2002-2008 Cupra Born SUV Parking and manoeuvring -> General information on parking systems User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Parking and manoeuvring -> General information on parking systems for Your Cupra Born SUV First Generation (2002-2008)

General informationonparkingsystems  
WARNING  
The Auto-Hold function will be switched on  
the next time the drive system is switched on.  
General information on  
parking systems  
The smart technology of the Auto-Hold can-  
not overcome the limits imposed by the laws  
of physics and it only operates within the lim-  
its of the system. Never allow the enhanced  
convenience of the Auto-Hold function to in-  
duce you to take any risk that compromises  
safety.  
Keeping the vehicle stopped with the Auto-  
Hold function  
Automatic brake operation  
●
Make sure that the Auto-Hold function is  
The automatic braking feature of a parking sys-  
tem is used to reduce the danger of collision  
when an obstacle is detected during a parking  
manoeuvre.  
switched on.  
●
Stop the vehicle with the brake ››› page 186.  
●
If the vehicle has to be immobilised, make  
When the Auto-Hold function is ac-  
tive, the control lamp on the instrument  
cluster lights up green.  
sure that the control lamp is lit up in  
green or in red on the instrument cluster.  
If the control lamp is green, the Auto-Hold  
function holds the vehicle; when it is red, the  
electronic parking brake holds the vehicle.  
Braking functions  
Depending on the equipment, the following  
systems are available:  
The vehicle is held at a standstill. The brake  
pedal can be released ›››  
When the vehicle starts to move or the re-  
quirements of the Auto-Hold function are not  
met, the vehicle is no longer held.  
●
Never leave the vehicle with the drive sys-  
●
Park assist plus manoeuvre braking function  
tem on and the Auto-Hold function activated  
for any reason.  
››› page 191.  
●
Rear cross traꢀic alert emergency brake  
●
The Auto-Hold cannot always keep the ve-  
function ››› page 209.  
hicle stopped on an uphill, or brake it suꢀi-  
ciently on a downhill, e.g. on slippery or icy  
surfaces.  
Switching oꢀ  
●
Automatic parking assistant emergency  
●
Switch oꢀ the Auto-Hold function in the info-  
brake function ››› page 194.  
tainment system:  
> Assistants > Smart As-  
sistants ››› page 35.  
Requirements  
NOTICE  
The Auto-Hold function can only be switched  
●
The vehicle is moving between approx.  
Always deactivate the Auto-Hold function  
before entering an automatic car wash fa-  
cility. Failure to do so could cause damage  
due to the automatic application of the park-  
ing brake.  
oꢀ when the brake is depressed ›››  
.
3 km/h and 8 km/h when manoeuvring  
●
A parking system is switched on.  
The brakes are not automatically operated  
when park assist is switched on automatically  
while moving forward.  
189  
Parking and manoeuvring  
●
Some noise sources, such as a jackhammer  
What happens in the event of automatic  
braking?  
●
Pay attention and do not rely solely on park  
or a cobblestone surface can interfere with the  
ultrasound signal.  
assist systems.  
●
Always be prepared to brake and control  
If there is an obstacle, the system brakes the  
vehicle to a standstill and keeps it stationary for  
approx. 2 seconds. Press the brake!  
●
The vehicle has some type of damage in the  
the steering yourself.  
sensor or camera area, e.g. due to a parking  
impact.  
●
Do not take any risks that compromise  
safety.  
●
The sensor detection zone or ꢁeld of view of  
●
Activate  
Act in accordance with the warnings and  
the camera are blocked by an accessory, e.g. a  
bike rack.  
driving recommendations of the parking sys-  
tems.  
●
Automatic braking is activated when the  
driver switches a parking system on.  
●
Changes have been made to the paintwork  
or structural modiꢁcations in the sensor or  
camera area, e.g. at the front of the vehicle or  
to the running gear.  
Deactivating  
Note  
●
The automatic brake operation function de-  
●
Switch oꢀ the parking system if the auto-  
matic brakes operate excessively, e.g. when  
driving oꢀ-road.  
activates when a park assist system is switched  
oꢀ.  
Also take into account the messages displayed  
on the infotainment system screen.  
●
●
After the park assist’s manoeuvre braking  
OR: to temporarily deactivate the manoeu-  
function has braked the vehicle, driving in  
the same direction for 5 metres is deactiva-  
ted, and becomes active again after changing  
gear or changing the position of the gear se-  
lector.  
vre braking function, press the function  
button on the park assist screen and change  
the setting.  
Sensor or camera without visibility, or the  
parking system has been switched oꢀ  
If a sensor fails, that sensor zone is perma-  
nently switched oꢀ. The aꢀected sensor zone  
may be displayed on the infotainment system  
with a symbol and a greyed-out graphic  
segment. If necessary, the parking system  
switches oꢀ the aꢀected zone.  
WARNING  
Never allow the automatic braking opera-  
tions of park assist systems to lead you to  
take any risk that compromises safety. In cer-  
tain situations, the automatic braking inter-  
vention may only work in a limited way or  
not work at all. Collisions with obstacles can  
injure people and damage the vehicle. The  
system is not a replacement for driver aware-  
ness.  
Troubleshooting  
The parking system behaves diꢀerently than  
expected  
If the park assist is not working properly, a con-  
tinuous audio signal sounds for a few seconds  
when it is switched on. If applicable, a message  
to this eꢀect is displayed on the instrument  
cluster screen  
There can be several causes:  
●
●
The system requirements are not met.  
The sensors or the camera are dirty or have  
ice on them ››› page 315.  
●
The camera lens is not clean and the camera  
image is not clear ››› page 315.  
190  

Related Topics

Popular Owner Manuals