2024-2026 Cupra Terramar SUV Miscellaneous situations User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Miscellaneous situations for Your Cupra Terramar SUV First Generation (2024-2026)

338
Miscellaneous situations
1
2
3
4
5
6
7
Miscellaneous situa-
tions
Vehicle tool kit
On-board toolkit
Fig.205 Underneath the oor panel of
the luggage compartment: on-board tools.
The vehicle tool kit is located under the oor
panel in the luggage compartment. To access
the on-board tools ›››
page316.
The tool kit includes:
Adapter for the anti-theft bolt
Towing eye, removable
Wheel wrench
Crank handle for jack
Jack
Hook for extracting the central wheel trims
Clip for removing the wheel nut caps
Some of the items listed are only provided in
certain model versions, or are optional extras.
WARNING
When the vehicle tool kit, tyre mobility set
and spare wheel are loose in the interior they
can be violently thrown in case of a sudden
manoeuvre or braking and especially in acci-
dents, causing serious injury.
●
Ensure that the vehicle tool kit, the tyre
mobility set and the spare wheel or tempo-
rary spare wheel are safely secured in the
luggage compartment.
WARNING
Unsuitable or damaged vehicle tools can
cause injury or accidents.
●
Never work with inappropriate or damaged
tools.
Note
The jack does not generally require any
maintenance. If required, it should be
greased using universal type grease.
Changing the windscreen
wiper blades
Wiper service position
Fig.206 Wipers in service position.
Fig.207 Wiper lever
Ensure that the wiper blades are not frozen.
With the wipers in service position, it is possi-
ble to the fold the wiper arms ›››Fig.206.
Miscellaneous situations
339
Changing the windscreen wiper blades
●
Close the bonnet ›››page351.
●
Switch the ignition on and o.
●
Press the windscreen button
1
(short press)
›››
Fig.207.
Before driving, always lower the wiper arms.
When the wiper lever is briey pulled upwards,
the wiper arms return to their initial position.
Note
●
The wiper arms can be moved into the re-
placement position when the front bonnet is
fully closed.
●
You can also use the service position, for
example, if you want to x a cover over the
windscreen in the winter to keep it clear of
ice.
Changing the wiper rear wiper
blades
Fig.208 Changing the windscreen wiper
blades
The windscreen wiper blades are supplied as
standard with a layer of graphite. This layer is
responsible for ensuring that the wipe is silent.
If the graphite layer is damaged, the noise of
the water as it is wiped across the windscreen
will be louder.
Check the condition of the wiper blades reg-
ularly. If the wipers scrape across the glass,
they should be changed if they are damaged,
or cleaned if they are dirty ›››
.
If this does not produce the desired results,
the setting angle of the windscreen wiper arms
might be incorrect. They should be checked by
a specialised workshop and corrected if neces-
sary.
Damaged windscreen wiper blades should
be replaced immediately. These are available
from qualied workshops.
Raising and lowering windscreen wiper arms
●
Place the windscreen wipers in the service
position ›››page338.
●
Grip the wiper arms only by the blade's fas-
tening point.
Cleaning the windscreen wiper blades
●
Raise the wiper arms.
●
Use a soft cloth to remove dust and dirt from
the windscreen wiper blades.
●
If the blades are very dirty, a sponge or damp
cloth may be used ››› .
Changing the windscreen wiper blades
●
Lift and unfold the wiper arms.
●
Press and hold release button ›››Fig.208
1
and pull gently on the wiper blade in the
direction of the arrow.
●
Fit a new wiper blade of the same length
and design on to the wiper arm and hook it
into place.
●
Rest the wiper arms back onto the wind-
screen.
340
Miscellaneous situations
Changing the rear window wiper blade
●
Separate the wiper arm from the rear win-
dow.
●
Remove the blade from the holder below the
centre. During this operation, hold the wiper
arm rmly.
●
Fit the new blade (of the same length and
type) into the housing of the wipe arm by
pressing it in place. When doing so, hold the
wiper arm by the upper end.
●
Fold the wiper arm and rest it on the window.
WARNING
Worn or dirty windscreen wiper blades re-
duce visibility and increase the risk of acci-
dent and serious injury.
●
Always replace damaged or worn wind-
screen wiper blades or blades that no longer
clean the windscreen properly.
NOTICE
●
Damaged or dirty windscreen wipers could
scratch the glass.
●
If products containing solvents, rough
sponges or sharp objects are used to clean
the blades, the graphite layer will be dam-
aged.
●
Never use fuel, nail varnish remover, paint
thinner or similar products to clean the win-
dows.
●
In icy conditions, always check that the
wiper blades are not frozen to the glass be-
fore using the wipers. In cold weather, it may
help to leave the vehicle parked with the wip-
ers in service position ›››page338.
NOTICE
●
To prevent damage to the bonnet and the
wiper arms, only leave them in the service
position.
●
Before driving, always lower the wiper
arms.
Jump start
Introduction
If the engine fails to start because of a dis-
charged 12-volt battery, the battery can be
connected to the battery of another vehicle to
start the engine.
Jump leads complying with the DIN 72553
standard are needed for starting (see cable
manufacturer's instructions). The wire cross
section must be at least 25 mm
2
for petrol en-
gines and at least 35 mm
2
for diesel engines.
NOTICE
To avoid considerable damage to the vehicle
electrical system, take careful note of the fol-
lowing:
●
If the jump leads are connected incor-
rectly, a short circuit may occur.
●
Use only jump leads with fully insulated
clamps.
●
Do not allow the vehicles to come into con-
tact with each other, otherwise current may
start to ow as soon as the positive poles are
connected.
Jump start socket (ground termi-
nal)
Fig.209 In the engine compartment: jump
start socket (ground terminal).
Miscellaneous situations
341
Jump start
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
The jump start socket (ground terminal) is
used for connecting the black jump lead
›››Fig.209
A
.
Only use this socket (ground terminal) in your
vehicle when jump starting.
Jump start: description
Fig.210 Jump lead connection diagram.
The discharged battery must be properly con-
nected to the on-board network.
Make sure that the clamps have suicient
metal contact when connecting them to the
poles.
Jump lead terminal connections
The jump leads should only be connected in
the order 1 > 2 > 3 > 4 ›››
Fig.210.
Switch o the ignition of both vehicles
›››
.
Connect one end of the red jump lead to
the positive
+
terminal of the vehicle with
the at battery
A
.
Connect the other end of the red jump
lead to the positive terminal
+
in the vehi-
cle providing assistance
B
.
Connect one end of the black jump lead
C
to a suitable ground terminal, to a solid
piece of metal in the engine block, or to
the motor block itself.
Connect the other end of the black jump
lead
D
to a suitable ground terminal, a
solid metal component bolted to the en-
gine block or to the engine block itself of
the vehicle with the at battery. Do not
connect it to a point near the battery.
Position the leads in such a way that they
cannot come into contact with any rotat-
ing part in the engine compartment.
Starting
Start the engine of the vehicle supplying
the current and leave it running at idle.
Start the engine of the vehicle with a dis-
charged battery and wait 2 to 3 minutes
until the engine runs.
Disconnecting the jump leads
Before disconnecting the jump leads,
switch o the dipped beam headlight if it
is on.
Turn on the heating fan and the vehicle's
heated rear window when the battery is
discharged to reduce the voltage peaks
that occur while disconnecting the bat-
tery.
While the engines are still running, discon-
nect the cables in the reverse order in
which they were connected.
If the engine does not start after 10 seconds,
wait for approximately 1 minute and then try
again.
WARNING
●
Please note the safety warnings referring
to working in the engine compartment
›››page351.
●
The battery supplying the current must
have the same voltage (12V) as the at bat-
tery. Failure to comply could result in an ex-
plosion.
●
Never use jump leads when one of the bat-
teries is frozen. Danger of explosion! Even
once thawed, electrolyte leaks can cause
burns. Replace the battery if it is frozen.
●
Keep any sources of ignition (ames, ciga-
rettes, etc.) far enough away from the batter-
ies. They may cause an explosion.
342
Miscellaneous situations
●
Observe the usage instructions of the jump
lead manufacturer.
●
On the other vehicle, do not connect the
negative cable directly to the negative ter-
minal of the discharged battery. Any sparks
could ignite the igniter gas coming out of the
battery and could cause an explosion.
●
The negative wire must never be connec-
ted to fuel system components or brake lines
on the other vehicle.
●
Do not touch uninsulated parts of the pole
clamps. The jump lead attached to the posi-
tive battery terminal must not touch metal
parts of the vehicle, this can cause a short
circuit.
●
Jump leads must be placed in such a way
that they cannot be caught by rotating parts
in the engine compartment.
●
Do not rest your body on the batteries, as
this could cause burns.
●
Take into account the instruction manual
of the jump lead manufacturer and the in-
struction manual of the other vehicle.
NOTICE
Immediately go to a specialist workshop and
have the 12volt battery checked.
Towing the vehicle
Introduction
It takes practice to tow a vehicle, especially
when using a tow cable. Both drivers should be
well informed of the special features of towing.
Inexperienced drivers should refrain from tow-
ing.
During towing, make sure at all times that no
inadmissible pulling forces or jolts are caused.
On roads without a rm surface there is always
the danger of overloading the attachment
parts.
Take into account the legal provisions regard-
ing tow starting and towing.
Tow start
Tow starting means starting a vehicle's engine
while another puts it in motion by pulling it.
Due to technical reasons, tow starting the ve-
hicle is not allowed if it has an automatic gear-
box.
Towing
Towing means a vehicle pulling another vehicle
that is not in a condition to drive.
The vehicle can be towed with a tow bar or
cable.
●
The speed limit is 50km/h (30 mph).
●
The maximum permitted distance is 50km
(30 miles).
Tow cable and tow bar
It is safer for the vehicle to be towed using a
tow bar, avoiding damage to the vehicle. The
tow cable should only be used if a tow bar is
not available.
A tow rope should be slightly elastic to avoid
damage to both vehicles. It is advisable to use
a tow rope made of synthetic bre or similarly
elastic material.
Towing with a tow truck
If a tow truck is used:
Fig.211 Transport with a tow truck: front-
wheel drive vehicles.
Miscellaneous situations
343
Towing the vehicle
Fig.212 Transport with a tow truck: all-
wheel drive vehicles (4Drive)
Towing vehicles with four-wheel drive
(4Drive)
Four-wheel drive vehicles (4Drive) can be
towed using a tow bar or tow rope. It is not per-
mitted to suspend the front or rear axle while
towing. This could damage the transmission.
Deactivate roll-away protection (vehicles
with automatic transmission) ›››
page226
If necessary, to release the parking brake so
that the vehicle can be pushed or towed:
●
Keep the brake pedal pressed down and se-
lect the N position on the gear selector. Next,
conrm Deactivate roll-away protection in
the Infotainment System.
●
OR: open the vehicle settings in the infotain-
ment system > Vehicle > Brakes > Deacti-
vate the “Roll-away protection function”.
WARNING
When towing a vehicle, the driving behaviour
and braking capacity change considerably.
WARNING
Never allow the vehicle to be towed if it has
no power.
●
When towing, never remove the key from
the ignition or disconnect the ignition with
the ignition and start button. Otherwise, the
electronic lock of the steering column could
suddenly get blocked and it would be impos-
sible to steer the vehicle. This could cause an
accident, serious injury and loss of control of
the vehicle.
●
If the vehicle runs out of power during tow-
ing, stop the process immediately and seek
the assistance of specialised personnel.
NOTICE
Towing the vehicle with a tow cable or a tow
bar can cause damage to the vehicle.
●
If the vehicle is towed with a tow cable or
tow bar, special care must be taken.
●
If possible, have the vehicle transported on
a tow truck.
NOTICE
If the vehicle is pushed by hand, the tail light
units, the side spoilers of the rear window
and large sheet metal surfaces may be dam-
aged. In addition, the rear spoiler could be
detached.
●
If the vehicle is pushed by hand, the tail
light units, the side spoilers of the rear win-
dow, large sheet metal surfaces or the rear
spoiler.
NOTICE
Removing and attaching the cover and the
towing eye may cause damage to the vehicle,
for example, on the paintwork.
●
To avoid damaging the vehicle, remove and
replace the cover and the towing eye care-
fully.
NOTICE
Using a towing eye that is not suitable for the
vehicle can damage it.
●
When towing, always use the vehicle’s tow-
ing eye, which forms part of the on-board
tools, or an appropriate eye for towing.
344
Miscellaneous situations
Instructions for tow-starting and
towing
During towing, the change of direction can be
signalled on the towed vehicle even when the
hazard warning lights are on. To do so, at the
same time, the turn signal lever must be oper-
ated with ignition switched on. During this time
the hazard warning lights remain disconnec-
ted. When the turn signal lever is returned to
the neutral position, the hazard warning lights
will be automatically reactivated.
Cases where tow starting and towing the ve-
hicle are not permitted
Do not allow the vehicle to be towed in the
following situations:
●
The vehicle’s gearbox is damaged or has no
lubricant.
●
The 12-volt battery is discharged. In vehicles
with the “Keyless Access” locking and ignition
system the steering remains locked and the
parking brake cannot be deactivated and the
steering column lock cannot be released if
they are connected.
●
If a distance above 50 km needs to be travel-
led.
●
There is no guarantee that the wheels will
turn smoothly or that the steering will work af-
ter an accident.
If the vehicle cannot be towed on its wheels for
any of the reasons mentioned above, request
assistance from specialised personnel and, if
necessary, have the vehicle transported with-
out the wheels touching the ground.
Tow start
Steps to be taken prior to tow starting
Vehicles with an automatic gearbox: Due to
technical reasons, tow starting the vehicle is
not allowed. Attempt to start the engine using
the starting aid ›››
page340.
NOTICE
When tow-starting, unburnt fuel could enter
the catalytic converter and damage it.
Towing
Preliminary steps
●
Secure the tow cable or tow bar using only
the attachment points provided for this pur-
pose ››› . Depending on the equipment,
these points may be a towing device or a tow-
ing eye.
●
Make sure the tow cable is not twisted. Oth-
erwise the towing eye could unscrew during
towing.
●
Switch on the ignition and the hazard warn-
ing lights of both vehicles. If necessary, take
into account other dierent provisions that
may exist in this regard.
●
Take into account the instructions on towing
provided in the instruction manual of the other
vehicle.
Towing vehicle (lead)
●
Do not actually start driving until the cable is
tight.
●
Accelerate with particular care.
●
Avoid sharp braking and sudden manoeu-
vres.
Vehicles with a manual gearbox:
●
When starting to drive, use the clutch very
gently.
Towed vehicle (following)
●
Make sure the ignition is switched on so that
the steering wheel does not lock and so that, if
necessary, you can use the turn signals and the
windscreen wiper.
●
The brake servo and power steering only
work when the engine is running. Otherwise,
you will have to depress the brake pedal con-
siderably harder and more force will be needed
to turn the steering wheel.
●
Release the electronic parking brake
›››page226, Using the electronic parking
brake.
Miscellaneous situations
345
Towing the vehicle
●
Make sure the tow cable is always taut.
●
Disengage the gear or place the gear selec-
tor in the N position.
WARNING
Never attach the tow rope or tow bar to axle
or running gear components. They could be
damaged, resulting in an accident and seri-
ous injury.
●
Seek specialist assistance and, if applica-
ble, have the vehicle transported on a tow
truck.
NOTICE
The vehicle can only be towed if the state of
charge of the 12-volt battery is suicient to
disengage the electronic parking brake and
the steering column lock. If the vehicle has
no power supply or there is an electric sys-
tem fault, the engine must be jump-started
to release the electronic parking brake and
deactivate the electronic lock of the steering
column.
Front towing eye
Fig.213 Front bumper on right: remove the
lid.
Fig.214 Right side of the front bumper:
towing eye screwed in.
The housing of the removable towing eye is on
the right side of the front bumper underneath
a cover ›››
Fig.213.
The towing eye should always be kept in the
vehicle.
Bear in mind the instructions for towing
›››
page344.
Fitting the towing eye
●
Remove the towing eye from the vehicle tool
kit in the luggage compartment ›››page338.
●
Remove the cover by pressing down on its
base and leave it hanging from the vehicle
›››Fig.213.
●
Screw the towing eye in the housing by
turning it to the maximum anticlockwise
›››Fig.214 , ››› . Use a suitable object
that can completely and securely tighten the
towing eye in its housing.
●
After towing, unscrew the towing eye clock-
wise with a suitable object.
●
Replace the cover and push it in until it clicks
into place.
●
Clean the towing eye if necessary and then
store it in the luggage compartment along with
the other vehicle tools.
NOTICE
The towing eye must always be completely
and rmly tightened. Otherwise, it could
jump out of the housing during towing.
346
Miscellaneous situations
Rear towline anchorage
Fig.215 Rear bumper on right: remove the
lid.
Fig.216 Right side of the rear bumper:
towline anchorage screwed in.
The housing of the screw towing eye is on
the right side of the rear bumper behind a lid
›››
Fig.215.
Vehicles tted as standard with a towing
bracket do not have any housing for the screw
towing eye behind the lid. In this case, the tow
hitch needs to be extracted or installed and
used for towing ›››
page322 , ››› .
Bear in mind the instructions for towing
›››page344.
Assemble the rear towing eye (cars without a
factory-equipped towing bracket)
●
Remove the towing eye from the vehicle tool
kit in the luggage compartment ›››page338.
●
Press the upper side of the lid ›››Fig.215 to
unclip it.
●
Remove the lid and let it hang from the vehi-
cle.
●
Screw the towing eye in the housing by
turning it to the maximum anticlockwise
›››Fig.216 , ››› . Use a suitable object
that can completely and securely tighten the
towing eye in its housing.
●
After towing, unscrew the towing eye clock-
wise with a suitable object.
●
Replace the cover and press until the tab
snaps into the bumper.
●
Clean the towing eye if necessary and then
store it in the luggage compartment along with
the other vehicle tools.
NOTICE
●
The towing eye must always be completely
and rmly tightened. Otherwise, it could be
released while towing and tow-starting.
●
If the vehicle is factory-equipped with a
towing bracket, it is only allowed to tow with a
tow bar if this has been specially designed to
be installed with a tow hitch. If an unsuitable
tow bar is used, both the tow hitch and the
vehicle may be damaged. Instead, a tow rope
should be used.
Fuses
Introduction
In general, a fuse can be assigned to various
electrical components. Likewise, an electrical
component can be protected by several fuses.
Only replace fuses when the cause of the
problem has been solved. If a newly inserted
fuse blows after a short time, you must have
the electrical system checked by a specialised
workshop as soon as possible.
Miscellaneous situations
347
Fuses
WARNING
The high voltages in the electrical system can
give serious electrical shocks, causing burns
and even death!
●
Never touch the electrical wiring of the ig-
nition system.
●
Take care not to cause short circuits in the
electrical system.
WARNING
Using unsuitable fuses, repairing fuses or t-
ting jumpers on a live circuit without fuses
can cause a re and serious injury.
●
Never use a fuse with a higher value. Only
replace fuses with a fuse of the same amper-
age (same colour and markings) and size.
●
Never replace a fuse with a metal strip, sta-
ple or similar.
NOTICE
●
To prevent damage to the vehicle’s elec-
trical system, before replacing a fuse always
turn o the ignition, the lights and all electri-
cal components.
●
Protect the fuse boxes when open to pre-
vent the entry of dust or humidity as they can
damage the electrical system.
Note
In the vehicle, there are more fuses than
those indicated in this chapter. These should
only be replaced by a specialist workshop.
Fuses inside the vehicle
Fig.217 On the dashboard on the driver
side: lid of the fuse box.
Fig.218 Right-hand drive vehicles: fuse box
behind the glove box on the passenger side.
Left-hand drive vehicles: open the fuse box
cover under the dash panel
●
Grasp the back of the cover and remove it in
the direction of the arrow ›››Fig.217.
●
To t the cover, place it on the opposite side
and close it in the opposite direction to the
arrow until it audibly clicks into place.
Right-hand drive vehicles: opening the fuse
box inside the glove compartment
●
Open the glove compartment and, if neces-
sary, empty it.
●
Remove the cover from above ›››Fig.218
1
.
●
To t the cover, put it in place and snap on
the top. Close the glove compartment.
348
Miscellaneous situations
Identifying fuses below the dash panel by
colours
Colour
Current intensity in
amps
Light brown 5
Brown 7.5
Red 10
Blue 15
Yellow 20
White or transpar-
ent
25
Green 30
Orange 40
Red 50
NOTICE
●
Always carefully remove the fuse box cov-
ers and ret them correctly to avoid prob-
lems with your vehicle.
●
Protect the fuse boxes when open to avoid
the entry of dust or humidity. Dirt and hu-
midity inside fuse boxes can cause damage to
the electrical system.
Fuses in the engine compartment
Fig.219 In the engine compartment: lid of
the fuse box.
To open the engine compartment fuse box
●
Raise the bonnet ››› on page351.
●
Press the locking tabs to unlock the fuse box
cover ›››Fig.219.
●
Then lift the cover out.
●
To t the cover, place it on the fuse box.
Push the locking tabs down until they click au-
dibly into place.
Replace a blown fuse
Fig.220 Image of a blown fuse.
Preparations
●
Switch o the ignition, lights and all electrical
equipment.
●
Open the corresponding fuse box
›››page347, ›››page348.
Recognise a blown fuse
A blown fuse can be recognised if the metal
strip is melted ›››Fig.220.
●
Point a torch at the fuse to see if it has blown.
Miscellaneous situations
349
Fuses
To replace a fuse
●
Remove the fuse.
●
Replace the blown fuse with one with an
identical amperage rating (same colour and
markings) and identical size.
●
Replace the cover again or close the fuse box
lid.
Fuse placement
Fuses in the vehicle interior
No. Consumers/Amps
3 Trailer 25
5 Parking lock 25
6
On-board network control
unit
30
7 Air conditioning 30
8 Sunroof 25
9 Left door (front and rear) 30
10 USBs 10
11 Trailer 15
12
On-board network control
unit
40
13
On-board network control
unit
40
14 External Ethernet Amplier 40
16 Airbag 7.5
No. Consumers/Amps
18
Anti-theft control unit /
KESSY
7.5
19
Dash panel / Navigation sys-
tem interface (OCUA)
7.5
20 Phone 10
21
Rear Camera, IPA / Sur-
roundings camera / Parking
assistants / Rear bumper /
Internet connection
7.5
22
Interior rear-view mirror /
Interior mirror / Front and
forward camera / Front ra-
dars
7.5
23 Passenger seat 15
24 4x4 Haldex Control Unit 15
25
Front seat belts RGS+EBSS
left
25
26
Right-hand door (front and
rear)
30
27
Rear seat belts RGS+EBSS
right
25
28
PHEV. Switching o the high
voltage system for rescue
tasks. Identied by a yellow
label
15
29 Trailer 15
30 Radio 30
No. Consumers/Amps
31 Trailer 25
33 Driver’s seat 15
34 230V socket (150 W) 30
35
On-board network control
unit
40
36 Air conditioner fan 40
37 Electric rear lid 30
39 Heated steering wheel 10
40 Alarm horn 7.5
41 Gateway 7.5
43 Air conditioning 10
44
Diagnostics / Front courtesy
light / Adaptive lighting /
Interior mirror / Anti-theft
sensor / Electronic parking
brake
7.5
45 Steering column 7.5
46
Display / Head-up-Display
(HUD)
7.5
47 Suspension control unit 10
52
12V socket (centre console
and luggage compartment)
20
58 Park assist 7.5
350
Miscellaneous situations
No. Consumers/Amps
59
Rear-view mirror / Central
dashboard switches / Air
quality sensor / Engine
sound control unit
7.5
60 Diagnosis 7.5
61 Starter motor / EM-BOX 7.5
66 Rear window wiper 15
67
Heated rear window / Fre-
quency modulator
30
Fuse arrangement in engine compartment
No. Consumers/Amps
2
Engine control unit / ABS /
EM-BOX
7.5
3_1 EM-BOX 20
3_2
Starter / PHEV battery
charging
10
4_1 Left headlight 15
4_3 Left headlight 30
5_1 Right headlight 15
5_3 Right headlight 30
7 Automatic gearbox pump 30
9 Horn relay activation 15
10 Front windscreen washer 30
No. Consumers/Amps
11
On-board network control
unit
7.5
12
Automatic gearbox control
unit
15
14_1 Additional heating 20
14_2 Engine sound generation 7.5
16 Automatic gearbox unit 50
21 Engine control unit 7.5
22 Starter motor 30
23 Engine control unit 15
24
Engine sensors / Radiator
fan
10/15
25 Engine 10
26
Radiator grille regulation /
Tank / Three-phase genera-
tor / Engine
10
27 Lambda sensor / Engine 10
28 Engine 20
29_2 Fuel pump 20
29_3 Fuel pump 15
30 Electronic coolant pump 10
Note
●
In the vehicle, there are more fuses than
those indicated in this chapter. These should
only be changed by a specialised workshop.
●
Positions not containing a fuse do not ap-
pear in the tables.
●
Some of the equipment listed in the tables
pertain only to certain versions of the model
or are optional extras.
●
Please note that the above lists, while cor-
rect at the time of printing, are subject to
change.
Changing bulbs
Change a bulb
LED technology lights
Full-LED headlights handle all light functions
(daylight, side light, turn signal, dipped beam
and full beam) with light emitting diodes (LEDs)
as a light source.
The outdoor lighting system's LED lighting
does not require a maintenance service. If any
component fails, go to an authorised service to
have it replaced.
The fog lights, tail lights, number plate light,
side turn signals and additional brake light are
all LED bulbs. With this in mind, they should be
replaced by a technical service.

Related Topics

Popular Owner Manuals