2024-2026 Cupra Terramar SUV Driver information -> Instrument cluster operation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver information -> Instrument cluster operation for Your Cupra Terramar SUV First Generation (2024-2026)

34
Driver information
Speed warning - Level 1
Speed limit violation detected. The speed
limit detected by the system ashes continu-
ously on the instrument cluster and, depend-
ing on the equipment, on the front display
›››Fig.10.
Speed warning - Level 2
Progressive violation of the speed limit has
been detected.
An audible signal sounds. The speed limit de-
tected by the system ashes continuously on
the instrument cluster and, depending on the
equipment, on the front display ›››Fig.10.
Note
●
The second warning level is activated if the
speed remains above the limit.
●
The second warning level is cancelled again
when the driver actively reduces the speed.
Troubleshooting
Advanced road sign recognition is
not available
A yellow control lamp appears on the instru-
ment cluster display in combination with the
central yellow lamp. A text message is also
shown on the instrument cluster display and
in the vehicle status menu.
Road sign detection system messages:
●
“Dynamic road sign assist: please clean the
windscreen.”
–
The windscreen is dirty in the area of the
camera or the camera view is impaired by
weather conditions. Clean the windscreen
›››page394.
–
The camera's view is impaired by added
parts or stickers. Keep the area around the
camera clear ›››page194.
–
The camera has been moved or damaged,
for example due to damage to the wind-
screen. Check whether the damage can be
seen.
●
“Error: dynamic road sign assist”
–
There is a fault in the system. Have the
system checked by a specialised workshop.
●
“Speed warning is currently unavailable”
–
The speed warning function of the road
sign detection system is faulty. If the problem
persists, have the system checked by a speci-
alised workshop.
●
“Dynamic road sign assist currently restric-
ted”
–
The navigation system is not transmitting
data. Check if the navigation system has up-
dated maps.
–
OR: the vehicle is in a region not included
on the navigation system's map.
If the problem persists, have the system
checked by a specialised workshop.
Outside the operating region for advanced
road signs recognition
A message appears on the instrument cluster
display with the following text “Road sign as-
sist: outside the usage area”.
●
No data available for this region. The ad-
vanced road signs recognition system is not
supported in the country you are currently
driving in.
Speed warning system partially deacti-
vated
A white control lamp is shown on the instru-
ment cluster display. The default conguration
of the speed warning has been changed:
●
Check whether the speed warning is
switched o ›››page32.
●
Check if the audible warning is activated
›››page32.
●
Check if the default warning threshold has
been changed ›››page32.
Instrument cluster opera-
tion
Introduction
With the ignition switched on, it is possible to
read the dierent functions of the display by
scrolling through the menus.
Driver information
35
Instrument cluster operation
In vehicles with multifunction steering wheel,
the multifunction display can only be operated
with the steering wheel buttons.
Some menu options can only be read when
the vehicle is at a standstill.
Instrument panel menus
The number of menus and information items
available will depend on the vehicle’s electron-
ics and features.
●
Vehicle status ›››page25.
●
Driving data ›››page24.
●
Assist systems.
–
Front Assist On/O ›››page211
–
ACC (only display) ›››page204
–
Lane Assist On/O ›››page215
–
Travel Assist ›››page218
–
Side Assist On/O ›››page222
–
Speed warning On/O ›››page32
●
Navigation.
●
Audio.
●
Telephone.
WARNING
Distracting the driver in any way can lead to
an accident and cause injuries.
●
Never use the menus on the instrument
panel display while the vehicle is in motion.
NOTICE
After charging or changing the 12-volt bat-
tery, check the system settings. If the power
supply is interrupted, the system settings
might be incorrect or deleted.
Operation using the multifunction
steering wheel
Fig.11 Right side of multifunction
steering wheel: buttons to the menus and
informative indications on the instrument
panel (depending on the version).
As long as a priority 1 ›››
page25 warning
is active, it will not be possible to access any
menu. Some warnings can be conrmed and
hidden with the
button of the multifunction
steering wheel ›››Fig.11.
Select a menu or an informative display
●
Switch the ignition on.
●
If a message or vehicle symbol is displayed,
press the button ›››Fig.11; several times if
necessary.
●
To change menus, use or buttons.
●
To open the menu or the information dis-
played, press the button or wait a few sec-
onds until the menu or the informative display
opens automatically.
Changing menu settings
●
In the menu displayed, turn the right thumb-
wheel of the multifunction steering wheel until
the desired option of the menu is highlighted.
The option appears framed.
●
Press the button to make the required
modications. A mark indicates that the sys-
tem or function is activated.
Back to menu selection
●
Press the or button.

Related Topics

Popular Owner Manuals