS coordinates.  
201  
Parking and manoeuvring  
View and edit parking spaces  
Fig. 149 Schematic representation: Parking  
system menu with memory function.  
1
Saved parking spaces.  
You can edit any of the saved parking  
spaces.  
2
3
Add the last parking process  
Edit saved parking spaces.  
Start the parking process.  
2. To rename a parking space or assign a dif-  
ferent symbol to it, press icon  
parking space.  
for that  
4
Open the menu  
Either: to sort the parking spaces, press  
and hold your ꢁnger on the function but-  
ton of any of the parking spaces and move  
it to its new position.  
All parking processes are displayed as favour-  
ites in the menu of the automatic parking sys-  
tem with memory function.  
Fig. 150 Infotainment system: parking  
spaces without navigation.  
1. In the infotainment system, press  
Parking assistants > Park As-  
>
Or: to delete a parking space, press on the  
icon for that space.  
sist with memory function  
To delete all parking spaces, press of all  
parking spaces.  
1
2
3
Parking space not available.  
Parking space available.  
Edit, sort or delete parking spaces  
3
Automatic parking process selected.  
1. Press ››› Fig. 149  
.
Saved parking space status  
202  
Automatic ParkingSystemPluswithmemory function  
1. Stop the vehicle and hold it stationary with  
Variant 1: Automatic parking system menu  
with memory function  
the brake pedal.  
2. Press the Startbutton in the message.  
1. Stop the vehicle near the parking space  
and hold it stationary with the brake pedal.  
3. Let go of the steering wheel and take your  
foot oꢀ the brake pedal.  
2. If necessary, click on the parking space  
available icon in the Parking System menu  
4. Observe the images in the infotainment  
system.  
1
››› Fig. 149 . The function button will be  
displayed in blue.  
The system will start the parking process.  
Fig. 151 Infotainment system: parking  
space with guided route for the navigation  
system (depending on country and vehicle  
equipment).  
4
3. Press the Startbutton ››› Fig. 149  
.
5. Follow the instructions for variant 1 from  
step 5 onwards.  
4. Let go of the steering wheel and take your  
foot oꢀ the brake pedal.  
WARNING  
The system will start the parking process.  
Sudden steering wheel movements can  
cause serious injury.  
5. Always wait for the Parking system to ꢁn-  
ish turning the steering wheel at the end  
of the parking process for optimal results  
Driving to and from a parking  
space  
●
Do not grab the steering wheel during the  
›››  
.
manoeuvre, unless the system asks you to do  
so.  
When approaching a saved parking space, the  
System oꢀers a parking process on the Info-  
tainment system display.  
At the end of the parking process, an audi-  
ble signal will sound and a message to this  
eꢀect will be displayed on the infotainment  
system.  
●
If a dangerous situation arises, grab the  
steering wheel.  
●
Stop the vehicle as close as possible to the  
stored route, a maximum of one metre away.  
The electronic parking brake will be ap-  
plied.  
Navigate to a parking space as a  
destination  
●
Always approach the initial position of the  
parking process from the same direction.  
6. Park the vehicle.  
Which parking spaces can be used as navi-  
gation destinations?  
Note  
Variant 2: Navigation in the infotainment  
system  
Impediments may occur if visibility is very  
poor, e.g. in the dark, when parking and exit-  
ing a parking space.  
Saved parking spaces with a navigation symbol  
Once you reach the destination, a message will  
be displayed on the infotainment system.  
››› Fig. 151 can be transferred to the naviga-  
tion system as destinations. This function de-  
pends on the country and vehicle equipment.  
203  
Parking and manoeuvring  
Start the guided route  
Reverse assist modes  
WARNING  
1. To select a destination, press on a button  
Depending on the equipment, the following  
modes are available:  
●
The reverse assist does not make it possi-  
with a navigation symbol  
system menu.  
in the parking  
ble to precisely calculate the distance from  
obstacles and nor can it overcome the sys-  
tem's own limits, hence its negligent use may  
cause serious accidents and injuries if used  
without due care. The driver should be aware  
of his/her surroundings at all times to ensure  
safe driving.  
●
Angle parking: reverse parking perpendicu-  
2. Conꢁrm the message in the infotainment  
system.  
lar to the road.  
●
Cross traꢂic: monitors cross traꢀic.  
The guided route to that destination will  
begin and the Parking System menu will  
close.  
Requirements  
●
The camera lens expands and distorts the  
To park with reverse assist, the following re-  
quirements must be met:  
Or: follow the directions to exit a parking  
space with the parking system.  
ꢀeld of view and displays the objects on the  
screen in a way that is diꢂerent from reality.  
Distance perception is also distorted.  
●
Do not exceed a speed of approx. 15 km/h  
3. Once the vehicle has arrived at the desti-  
nation, read the message on the infotain-  
ment system.  
●
Due to the screen resolution or light con-  
(9 mph).  
ditions, some items may be blurry or not dis-  
played at all. Take care with thin posts, fen-  
ces, railings or trees that might not be seen  
on the screen and could damage the vehicle.  
●
Parking space width: vehicle width + 0.15 m  
(without counting the mirrors).  
The parking system with memory function  
is ready to automatically park the vehicle.  
To display a real image, the following require-  
ments must be met:  
●
The reverse assist has blind spots where  
it cannot see people or objects. Monitor the  
vehicle's surrounding area at all times.  
Reverse Assist (Rear View  
Camera)  
●
The luggage compartment rear door is  
closed.  
●
The system is not a replacement for driver  
●
●
awareness. Supervise the parking manoeu-  
vre and the vehicle's surrounding area at all  
times.  
The surroundings are on a ꢂat surface.  
Introduction  
The vehicle should not be loaded very heav-  
ily at the rear.  
A camera on the rear bumper aids the  
driver when reverse parking or manoeuvring  
››› page 159.  
●
Do not be distracted from the traꢂic by  
looking at the screen.  
●
The images are only two-dimensional. Pro-  
truding objects or holes in the road, for ex-  
ample, are more diꢂicult to detect or may not  
be seen at all.  
The camera image is viewed together with ori-  
entation lines projected on the Infotainment  
system screen. Part of the bumper can be seen  
at the bottom, which can be used by the driver  
as a reference point.  
204  
ReverseAssist(RearViewCamera)  
Disconnect the reverse assist  
Yellow lines: vehicle path depending on the  
steering angle.  
●
Vehicle load modiꢀes the representation of  
the guide lines. The width represented by the  
lines decreases with vehicle load. Pay special  
attention to the surroundings when the in-  
side of the vehicle of the luggage compart-  
ment are loaded.  
●
Drive forward at a speed of at least 15 km/h  
(9 mph).  
Cross traꢂic  
This view helps to monitor traꢀic behind the  
vehicle and can be used, for example, when  
exiting garages or narrow exits.  
Shown on the display  
●
In the following situations, objects or other  
The system’s functions and representations  
may vary depending on the equipment.  
vehicles appear to be further away or closer  
than they actually are. Pay special attention:  
Angle parking  
–
If moving from a ꢁat surface to a slope  
Reverse assist functions and symbols  
and vice-versa.  
When the reverse assist is connected, you can  
make adjustments using the function buttons.  
Some adjustments are equipment-dependent.  
–
–
If the vehicle is heavily loaded.  
When the vehicle approaches objects  
that are not on the ground surface or that  
protrude from it. These objects may be  
outside the camera angle when reversing.  
Exit the current display  
Switch to angle parking ››› page 205  
Switch to cross traꢀic  
Note  
●
It is important to take great care and pay  
special attention if the driver is not familiar  
with the system.  
Adjust the display: brightness, contrast  
and colour.  
●
The reverse assist reference lines disap-  
pear when the rear lid is open.  
Switch to park assist ››› page 191  
Display/hide the parking aid view  
Connecting and disconnecting  
Fig. 152 Display on the infotainment  
system screen: parking with the reverse  
assistant.  
Connect the reverse assist  
Guide lines  
●
●
Select reverse gear.  
Green horizontal lines: extension of the vehi-  
cle.  
OR: in the infotainment system select  
>
Key to the ››› Fig. 152:  
Finding a parking space  
Assistants > Park assist.  
205  
Parking and manoeuvring  
Go to the selected parking space  
●
The camera is dirty ››› page 315. In addi-  
Peripheral view system  
(Top View Camera)  
tion to dirt and snow, camera visibility can be  
reduced by detergent residue or any type of  
coating.  
Centre the vehicle inside the parking  
space  
1
2
3
4
Road  
●
The system requirements must be met  
Introduction  
Parking space  
››› page 204.  
●
Using 4 cameras, the system generates a rep-  
resentation that is shown on the infotainment  
system display. The cameras are located on the  
radiator grille, the exterior mirrors and the rear  
lid.  
Lateral boundary of the parking space  
Rear boundary of the parking space  
The camera is covered with water.  
●
The vehicle has some type of damage in the  
camera area, e.g. due to a parking impact.  
Parking  
●
The ꢁeld of view of the camera is blocked by  
●
In the infotainment system select  
tants > Parking aid before passing in front of  
the selected parking space.  
> Assis-  
an accessory, e.g. a bicycle carrier system.  
The functions and representations of the Area  
View system may vary depending on whether  
or not the vehicle has ParkPilot.  
●
Changes have been made to the paint in the  
camera area, or structural modiꢁcations have  
been made to a component such as the run-  
ning gear.  
●
With reverse assist connected and in working  
order, press the function button  
.
WARNING  
●
Stop the vehicle in front of the parking space  
The image from the cameras does not make  
it possible to calculate the distance to the  
obstacles (people, vehicles, etc.) precisely,  
so using them could cause serious accidents  
and injury.  
Camera with no visibility, fault message, the  
system disconnects  
2
››› Fig. 152  
●
that the yellow lines enter the parking space.  
The green and yellow lines must match the  
side boundary lines  
.
Reverse while turning the steering wheel so  
●
Clean the camera or remove possible adhe-  
sives or accessories from it ››› page 315.  
●
The camera lenses augment and distort the  
3
.
●
Check for visible damage.  
visual ꢀeld and the objects on the screen are  
seen diꢂerently and imprecisely.  
●
Stop the vehicle when the red line has  
4
reached the rear boundary  
.
Possible solution  
●
Certain objects may not be shown or may  
●
●
Temporarily disconnect the system.  
not be shown very clearly, for example, posts  
or thin rails, due to the screen resolution or if  
light conditions are insuꢂicient.  
Troubleshooting  
Check if one of the causes indicated above  
has occurred.  
The system behaves diꢂerently than expec-  
ted  
●
The cameras have blind spots in which ob-  
●
Once the source of the problem has been  
stacles and people are not registered.  
eliminated, the system may be reconnected.  
There can be several causes:  
●
If the system still behaves unpredictably,  
have it checked by a specialised workshop.  
206  
Peripheralviewsystem(TopViewCamera)  
NOTICE  
A
B
C
D
Front camera area  
Right camera area  
Rear camera area  
Left camera area  
WARNING  
●
The smart technology incorporated into the  
Top View Camera system cannot overcome  
the limits imposed by the laws of physics  
and it only works within the limits of the sys-  
tem. The greater convenience provided by  
the Area View system should never tempt  
you to take any risk that may compromise  
safety. If used negligently or involuntarily,  
it may cause serious accidents and injuries.  
The system is not a replacement for driver  
awareness.  
The camera images are only two-dimen-  
sional. Due to a lack of spatial depth, objects  
that jut out or holes on the road, for exam-  
ple, are more diꢂicult to detect or may not be  
seen at all.  
Function buttons:  
●
In certain circumstances, the camera does  
Exit the current display.  
not capture objects such as beams, fences,  
posts or thin trees, which could damage the  
vehicle.  
Adjust the display: bright, contrast and  
colour.  
●
The system displays the auxiliary lines and  
boxes regardless of the vehicle's environ-  
ment, no objects are detected. The driver is  
responsible for determining that the vehicle  
will ꢀt in the parking space.  
Depending on the equipment: connect-  
ing and disconnecting the ParkPilot  
sound.  
●
Adapt your speed and driving style to  
suit visibility, weather, road and traꢂic condi-  
tions.  
●
Do not be distracted from the traꢂic by  
The aerial view is generated by combining the  
looking at the screen.  
images from all the cameras ››› Fig. 153.  
The top view can be selected by pressing the  
vehicle inside the zone.  
Area View system  
●
Monitor the area around the vehicle at  
all times, since the cameras do not capture  
small children, animals and certain objects in  
all situations.  
The system will automatically switch between  
front and rear camera view according to the  
direction of travel.  
●
The system will probably be unable to rep-  
resent all areas clearly.  
A
Press on the diꢀerent areas ››› Fig. 153  
to  
D
of the top view or reduced top view to select  
and set the corresponding view, which will be  
highlighted in orange.  
Fig. 153 Display of the Area View system:  
aerial view.  
There are four diꢀerent views to choose from  
››› Fig. 153:  
207  
Parking and manoeuvring  
●
On moving from a horizontal plane to a  
Conditions necessary for the use of the Area  
View system  
Views of the peripheral vision sys-  
tem (modes)  
slope.  
●
On moving from a slope to a horizontal  
●
●
The doors and the rear lid must be closed.  
The image must be reliable and clear. For this  
The red lines are indicate a distance of approx.  
40 cm away from the vehicle.  
plane.  
●
●
If the vehicle is heavily loaded at the rear.  
If the vehicle approaches protruding objects.  
reason, for example, the camera lens must be  
clean.  
Aerial views (bird's eye view)  
These objects may be outside the cameras'  
angle of visibility.  
●
The area around the vehicle must be clearly  
Main mode:  
and totally visible.  
The vehicle and its immediate vicinity  
seen from above are shown. Depending  
on the equipment, the ParkPilot's path  
may also be displayed.  
●
The area for parking or manoeuvring should  
Note  
be a ꢂat surface.  
●
The vehicle should not be loaded very heav-  
To become familiar with the system and  
its functions, CUPRA recommends that you  
practice handling the Area View system in an  
area where there is not too much traꢂic or in  
a car park.  
ily at the rear.  
●
●
The driver must be used to the system.  
Front camera views (front view)  
There should be no damage to the vehicle in  
Cross traꢀic.  
the camera area. If the position or installation  
angle of the cameras have been changed, e.g.  
after a rear-end collision, the system should be  
checked by a specialised workshop.  
This visualization helps to monitor traꢀic  
to the left, front and right of the vehicle  
and can be used, for example, when ex-  
iting garages or narrow exits  
Connecting and disconnecting  
Connecting  
Angle parking.  
Special characteristics  
●
●
Select reverse gear.  
The area in front of the vehicle is shown.  
Orientation lines are shown to give guid-  
ance.  
The images on the area view system cameras  
are only two-dimensional. Due to a lack of spa-  
tial depth, it is diꢀicult or impossible to make  
out on-screen any holes there may be on the  
ground, objects jutting out from the ground or  
parts protruding from other vehicles.  
OR: in the infotainment system select  
>
Assistants > Parking assistant > Park assist.  
Switching oꢂ  
Side camera views (side view)  
●
Drive forward at a speed of at least 15 km/h  
Right and left sides.  
(9 mph).  
Situations in which the objects or other vehi-  
cles appear to be further away or closer than  
they really are:  
The areas located directly to the side of  
the vehicle seen from above are repre-  
sented in order to navigate possible ob-  
stacles more precisely.  
●
OR: press the function button.  
208  
Rearcrosstraꢂicalert(RCTA)  
In addition to the acoustic alarm, the driver is  
also informed by means of a visual signal on  
infotainment system display. This signal is dis-  
played in the form of a red strip at the back of  
the image of the vehicle on the infotainment  
system screen. This strip displays the side of  
the vehicle towards which traꢀic is approach-  
Rear camera views (rear view)  
Rear cross traꢂic alert  
(RCTA)  
Angle parking.  
The area behind the vehicle is shown.  
Auxiliary lines are shown to give guid-  
ance.  
How it works  
Cross traꢀic.  
ing in transverse direction1)  
.
This visualization helps to monitor traꢀic  
to the left, front and right of the vehicle  
and can be used, for example, when ex-  
iting garages or narrow exits.  
Automatic braking to reduce damages  
››› page 189.  
Connecting and disconnecting  
The rear cross traꢀic alert can be activated  
and deactivated by accessing the Assistants  
menu of the infotainment system. It can also  
be found in the Park Assist Settings menu.  
Fig. 154 Diagram of the parking assistant:  
detected area around the vehicle that is  
driving oꢀ.  
When the vehicle is restarted, the last adjust-  
ment in the system will remain active.  
Park Assist uses the radar sensors on the rear  
bumper ››› page 158 to monitor traꢀic cross-  
ing behind the vehicle as it reverses out of a  
parking bay, or as it is being manoeuvred, for  
example in very low visibility conditions.  
WARNING  
The smart technology incorporated into the  
rear cross traꢂic alert cannot overcome the  
limits imposed by the laws of physics; it only  
works within the limits of the system. The  
parking assistant function should not tempt  
you into taking any risks. The system is not a  
replacement for driver awareness.  
When the system detects a relevant vehicle on  
the road that is approaching the rear of the  
vehicle ››› Fig. 154, an acoustic alarm may  
sound if the relevance so requires it.  
1)  
It is only displayed if the vehicle is equipped with a parking system.  
209  
Parking and manoeuvring  
When you want to access the vehicle for the  
ꢁrst time, with the doors closed and locked,  
the function will be available 3 minutes after  
the ꢁrst opening of any of the doors. The func-  
tion will continue to be available as long as the  
vehicle has the ignition connected and is not  
moving.  
●
The system should never be used in limi-  
ted visibility conditions or complicated traf-  
ꢀc, e.g., in high-traꢂic areas or when crossing  
multiple lanes.  
●
Be sure to always be aware of the vehicle's  
surroundings, since the system often fails to  
detect things such as bicycles or pedestrians.  
After switching oꢀ the ignition, the function will  
remain available for approximately 3 minutes.  
After that time, the control lamps will light up  
indicating the deactivation of the function.  
●
The rear cross traꢂic alert itself will not  
brake the vehicle to a complete stop.  
Fig. 156 On the mirror: warning lamp.  
Door opening warning  
(Exit Assist)  
Connecting and disconnecting  
The door opening warning (Exit Assist) warns  
occupants of a possible collision when open-  
ing the door when the vehicle is stationary.  
The door opening assistant can be switched on  
and oꢀ by accessing the Assistants menu in  
the infotainment system. It can also be found  
in the Park Assist Settings menu.  
How it works  
The system monitors, within the limits of  
the system itself, the rear and side environ-  
ment of the vehicle using the rear sensors  
››› page 158. It detects moving objects  
that approach from behind, such as cars  
››› Fig. 155.  
When the vehicle is restarted, the last adjust-  
ment in the system will remain active.  
WARNING  
If a critical situation is detected when the door  
is opened, an alert is given by an acoustic sig-  
nal on the door speaker of the corresponding  
●
Always pay close attention to the traꢂic  
and the surroundings of the vehicle. The  
door opening warning (Exit Assist) cannot  
replace the necessary attention to be paid  
by the vehicle’s occupants. The responsibility  
for opening the doors and exiting the vehicle  
always lies with the occupants of the same.  
side ››› Fig. 156. The side assist control lamp  
on the side of the corresponding door will also  
ꢂash. If the door has already been opened and  
another road user has been detected in a crit-  
ical situation, the control lamp of the lane de-  
parture warning on the corresponding side will  
light up permanently.  
Fig. 155 Graphic example.  
●
The door opening warning (Exit Assist) op-  
erates continuously as long as the vehicle ig-  
nition is on. Otherwise, the system is deacti-  
vated and the lamps light up brieꢁy.  
The brightness of the door opening warning  
indication cannot be adjusted.  
210  
Dooropeningwarning(ExitAssist)  
●
It is possible that the traꢂic situation is  
not interpreted correctly and you cannot be  
aware of all the objects that are approaching,  
such as pedestrians. Always visually monitor  
the traꢂic and the area surrounding the vehi-  
cle.  
WARNING  
The door opening warning (Exit Assist) is sub-  
ject to system limits and cannot warn of an  
imminent collision in all cases:  
●
If your vehicle is too deep in the parking  
space and the adjacent vehicles hide it.  
●
In certain circumstances, objects or people  
who approach, e.g. on a bicycle or scooter,  
are not detected.  
●
The system does not react to stopped ob-  
jects.  
211  

Related Topics

Popular Owner Manuals