2002-2008 Cupra Born SUV Parking and manoeuvring -> Electronic parking brake User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Parking and manoeuvring -> Electronic parking brake for Your Cupra Born SUV First Generation (2002-2008)

Electronicparkingbrake
When the ability to roll is activated, a message  
is permanently displayed on the instrument  
cluster display. If necessary, an audio warning  
sounds.  
Switching oꢀ  
Electronic parking brake  
●
Depress the brake pedal and select position  
D, B, R or N on the gear selector.  
Using the electronic parking brake  
●
The control lamp on the instrument clus-  
Deactivate the rolling:  
ter goes out.  
●
Press the button ››› Fig. 141. The elec-  
tronic parking brake is activated.  
Automatic application when leaving the ve-  
hicle improperly  
●
OR: switch oꢀ the ignition by pressing the  
ignition/start button.  
The electronic parking brake can be applied  
automatically if the system detects that the  
Emergency brake function  
vehicle has been left improperly ››› . The  
electronic parking brake also holds the vehicle  
in the neutral N position.  
Only use the emergency brake function in an  
emergency, if the vehicle cannot be stopped  
by pressing the brake pedal ›››  
Press and hold the button. The vehicle will  
!
Fig. 141 On the gear selector: electronic  
parking brake button.  
Activating the vehicle's ability to roll  
●
brake sharply. At the same time, an acoustic  
warning can be heard.  
If you do not want the electronic parking brake  
to be applied automatically, e.g. in a car wash  
or if you want to push or tow the vehicle,  
the vehicle’s ability to roll can be maintained  
Connecting  
●
While the vehicle is stationary, press the but-  
WARNING  
ton ››› Fig. 141.  
›››  
.
If the vehicle is left improperly, it could roll  
away. This could lead to accidents, serious  
injury and property damage.  
●
OR: when the ignition is switched oꢀ, the  
With the vehicle stationary, press down the  
brake pedal and select the N position on the  
gear selector.  
electronic parking brake is applied automati-  
cally.  
●
When parking the vehicle, always perform  
When the electronic parking brake is ap-  
plied, the control lamp on the instrument  
cluster next to the gear selector lights up  
red.  
●
Conꢁrm the message Activate rolling in the  
the appropriate operations in the indicated  
infotainment system.  
order ››› page 186, Parking.  
●
OR: open the vehicle settings in the infotain-  
ment system > Assistants > Park assist >  
Brakes and activate the function.  
●
Before leaving the vehicle, make sure that  
the electronic parking brake is applied and  
that the control lamp on the instrument  
cluster, next to the gear selector, is lit up red.  
187  
Parking and manoeuvring  
The electronic parking brake makes noises  
The electronic parking brake does not  
disconnect completely  
WARNING  
●
When the electronic parking brake is applied  
The improper use of the electronic parking  
brake can cause accidents and serious injury.  
and released, noises may be heard.  
The control lamp next to the gear selector  
ꢂashes red. The vehicle is in motion. The con-  
trol lamp also lights up on the instrument  
cluster screen.  
●
The system performs automatic and audi-  
●
Never use the electronic parking brake to  
ble checks sporadically in the parked vehicle  
if some time elapses without the electronic  
parking brake being used.  
stop the vehicle, unless it is an emergency.  
The braking distance is considerably longer.  
Always use the brake pedal.  
There is a fault in the system.  
●
Visit a CUPRA dealer or other specialist  
Auto-Hold function  
NOTICE  
workshop.  
Do not allow the electronic parking brake to  
apply automatically in an automatic car wash  
facility. This can cause damage to the vehi-  
cle.  
The Auto-Hold function holds the vehicle at a  
standstill and prevents it from moving without  
it being necessary to depress the brake pedal.  
/
There is a defect in the electronic  
parking brake  
The central warning lamp lights up yellow. The  
symbol is displayed on the instrument clus-  
ter screen with a message.  
●
Activate the vehicle’s ability to roll.  
Requirements  
●
●
The driver's door is closed.  
Visit a CUPRA dealer or other specialist work-  
shop.  
Troubleshooting  
The drive system is connected.  
When the N position is selected, the Auto-  
Hold function is not activated or, if activated,  
it deactivates. Therefore, the vehicle will not be  
The holding force in the current situa-  
tion is too small  
The electronic parking brake does not re-  
lease  
safely held ›››  
.
The control lamp next to the gear selector  
ꢂashes red. The vehicle is stopped. A message  
is also displayed in this regard on the instru-  
ment cluster screen.  
The charging connector is plugged in.  
Connecting  
OR: the 12-volt battery is discharged.  
●
●
Press  
> Assistants > Smart Assistants  
●
Use the jump start ››› page 271.  
It is not possible to park the vehicle safely on  
an uphill slope.  
Activate the Auto-Hold function.  
When the Auto-Hold function is  
switched on, the control lamp on the in-  
strument cluster lights up grey.  
●
Park the vehicle somewhere else, or on a  
level surface.  
Just because the Auto-Hold function is  
switched on does not mean that it holds the  
vehicle at a standstill ›››  
.
188  

Related Topics

Popular Owner Manuals