2024-2026 Cupra Terramar SUV Driver information -> Instrument cluster User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver information -> Instrument cluster for Your Cupra Terramar SUV First Generation (2024-2026)

16
Driver information
1
2
3
4
5
6
7
Digital Cockpit
Fig.1 Digital Cockpit on the instrument cluster
(classic view).
Fig.2 Hybrid vehicles: Digital Cockpit on the
instrument cluster (classic view).
Control and warning lamps ›››
page11.
Rev counter ›››page18.
Powermeter (hybrid vehicles)
›››page21.
Gear engaged or selector lever position
›››page177.
Screen displays ›››page23.
Speedometer.
Digital speed display.
Information proles ›››page17.
Driver information
17
Instrument cluster
1)
Depending on the version.
The Digital Cockpit is a digital instrument clus-
ter with a high-resolution TFT colour screen. It
has a 4 views accessible using the button
of
the multifunction steering wheel.
By selecting dierent information proles, in-
dications other than the classic circular instru-
ments can be displayed, such as navigation
data, multimedia information or travel data.
The 4 views are:
●
Classic
●
Dynamic
●
Navigation
●
CUPRA
All views will display information on the screen
about audio, phone, travel data, vehicle status,
navigation
1)
and driving aids
1)
.
Information proles
The
/ buttons on the multifunction steer-
ing wheel can be used to browse through the
dierent Digital Cockpit information.
Information on the vehicle status, travel data
and odometer will be displayed on the left side.
On the right side information will be displayed
on: audio, telephone, compass, navigation
manoeuvres and the G-force meter.
Depending on the view in the middle of the
Digital Cockpit information about the following
will be displayed:
●
Classic View and Dynamic View: Initial data,
date, distance travelled and range. Turning the
right thumbwheel on the multifunction steer-
ing wheel: navigation map, driving data (press-
ing switches between the dierent memo-
ries).
●
Navigation View: By pressing the button
on the multifunction steering wheel and then
turning the thumbwheel you can zoom into
or out of the map. If you press the button
again, the map returns to automatic scale.
●
CUPRA view: The revolutions tube is dis-
played in the centre.
Classic and Dynamic View:
The revolutions per minute and speedometer
needles appear in full length if you press and
hold the button on the multifunction steer-
ing wheel, regardless of the menu displayed in
the central area ›››Fig.1 , ›››Fig.2.
Pressing and holding the button again re-
turns the display to the previous view.
Or look in the instrument cluster menu for the
Close option using the right hand thumb-
wheel on the multifunction steering wheel, and
then press .
Information that may be displayed in the
central area of the Digital Cockpit speedom-
eter
●
Audio
●
Telephone
●
Compass
●
Navigation indications (the most recent des-
tinations are displayed by pressing the arrow
on the right of the multifunction steering
wheel)
●
G-force meter.
●
> (close classic view).
Information that may be displayed in the
central area of the Digital Cockpit rev coun-
ter
●
Consumption and average consumption. By
pressing the arrow on the left of the multifunc-
tion steering wheel, you can switch between
the dierent travel data memories.
●
Range (fuel tank level).
●
Lubricating oil and coolant temperature
●
Average speed. By pressing the arrow on the
left of the multifunction steering wheel, you
can switch between the dierent travel data
memories.
18
Driver information
1)
Depending on version.
2)
Only in the CUPRA view on the instrument cluster.
●
Other travel data: km travelled and driving
time. By pressing the arrow on the left of the
multifunction steering wheel, you can switch
between the dierent travel data memories.
●
Assist systems.
●
Engine power and torque.
●
> (close classic view).
CUPRA view
Turning the right hand thumbwheel on the
multi-function steering wheel scrolls through
the following information displayed in the mid-
dle of the rev counter:
●
Speed and gears.
●
Lap timer.
The following information is displayed outside
the rev counter circle:
●
Right-hand area: G-force meter.
●
Left-hand area: engine power and torque.
Rev counter
The rev counter indicates the number of en-
gine revolutions per minute.
Together with the gear-change indicator, use
the rev counter to make sure you are running
your vehicle's engine at a suitable speed.
The beginning of the red zone of the rev coun-
ter indicates the maximum speed in any gear
after running-in and with the engine hot. How-
ever, it is advisable to move the selector lever
to D or lift your foot o the accelerator before
the needle reaches the red zone ›››
.
We recommend that you avoid high revs and
that you follow the recommendations on the
gear-change indicator. See the additional in-
formation in ›››page161, Selecting the op-
timal gear.
Speed limiter
1)
If the indicator light
turns on, the engine will
be automatically limited to the speed shown on
the instrument cluster. This protects the en-
gine components in situations such as a cold
start or against overheating.
The engine speed limiter is released as soon as
the engine reaches normal operating temper-
ature and the driver takes his/her foot o the
accelerator.
If the engine speed limit is caused by an engine
management fault, the indicator lamp also
lights up. Make sure the displayed RPM is not
exceeded (for example, by reducing it). Go im-
mediately to a specialised workshop to have
the fault repaired.
Flashing indicator
1)2)
The ashing indicator warns the driver that the
engine RPM limit has been reached.
The ashing indication is displayed in the up-
per areas of the rev counter by green, yellow
and red areas.
When the RPM approaches the limit, the ash-
ing indicator ashes red. Shift up a gear at the
right time.
NOTICE
●
To prevent damage to the engine, the rev
counter needle should only remain in the red
zone for a short period of time.
●
When the engine is cold, avoid high revs
and heavy acceleration and do not make the
engine work hard.
For the sake of the environment
Changing up a gear early will help you to
save fuel and minimise emissions and engine
noise.
Driver information
19
Instrument cluster
Fuel gauge
Fig.3 Fuel gauge located in dierent
positions depending on the view.
1
Reserve
2
Fuel level
Control lamps
Lights up yellow. Fuel tank almost
empty. The fuel reserve level has been
reached ›››
. Refuel as soon as you
have the opportunity.
The display only works when the ignition is
switched on.
The fuel range is displayed on the instrument
cluster.
You can consult the tank capacity of your vehi-
cle in ›››page411.
WARNING
When driving with low fuel, the vehicle may
stall in traic and cause accidents and severe
injuries.
●
If the fuel tank level is too low, fuel
could reach the engine irregularly, particu-
larly when driving up or down slopes.
●
The steering system and the assistant sys-
tems and brakes do not work when the en-
gine is running irregularly or switches o due
to lack of fuel or an irregular fuel supply.
●
CUPRA recommends always refuelling
when the tank is approximately one quarter
full, to prevent the vehicle from stopping due
to a lack of fuel.
NOTICE
Never run the fuel tank completely dry. An
irregular fuel supply can cause misring and
unburnt fuel could enter the exhaust system.
The catalytic converter or the particulate l-
ter may get damaged!
Note
The small arrow on the fuel gauge next to the
fuel pump symbol points towards the side of
the vehicle with the fuel tank ap.
Battery level indicator
✓ Valid for: hybrid vehicles
Fig.4 Digital instrument cluster: battery
level indicator.
1
Reserve
2
Battery level
The small arrow next to the battery symbol on
the fuel gauge indicates which side of the vehi-
cle the charging cover is on.
NOTICE
●
Never drive with the tank completely
empty. Under certain circumstances, the en-
ergy stored in the high-voltage battery may
not be suicient to reach the nearest service
station.
●
When the outside temperature is very low,
and therefore the high-voltage battery is
very cold, you may have diiculty starting the
internal combustion engine and the range in
electric driving mode may be reduced.
20
Driver information
Coolant temperature indicator.
The coolant temperature view can be selected
in the corresponding menu ›››
page16.
Control and warning lamps
Fault in the engine coolant system
The LED ashes red.
Engine coolant
The lamp lights up red.
The motor coolant temperature is too
high or the motor coolant level is too
low.
●
Stop driving! Stop the vehicle at the rst
opportunity and in a safe place.
●
Switch o the engine and let it cool down.
●
Check the coolant level in the coolant ex-
pansion tank ›››page356.
If the warning lamp does not go out even
though the motor coolant level is correct, do
not continue to drive or leave the engine run-
ning. Seek specialist assistance.
Control and warning lamps (valid for hybrid
vehicles)
together
with
Fault in the high-voltage cool-
ing circuit
The warning lamps ash red.
Engine coolant
The lamp lights up red.
Engine or high-voltage system
coolant level too low, engine or
high-voltage system coolant tem-
perature too high.
●
Stop driving! Stop the vehicle at the rst
opportunity and in a safe place.
●
Switch o the engine and let it cool down.
●
Check the coolant level in the coolant ex-
pansion tank ›››page356.
●
Check the coolant level in the high-voltage
cooling circuit ›››page356. If the level is too
low DO NOT add coolant. Seek specialist as-
sistance immediately.
If the warning lamp does not go out even
though the motor coolant level is correct, do
not continue to drive or leave the engine run-
ning. Seek specialist assistance.
NOTICE
●
To ensure a long useful life for the engine,
avoid high revs, driving at high speed and
making the engine work hard for approxi-
mately the rst 15 minutes when the engine
is cold. The engine's warming-up phase also
depends on the outside temperature. If nec-
essary, use the engine oil temperature as a
guide ›››page24.
●
Additional lights and other accessories in
front of the air inlet reduce the cooling eect
of the coolant. At high outside temperatures
and high engine loads, there is a risk of the
engine overheating.
●
The front spoiler also ensures proper distri-
bution of the cooling air when the vehicle
is moving. If the spoiler is damaged this can
reduce the cooling eect, which could cause
the engine to overheat. Seek specialist assis-
tance.
Driver information
21
Instrument cluster
A
B
C
1
2
3
Power meter
✓ Valid for: hybrid vehicles
Fig.5 Digital instrument cluster: Power
meter
The following displays can be seen on the
Power meter: ›››
Fig.5.
Green zone (Charge). The vehicle recov-
ers electrical energy.
Blue zone (Power %). Driving in Electric
Mode. Indicates the percentage of power
used and the maximum amount of power
currently available.
Revolutions per minute of the combustion
engine when in operation.
The power meter shows the usage level of the
electric drive. The power meter bar shows the
current usage level.
A ner coloured border indicates how much
the propulsion can currently be used. Depend-
ing on the selected driving program and the
current availability of electrical power, the
boundaries of the dierent colours can vary.
Availability of Boost on screen
When the engine is started, the “READY” warn-
ing light goes out and the instrument cluster
displays Boost availability indications with in-
formation about the additional power available
at that time.
Fig.6 In the digital instrument cluster: Boost
availability display
Additional power available.
Additional power not available.
Boost additional power activated.
If rapid acceleration is requested (e.g. by Kick-
Down) the Boost function will be activated and
the vehicle will drive for a short period of time
with maximum power from the electric motor
and combustion engine. This is indicated by
the area below the RPM indicator turning blue.
Note
The Boost function consumes a large
amount of energy and is therefore only avail-
able for a short period of time.
WARNING
When the electrical system has a reduced
performance capability, it can cause a
change in the vehicle’s handling, such as
a dierent acceleration response. This can
cause accidents and serious or even fatal in-
juries.
●
Always adapt your speed and driving style
to suit the visibility, weather, road and traic
conditions, as well as the charge level of the
high-voltage battery.
●
Make sure that the high-voltage battery is
suiciently charged.
22
Driver information
Head-up-Display (HUD)
Fig.7 In the driver’s eld of view: Proximity
HUD
1
.
The Head-up-Display (HUD) projects certain
information or warnings from assistance sys-
tems or the infotainment system into the driv-
er’s eld of view.
Display areas
Explanations of the areas displayed on the
Head-up-Display ›››
Fig.7:
●
Proximity HUD. Information on speed, navi-
gation and driver assistant systems is displayed
on the proximity HUD
1
.
The amount and content of the information
displayed may vary depending on the equip-
ment.
Switching the Head-up-Display on and o
The Head-up-Display can be switched on and
o in the infotainment system’s vehicle set-
tings menu.
●
Press the Vehicle function button.
●
In Vehicle, select the Interior view and press
the Head-up-Display function button.
●
Switch the Head-up-Display on or o as de-
sired. Activated functions are highlighted in
colour.
Height setting
To adapt the vertical position of the image to
your individual seating position, the Head-up-
Display can be set in the infotainment system’s
vehicle settings menu.
1. Sit comfortably on the seat.
2. In the vehicle settings of the infotainment
system you can also adjust the rotation of
the proximity area.
Infotainment system settings
Further settings of the Head-up-Display can
be changed in the vehicle settings menu of the
infotainment system.
The following settings can also be adjusted:
In the Head-up-Display settings submenu:
●
Adjustment of the light intensity of Head-up-
Display indications. The intensity is automat-
ically reduced as the ambient brightness de-
creases. The basic brightness is adjusted via
the Head-up Display's settings menu.
●
Selection of the indications to be shown on
the Head-up-Display, e.g. driver assistant sys-
tem indications.
●
There is an alternative combination of col-
ours for the Head-up-Display for adverse
weather conditions, e.g. if it snows.
Note
●
Some indications, such as warnings, cannot
be hidden.
●
For optimal viewing of the display, correctly
adjust the seat and the height of the Head-
up-Display.
●
Light falling on it can cause reections.
Wearing sunglasses with polarizing lters
may prevent you from seeing the indications
properly.
●
Only clean the Head-up-Display with a soft
cloth and a mild cleaning product. Microbre
cloths can scratch the Head-up-Display.
Driver information
23
Instrument cluster
Status display
Possible indications on the instrument clus-
ter display
The instrument cluster can display a variety of
information, superimposed according to the
vehicle's equipment:
●
Doors, bonnet and rear lid open
●
Warning and information messages
●
Odometer
●
Time ›››page25
●
Indications of the radio and navigation sys-
tem
●
Phone indications
●
Outside temperature
●
Compass indication
●
Selector lever positions
●
Gear-change recommendation
●
Combined range (hybrid vehicles)
●
Display of travel data (multifunction display)
and menus for dierent settings ›››page24
●
Service interval indicator ›››page26
●
Speed warning
●
Speed warning for winter tyres
●
Start-Stop system status display
›››page175
●
Signs detected by the road signs detection
system and warning that the speed limit has
been exceeded
●
Indication of active cylinder management
status (ACT®) ›››page161
●
Low consumption driving
●
Driver assist systems display
Doors, bonnet and rear lid open
When the vehicle is unlocked and while driv-
ing, the instrument cluster display shows if any
of the doors, the bonnet or rear lid are opened
and. In some cases this is also indicated by an
audible warning.
Selector lever positions
The current position of the selector lever is
shown on the side of the control and on the
instrument cluster display. When the control is
in the D/S position or in the Tiptronic position,
in some cases, the gear engaged in each case
is shown on the instrument cluster display .
Outside temperature indicator
If the outside temperature is lower than ap-
proximately +4°C (+39°F), the “ice crystal sym-
bol”
also lights up on the outside tempera-
ture indicator. This symbol remains lit until the
outside temperature exceeds +6°C (+43°F)
››› .
In the following situations, the displayed out-
side temperature may be higher than the ac-
tual temperature due to the heat emitted by
the motor:
●
When the vehicle is stationary
●
When driving very slowly
Gear-change recommendation
While driving, the instrument cluster of certain
vehicles may indicate a gear recommendation
for saving fuel ›››page161.
Odometer
The odometer registers the total distance trav-
elled by the car.
Speed warning for winter tyres
If the maximum set speed is exceeded, this is
displayed on the instrument cluster display.
The speed warning can be set in the infotain-
ment system ›››page39.
Low consumption driving
Depending on the equipment, when driving,
the display appears on the instrument clus-
ter when the vehicle is in low consumption sta-
tus due to active cylinder management (ACT®)
›››
page161.
24
Driver information
–
–
–
–
–
–
WARNING
Even when the outside temperature is higher
than freezing, some roads and bridges could
be frozen.
●
The “ice crystal symbol” indicates that
there may be a risk of freezing.
●
At outside temperatures above +4°C
(+39°F), there may be ice even when the “ice
crystal symbol” is not on.
●
The outside temperature sensor takes a
guideline measurement.
Note
●
There are dierent instrument clusters and
therefore the versions and instructions on
the display may vary. In the case of displays
without warning or information texts, faults
are indicated exclusively by the control warn-
ing lamps.
●
Some indications on the instrument cluster
display may be concealed by a sudden event,
e.g. an incoming call.
●
Depending on the equipment, some set-
tings and instructions can be changed or dis-
played on the infotainment system as well.
●
If there are several warnings at the same
time, the symbols will be displayed one after
the other for a few seconds. The symbols will
stay on until you remove the cause.
●
If warnings are shown about existing faults
when the ignition is switched on, it might not
be possible to change the settings or display
the information as described. In this case, go
to a specialised workshop and request a re-
pair.
Driving data display
The driving data display shows a range of driv-
ing data and consumption values.
Change from one display to another
●
Turn the right thumbwheel of the multifunc-
tion steering wheel ›››page35.
Changing memory
●
Depending on the view, select Driving data
and press the left arrow or the button on the
multifunction steering wheel.
Since start: The memory is deleted if the
journey is interrupted for more than 2
hours.
Since refuel: Display and storage of the
journey data and the consumption values
collected. When refuelling, the memory is
deleted.
Long-term: This memory contains travel
data up to a maximum of 19hours and
59minutes or 99hours and 59minutes, or
up to a maximum of 1999.9 km or 9999.9
km. When one of these values is exceeded
(varies depending on the version of the in-
strument cluster), the memory is deleted.
Delete journey data presets
●
Select the memory you want to delete - ei-
ther “Since start” or “Long-term”. The “Since
refuelling” memory is only cleared when refu-
elling.
●
Press and hold the button on the multi-
function steering wheel for approximately 2
seconds.
Select the instructions
On the instrument cluster, it is selected man-
ually using the button on the multifunction
steering wheel. To access the contents of the
tube, rotate the right hand thumbwheel up/
down.
Current consumption: The current fuel
consumption display operates throughout
the journey, in litres/100 km; and with the
engine running and the vehicle stopped, in
litres/hour.
Average consumption: The average fuel
consumption is displayed after driving for
approximately 300metres.
Travelling time: This indicates the hours
(h) and minutes (min) since the ignition
was switched on.

Related Topics

Popular Owner Manuals