2024-2026 Cupra Terramar SUV Miscellaneous situations -> Changing the windscreen wiper blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Miscellaneous situations -> Changing the windscreen wiper blades for Your Cupra Terramar SUV First Generation (2024-2026)

338
Miscellaneous situations
1
2
3
4
5
6
7
Miscellaneous situa-
tions
Vehicle tool kit
On-board toolkit
Fig.205 Underneath the oor panel of
the luggage compartment: on-board tools.
The vehicle tool kit is located under the oor
panel in the luggage compartment. To access
the on-board tools ›››
page316.
The tool kit includes:
Adapter for the anti-theft bolt
Towing eye, removable
Wheel wrench
Crank handle for jack
Jack
Hook for extracting the central wheel trims
Clip for removing the wheel nut caps
Some of the items listed are only provided in
certain model versions, or are optional extras.
WARNING
When the vehicle tool kit, tyre mobility set
and spare wheel are loose in the interior they
can be violently thrown in case of a sudden
manoeuvre or braking and especially in acci-
dents, causing serious injury.
●
Ensure that the vehicle tool kit, the tyre
mobility set and the spare wheel or tempo-
rary spare wheel are safely secured in the
luggage compartment.
WARNING
Unsuitable or damaged vehicle tools can
cause injury or accidents.
●
Never work with inappropriate or damaged
tools.
Note
The jack does not generally require any
maintenance. If required, it should be
greased using universal type grease.
Changing the windscreen
wiper blades
Wiper service position
Fig.206 Wipers in service position.
Fig.207 Wiper lever
Ensure that the wiper blades are not frozen.
With the wipers in service position, it is possi-
ble to the fold the wiper arms ›››Fig.206.
Miscellaneous situations
339
Changing the windscreen wiper blades
●
Close the bonnet ›››page351.
●
Switch the ignition on and o.
●
Press the windscreen button
1
(short press)
›››
Fig.207.
Before driving, always lower the wiper arms.
When the wiper lever is briey pulled upwards,
the wiper arms return to their initial position.
Note
●
The wiper arms can be moved into the re-
placement position when the front bonnet is
fully closed.
●
You can also use the service position, for
example, if you want to x a cover over the
windscreen in the winter to keep it clear of
ice.
Changing the wiper rear wiper
blades
Fig.208 Changing the windscreen wiper
blades
The windscreen wiper blades are supplied as
standard with a layer of graphite. This layer is
responsible for ensuring that the wipe is silent.
If the graphite layer is damaged, the noise of
the water as it is wiped across the windscreen
will be louder.
Check the condition of the wiper blades reg-
ularly. If the wipers scrape across the glass,
they should be changed if they are damaged,
or cleaned if they are dirty ›››
.
If this does not produce the desired results,
the setting angle of the windscreen wiper arms
might be incorrect. They should be checked by
a specialised workshop and corrected if neces-
sary.
Damaged windscreen wiper blades should
be replaced immediately. These are available
from qualied workshops.
Raising and lowering windscreen wiper arms
●
Place the windscreen wipers in the service
position ›››page338.
●
Grip the wiper arms only by the blade's fas-
tening point.
Cleaning the windscreen wiper blades
●
Raise the wiper arms.
●
Use a soft cloth to remove dust and dirt from
the windscreen wiper blades.
●
If the blades are very dirty, a sponge or damp
cloth may be used ››› .
Changing the windscreen wiper blades
●
Lift and unfold the wiper arms.
●
Press and hold release button ›››Fig.208
1
and pull gently on the wiper blade in the
direction of the arrow.
●
Fit a new wiper blade of the same length
and design on to the wiper arm and hook it
into place.
●
Rest the wiper arms back onto the wind-
screen.

Related Topics

Popular Owner Manuals