2024-2026 Cupra Terramar SUV Driver information -> Drowsiness monitor User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver information -> Drowsiness monitor for Your Cupra Terramar SUV First Generation (2024-2026)

Driver information
25
Instrument cluster
–
–
–
–
Range: Approximate distance in km that
can still be travelled if the same driving
style is maintained.
Distance travelled: Distance covered in
km (miles) after switching on the ignition.
Average speed: The average speed will
be shown after driving for approximately
100metres.
Boost/Torque: Indicates the power and
torque of the combustion engine (does
not indicate electric mode).
Oil temperature display
The engine reaches its operating temperature
when, under normal driving conditions, the
oil temperature is between 80°C (176°F) and
120°C (248°F). If a great eort is required from
the engine and the outside temperature is
high, the engine oil temperature may increase.
This is not a problem as long as the warning
lamps
or ›››page364 do not appear
on the display.
Warning and information messages
The system runs a check on certain com-
ponents and functions when the ignition is
switched on and while the vehicle is moving.
Faults are displayed on the instrument clus-
ter display as red and yellow warning symbols
›››
page11 accompanied by messages and,
depending on the case, even an audible warn-
ing. The representation of the messages and
symbols may vary depending on the version of
the instrument cluster.
Existing faults can also be checked man-
ually. To do this, open the Vehicle status
›››
page34 menu.
Priority 1 warning (in red)
The symbol lights up or ashes (sometimes
accompanied by audible warnings). Stop
driving! Danger! Check the fault and eliminate
the cause. If necessary, seek professional as-
sistance.
Priority 2 warning (in yellow)
The symbol lights up or ashes (sometimes
accompanied by audible warnings). Operating
faults or the lack of operating uids can cause
damage to the vehicle or a fault. Check the
faulty function as soon as possible. If neces-
sary, seek professional assistance.
Reference to information in the own-
er's manual
Further information on any warnings can be
found in the owner's manual.
Information message
It provides information about processes in the
vehicle.
Accessing warnings and information
Existing faults can also be checked in the info-
tainment system:
●
Press > Vehicle > Vehicle status
›››page41.
Date and time
Setting the time on the infotainment system
●
Press > Settings ›››page36.
●
Select the menu option Date and time.
●
OR set the date and time in the instrument
cluster’s Service menu.
Service Menu
In the Service menu various settings can be
adjusted depending on the features.
Open the Service menu
●
While in Classic View, go to the circle on the
left and select the odometer, then press the
button on the multifunction steering wheel
for around 5 seconds and then release it.
●
Next, the Conguration list menu is dis-
played, where you can choose between the
Service menu or View selection from where
the instrument cluster views can be switched
on and o.
26
Driver information
Restart the service interval indicator
Select the Service menu and follow the in-
structions on the instrument cluster display.
Reset the oil service
Select the Reset Oil service menu and follow
the instructions on the instrument cluster dis-
play.
Identifying letters on engine (LDM)
Select the menu Engine code. The identifying
letters of the engine will be shown on the in-
strument cluster display.
Next Service
This species when the next workshop inspec-
tion is scheduled.
Setting the date and time
Select the Service menu and follow the in-
structions on the instrument cluster display.
Service intervals
The service interval indicator appears on the
instrument cluster display and in the infotain-
ment system.
There are dierent versions of instrument
clusters and infotainment systems, so the ver-
sions and instructions on the screens may vary.
CUPRA distinguishes between services with
engine oil change (e.g. Oil change service)
and services without engine oil change (e.g.
Inspection).
In vehicles with Services established by time
or mileage, the service intervals are already
pre-dened.
In vehicles with LongLife Service, the inter-
vals are determined individually. Thanks to
technological progress, maintenance work has
been greatly reduced. The oil only needs to
be changed when the vehicle requires it. To
calculate this change (max. 2 years), the vehi-
cle's usage conditions and individual driving
styles are considered. The advance warning
rst appears 20 days before the date estab-
lished for the corresponding service. The kilo-
metres (miles) remaining until the next service
are always rounded up to the nearest 100 km
(miles) and the time is given in complete days.
The current service message cannot be viewed
until 500 km after the last service. Prior to this,
only lines are visible on the display.
Inspection reminder
If a service or an inspection has to be carried
out soon, a service reminder will be displayed
when the ignition is switched on.
The gure shows the kilometres that can still
be travelled or the time until the next service.
Service due
When the time for a service or an inspec-
tion comes, an audible warning will be emitted
when the ignition is switched on and the xed
key symbol
may appear on the instrument
cluster for a few seconds, along with one of the
following messages:
●
Service now!
●
Please have your vehicle inspected
●
Oil change service due!
●
Oil change service and inspection due!
Consult a service notication
With the ignition switched on, the engine o
and the vehicle at a standstill, the current serv-
ice notication can be read:
Check the date of the current service on the
infotainment system:
●
Press the function button Vehicle > Vehi-
cle status > Service.
Checking the date on the digital instrument
cluster:
●
The date of the service can only be read
through the Service ›››page25 menu.
Resetting the service interval indicator
If the service was not carried out by a special-
ised CUPRA dealer or any dealer in the SEAT
network, the display can be reset as follows:

Related Topics

Popular Owner Manuals