2024-2026 Cupra Terramar SUV Driver information -> Road signs detection system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver information -> Road signs detection system for Your Cupra Terramar SUV First Generation (2024-2026)

Driver information
31
Road signs detection system
1)
Not available in all markets.
Driver attention monitor warning - Stage 3.
Serious risk identied.
An audible signal sounds. A red warning
lamp is shown on the instrument cluster
display together with a text message. Seri-
ous traic risk. Stop making operating in-
puts immediately and pay attention to the
traic.
Troubleshooting
The availability of the driver attention
monitor is restricted
An audible warning is issued. A yellow control
light appears along with a text message on the
instrument cluster display. The availability of
the driver attention monitor is restricted.
●
Fault or malfunction. Deactivate and reacti-
vate the vehicle drive system.
●
If the problem persists, visit a duly qualied
workshop. CUPRA recommends that you visit
an oicial dealer.
The driver attention monitor is
unavailable
An audible warning is issued. The yellow warn-
ing lamp lights up in the instrument cluster in
combination with the central yellow lamp. A
text message is also shown on the instrument
cluster screen and in the vehicle status menu.
●
Check the causes and corrective measures
described in the information in the driver at-
tention monitor ›››page39.
●
Fault or malfunction. Deactivate and reacti-
vate the vehicle drive system. Check the set-
tings of the driver attention monitor in the in-
fotainment system ›››page39.
●
The system limits have been exceeded.
●
If the problem persists, visit a duly qualied
workshop. CUPRA recommends that you visit
an oicial dealer.
Road signs detection sys-
tem
Introduction
The dynamic road sign display system records
standard traic signs by means of a camera
located in the upper central area of the wind-
screen, housed in the compartment at the
base of the interior mirror, and reports any
speed restrictions, overtaking prohibitions and
warning signs that it recognises
1)
.
Within its limitations, the system also displays
a additional sign to indicate aspects such as
temporary prohibitions. Even on routes with-
out signs, the system can, if necessary, display
the applicable speed limits.
Road sign recognition does not work in all
countries. Keep this in mind when travelling
abroad.
The dynamic road sign display system is activa-
ted whenever the ignition is switched on.
The additional signs are displayed on the
Head-up-Display as generic additional signs.
Shown on the display
In Germany, on motorways and normal roads
for vehicles, besides speed limits and overtak-
ing provisions the system also displays end of
restriction signs. In all other countries the cur-
rently valid speed limit is displayed instead.
The road signs detected by the system are dis-
played on the instrument cluster display and,
depending on the navigation system tted in
the vehicle, in the infotainment system as well .
Depending on the equipment, an indication is
also displayed on the Head-up-Display.
Display of road signs
After checking and evaluating the information
from the camera, the infotainment system and
actual vehicle data, the system displays up to
two current road signs, and an additional sign:
●
First: The sign that is currently valid for the
driver is displayed on the left hand side of the
screen, e.g. a prohibition of driving at over
130km/h (80mph).
32
Driver information
●
Second: Another road sign, such as a warn-
ing sign, can be displayed in second place.
●
Additional sign: If an additional sign is de-
tected, e.g. for temporary limits, it is shown be-
low the valid road sign.
The valid road sign is displayed on the Head-
up-Display by the generic additional sign.
No entry sign
The road sign recognition system gives a warn-
ing on the instrument cluster when a no entry
sign is passed on a one-way road or an en-
trance to a motorway or highway.
WARNING
The technology in the road sign detection
system cannot change the limits imposed by
the laws of physics and only works within the
system's limits. The increased convenience
provided by the dynamic road sign display
system should not lead you to take any risks.
The system is not a replacement for driver
awareness.
●
Adapt your speed and driving style to
suit visibility, weather, road and traic condi-
tions.
●
Poor visibility, darkness, snow, rain and fog
may result in the system not displaying road
signs, or not displaying them correctly.
●
If the camera’s eld of view is dirty, covered
or damaged, the operation of the system may
be aected.
WARNING
The driving recommendations and traic in-
dications shown on the road sign detection
system may dier from the actual current
traic situation.
●
The system cannot recognise or display all
road signs correctly.
●
Road signs and traic regulations have pri-
ority over the recommendations and displays
provided by the system.
Limited operation
The road sign detection system has certain
limitations. The following cases may cause the
system to function in a limited way or not at all:
●
Poor visibility, e.g. in snow, rain, fog or in-
tense mist.
●
Dazzling, e.g. caused by head-on traic or by
the sun.
●
Driving at high speed.
●
If the camera is covered or dirty.
●
If the road signs are partially or totally ob-
structed, e.g. by trees, snow, dirt or other vehi-
cles.
●
Non-compliant road signs.
●
Damaged or bent road signs.
●
Variable message signs on signalling gantries
(variable indication of road signs by LEDs or
other lighting units).
●
If outdated maps are used in the navigation
system.
●
Adhesives aixed to vehicles that depict road
signs, e.g. speed limits on lorries.
Driving with the speed warning
function
Operating conditions
The speed warning function gives warnings at
speeds above 20 km/h.
Connection and disconnection
Depending on the country, the speed warning
function is always activated when the ignition is
switched on.
If desired, you can deactivate the speed warn-
ing manually in the infotainment system:
1. Open the Assistance systems menu.
2. Switch the speed warning on or o in the
corresponding submenu.
OR: from the multifunction steering wheel:
1. Open the assistants menu by pressing but-
ton
.
2. Select and switch o the Speed warning.
Driver information
33
Road signs detection system
Activating and deactivating the audible
warning
In the infotainment system:
1. Open the Assistance systems menu.
2. Open the Speed Warning.
3. Activate or deactivate the audible warn-
ing under the corresponding option
›››page39.
Note
The audible warning is activated whenever
the ignition is switched on.
Adjusting the warning thresholds
You can manually adjust the warning thresh-
olds of the speed warning function.
In the infotainment system:
1. Open the Assistance systems menu.
2. Open the Speed Warning.
3. To select the level of the warning thresh-
olds, tap in the Overtaking warning
›››page39 menu option.
Note
When the vehicle's ignition is switched on,
the warning thresholds for the speed warning
are always reset to the default value.
Activation and deactivation of the speed
change warning tone
The speed change warning tone provides the
driver with audible information about a change
in the speed limits. If desired, you can manually
switch o the change tone.
In the infotainment system:
1. Open the Assistance systems menu.
2. Open the Speed Warning.
3. Activate or deactivate the change
tone under the corresponding option
›››
page39.
Concealing fault messages via the multi-
function steering wheel
1. Press the button on the multifunction
steering wheel.
Trailer mode
For vehicles with a factory-installed towbar and
a trailer with electrical connection to the vehi-
cle, the recognition of traic signs that may
apply to the vehicle when towing a trailer, for
example applicable speed limits and no over-
taking signs, can be activated or deactivated in
the vehicle settings menu in the infotainment
system.
In trailer mode, the recognition of valid speed
limits can be adjusted to suit the type of trailer
and country-specic legal requirements.
In the infotainment system:
1. Open the Assistance systems menu.
2. Open Trailer detection.
3. To adapt the warning threshold to the
trailer mode, tap on in the Overtaking
warning menu option.
Speed warning function warning
levels
If the system detects that the speed limit has
been exceeded, it will indicate this visually on
the instrument cluster display by ashing the
speed limit detected by the system and, de-
pending on the conguration, will also issue
an audible warning. A warning is issued at two
levels.
Fig.10 On the instrument cluster display:
violation of the detected speed limit
(illustration).

Related Topics

Popular Owner Manuals