2002-2008 Cupra Born SUV Parking and manoeuvring -> Parking aid Plus User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Parking and manoeuvring -> Parking aid Plus for Your Cupra Born SUV First Generation (2002-2008)

ParkingaidPlus
●
Check if one of the causes indicated above  
When moving close to an obstacle, it is possi-  
ble to know if the obstacle is in front of the  
vehicle or behind it according to the sound  
frequency.  
If a rear sensor is faulty, only the obstacles in  
the front area are detected. If a front sensor is  
faulty, only the obstacles in the rear area are  
displayed. The symbol is displayed.  
has occurred.  
●
Once the source of the problem has been  
eliminated, the system may be reconnected.  
We recommend taking the vehicle to a special-  
ised workshop to have the fault repaired.  
●
If the problem persists, consult a specialised  
The approximate measurement range of the  
sensors is:  
workshop.  
A
B
C
D
1.20 m  
0.90 m  
1.60 m  
0.90 m  
Parking assist settings  
Parking aid Plus  
The indications and audible signals are set in  
the Infotainment system: function button  
Description  
> Assistants > Parking >  
> Set-  
tings.  
●
●
Automatic activation:On/oꢁ  
Front volume:Volume in the front and  
As you approach the obstacle, the frequency  
of the audible signals will increase. The signal  
will sound continuously at around 0.30 m: Stop  
the vehicle!  
rear area.  
●
●
Rear volume:Volume in the rear area.  
Reduce volume:When the parking aid is  
If the separation is maintained, the volume of  
the warning starts to decrease after about 2.5  
seconds and for the next 2.5 seconds it is fades  
away until disappearing completely.  
switched on, the volume of the audio source  
will be reduced, depending on the selected  
option.  
Fig. 142 Parking aid view on the  
Infotainment system display.  
Error messages  
If a an error or fault message is displayed on  
the instrument cluster in Park Assist, there is a  
fault.  
Parking aid plus assists the driver by giving  
visual and audio warnings about obstacles de-  
tected in front of and behind the vehicle.  
If the fault doesn't disappear before discon-  
necting the ignition, it will not be indicated  
next time the parking aid is connected.  
The bumpers are ꢀtted with sensors. When  
an obstacle is detected, it is indicated by au-  
dible signals and in the Infotainment system  
››› Fig. 142.  
191  
Parking and manoeuvring  
●
If the system warns you of the proximity of  
WARNING  
Note  
a low obstacle, please note that after being  
detected by the system, the obstacle in ques-  
tion may disappear from the measurement  
sensors as the vehicle moves closer, and the  
system will no longer warn of its presence. In  
certain circumstances, objects such as high  
kerbs that could damage the underside of  
the vehicle are not detected.  
●
Always pay attention, by looking directly,  
●
The display on the Infotainment system  
to traꢀic and the area around the vehicle.  
Assistance systems are not a replacement for  
driver awareness. Responsibility always lies  
with the driver.  
screen shows a slight time delay.  
●
In certain situations, the system can give a  
warning even though there is no obstacle in  
the detected area:  
●
The sensors have blind spots in which ob-  
–
Rough or cobbled surfaces or surfaces  
stacles and people are not detected. Pay spe-  
cial attention to children and animals.  
with long grass.  
●
If the parking distance warning system is  
–
External ultrasound sources, such as  
●
Always keep visual control of the surround-  
ignored, the vehicle could suꢀer considera-  
ble damage.  
other vehicles equipped with ultrasound  
systems.  
ings: use the mirrors for additional help.  
●
Damage to the radiator grille, bumper,  
–
Heavy rain or snow, hail or dense exhaust  
wheel arch and vehicle underbody can mod-  
ify the orientation of the sensors. This can  
aꢀect the parking aid function.  
gases.  
NOTICE  
–
If the number plate is not properly se-  
Park assist plus functions can be aꢀected by  
various factors which may cause damage:  
cured to the surface of the bumper.  
Have the function checked by a specialised  
workshop.  
–
Gradient changes.  
●
Under certain circumstances, the system  
●
In order to guarantee good operation, keep  
does not detect or display certain objects:  
●
A number plate or number plate holder  
the sensors clean, free of snow and ice, and  
do not cover them with stickers or other ob-  
jects.  
with dimensions that exceed the space for  
the number plate, or a cured or deformed  
number plate can cause false detections or a  
loss of visibility for the sensors.  
–
Chains, trailer draw bars, bars, fences,  
posts and thin trees.  
–
Objects that are located above the sen-  
●
If you use high-pressure or vapour equip-  
sors, such as protrusions in a wall.  
ment for cleaning, do not apply it directly,  
unless you do so very brieꢁy, and always keep  
a distance of more than 10 cm away.  
–
Objects with certain surfaces or struc-  
tures, such as wire mesh fences or powder  
snow.  
●
Fitting certain accessories to the front of  
●
Certain surfaces of objects and garments  
the vehicle, such as a plate holder with ad-  
vertising, may interfere with the operation of  
the Park Assist.  
do not reꢁect the ultrasound sensors' signals.  
The system cannot detect these objects or  
people wearing such clothes correctly.  
●
We recommend that you practice parking  
●
Sensor signals may be aꢀected by external  
in an area without traꢀic.  
sound sources. This may prevent them from  
detecting people or objects.  
●
The volume and tone of the signals and  
indications can be changed.  
192  
ParkingaidPlus
●
●
Switch the ignition on.  
In the infotainment system select  
Change from reduced view to full view  
Operating Park Assist Plus  
> As-  
●
Engage the reverse gear if your vehicle is  
equipped with a reversing camera.  
Switching on and oꢀ manually  
sistants > Parking > Parking aid.  
●
(
aid).  
Press button in the infotainment system  
> Assistants > Parking assist > Parking  
●
Check the Automatic activationbox.  
●
●
Press the car icon on the reduced view  
If activated automatically, an audible sound  
warning will only be given when obstacles in  
front are at a distance of less than 50 cm. ap-  
prox.  
OR: if the vehicle moves back a certain dis-  
tance (between approx. 10 and 20 cm approx  
depending on whether or not an obstacle is  
detected).  
Automatic activation  
●
●
Select reverse gear.  
If it is switched oꢁ using the button in the  
infotainment system, one of the following ac-  
tions must be taken for it to reactivate auto-  
matically:  
Switch to the reverse assist image (Rear View  
Camera “RVC”)  
OR: if you drive forward at a speed of less  
than 15 km/h (9 mph) and you encounter an  
obstacle, it is detected when it is optically ap-  
prox. less than 95 cm. away, or acoustically ap-  
prox. 50 cm. away. If the automatic connection  
is activated, a reduced display is shown.  
●
●
Select reverse gear.  
●
●
Switch oꢁ the ignition and switch it on again.  
OR: press the RVC button on the Infotain-  
ment System screen 1)  
EITHER: drive forward at over approx.  
.
15 km/h (9 mph).  
●
OR: if the vehicle moves back a certain dis-  
A short conꢀrmation signal will be heard and  
the button symbol will light up when the sys-  
tem is switched on.  
●
OR: switch the automatic activation on and  
tance (between approx. 10 and 20 cm approx  
depending on whether or not an obstacle is  
detected).  
oꢁ in the Infotainment system.  
Automatic disconnection  
When the Plus Parking Aid connects auto-  
matically, a diagram of the vehicle and the seg-  
ments will appear on screen. This function will  
be available unless the user has deactivated it.  
NOTICE  
●
Drive forward at 15 km/h (9 mph) or faster.  
Park assist plus only connects automatically  
when driving very slowly. If driving style is not  
adapted to the circumstances, an accident  
and serious injury or damage may be caused.  
Temporary sound suppression  
It only operates every time the speed drops  
below 15 km/h (9 mph) for the ꢀrst time.  
●
Press the  
function button on the infotain-  
ment screen.  
Automatic activation of park assist can be  
switched on and oꢁ in the infotainment sys-  
tem:  
●
OR: activate the electronic parking brake.  
1)  
The RVC button will only be displayed when reverse gear is engaged.  
193  

Related Topics

Popular Owner Manuals